Great video! Although I wish Microsoft still used plugs for rumble motors (see xbox 360 controller) as it would make life so much easier. I think as far as replacing my thumbsticks with gulikit NS51 TMR modules though, I might just bite the bullet, buy a brand new controller, and pay someone else to do it
I was doing the steps untill I needed the torque screwdriver which I realised I lost my T8 which is for the first step. Some days later I connected the controller to my PC why the back play was removed the b button miraculously worked. 😂😂 Thanks 👍👍👍 would receive
If you don’t want to go through that Hassle Do what I DID gets Some alcohol from your local store and pour some inside the buttons that aren’t responsive as your pouring it SPAM CLICK THE BUTTONS UNTIL IT MAKES IT WAY IN THE controller then when you feel it has enough alcohol in the buttons get a blow dryer then aim it towards the buttons that arnt working to Dry it and it should work 💯 % if you have a air compressor it’ll work even better and Faster . The alcohol. Won’t damage the controller in the inside…
None of the buttons work on mine, even the d-pad and LB / RB. Cleaned it all up but still not working. I know the USB port is bent because kids. Can a dodgy USB port cause this even using batteries?
Thanks for the vid, I noticed that one of my black wires on right side had a shitty soldering joint and came off with the lightest pressure. I don’t have any flux but I heated it up enough to make the wire stick back.
Thanks man. Me and my little guy have solid controllers but I have 5 sitting in front of me with problems. Sink on an LB “but responds” FORZA 5 controller White series S controller unresponsive LB SELECT button doesn’t work on one B button doesn’t work on one Rubber caps/joysticks worn on one Bought a kit on Amazon for $11 Has 4 ALPS motors, 4 sticks, 3 torx screwdrivers and a brush To bad it’s $10 a piece for new LB / RB . I emailed Xbox corporate that I was just going to start buying the same color ones I have and return the faulty ones being I’m the little guy and no sweat of their back lol.
Please tell me if I need to do all that! I have a power A controller its like new . All buttons works but ONLY A,B, and Y that dont work! X does wors! Its verry weird
Test Your Controller: www.gamepad-tester.com
Xbox Controller Torx Screwdriver Set: amzn.to/3oLeMjs
BW 100 Electronic Contact Cleaner: amzn.to/3MJU1wM
Thanks man! Fixed my B button with the help of your video! 🤩
I tried that already and it didn't work, do you have any other fixes? The B button is the only one that is unresponsive on my controller.
Same
Same
I have the same problem with the X 😮💨
Great video! Although I wish Microsoft still used plugs for rumble motors (see xbox 360 controller) as it would make life so much easier.
I think as far as replacing my thumbsticks with gulikit NS51 TMR modules though, I might just bite the bullet, buy a brand new controller, and pay someone else to do it
Bro am a kid tryna fix my controller I can’t do that
i’m an adult who can and did lmao
And how do i fix rb and LB not working along with dpad and the whole set of buttons? LT ad RT works along with the 2 joysticks and the menu buttons
Did you figure this out ? This is exactly what’s wrong with mine right now
@@blazingcello13 Nop thinking about sending it back with warranty and let them deal with it
I was doing the steps untill I needed the torque screwdriver which I realised I lost my T8 which is for the first step. Some days later I connected the controller to my PC why the back play was removed the b button miraculously worked. 😂😂 Thanks 👍👍👍 would receive
If you don’t want to go through that Hassle Do what I DID gets Some alcohol from your local store and pour some inside the buttons that aren’t responsive as your pouring it SPAM CLICK THE BUTTONS UNTIL IT MAKES IT WAY IN THE controller then when you feel it has enough alcohol in the buttons get a blow dryer then aim it towards the buttons that arnt working to Dry it and it should work 💯 % if you have a air compressor it’ll work even better and Faster . The alcohol. Won’t damage the controller in the inside…
just no bud light
Rubbing alcohol left my controller almost back to new wtf🤯
3 bottles of Henny later and nothing!
I LOVE YOU MAN
@mystic_scythe delete the profile on the controller and reconnect the controller
Thank you! Now my B button is good as new👍👍
USB C clip give you jip? edited out of the speed run bottom board removal. Gives me hope for a project of ebay.✌✌
None of the buttons work on mine, even the d-pad and LB / RB. Cleaned it all up but still not working. I know the USB port is bent because kids. Can a dodgy USB port cause this even using batteries?
i have the exact same problem. If u find a solution lmk
Me too
It’s so annoying 😡
😢 Same problem.. I've updated my controller my lb rb dpad a x y b not working anyone figured out how to get them to respond
Same, just woke up and it stopped working
Thanks for the vid, I noticed that one of my black wires on right side had a shitty soldering joint and came off with the lightest pressure. I don’t have any flux but I heated it up enough to make the wire stick back.
Thanks man. Me and my little guy have solid controllers but I have 5 sitting in front of me with problems.
Sink on an LB “but responds” FORZA 5 controller
White series S controller unresponsive LB
SELECT button doesn’t work on one
B button doesn’t work on one
Rubber caps/joysticks worn on one
Bought a kit on Amazon for $11
Has 4 ALPS motors, 4 sticks, 3 torx screwdrivers and a brush
To bad it’s $10 a piece for new LB / RB .
I emailed Xbox corporate that I was just going to start buying the same color ones I have and return the faulty ones being I’m the little guy and no sweat of their back lol.
Nice video, just hope it works for me!
my problem is controller a bytton not working but after some time clicking it will work agian and go again
Mine won't work i try to fix it and when i turn my xbox on it glitches on home screen like it moves by it self i cant get it to stop
Same did you find a way to fix it
No but if i had a can of bw-100 it will be fixed or if i order a whole new pcba board and moto rumbles
My buttons work now but the controller won’t come on when I put my rechargeable battery inside. What do i do?
Thanks man so much
It's good instructions
Anyone else screwed their controller even more smh 😂😢 nooooooooooooo😢
I was trying to fix my kids controller, and I couldn't get the little black cord at 2:33 to snap back in. Gonna order a new one. I'm over it.
I have a similar problem, but the whole controller isn’t responding, I can turn the controller on but that’s it, it’s also only a few months old
Mine is probably worn out now
Simply updating my controller helped
Didn’t woek
🫥
Nice video
Please tell me if I need to do all that! I have a power A controller its like new . All buttons works but ONLY A,B, and Y that dont work! X does wors! Its verry weird
Yes, try it. There is no other way to find out
Thx for the Step by Step