i couldnt resist trying it with the stock power brick. its been running stable for a day at about 160 gigahash. iput a box fan on the unit and power brick and it seems to be handleing the heat no problem. temperature 46 C and 56 C
@@garysadventuresandtreasure2806 I have recieved 120watt power brick from iceriver. Is it safe to upgrade the firmware and does this shorten the life of the miner?
@@KaranBhawnaniSini I would personally not have a problem running it with any 120 watt power supply. What will lessen the life of the miner is excessive heat so if I were you I would buy a 120mm fan for your ks0 if your going to overclock. I found one on Amazon for 10 dollars and it works great. There are many videos on TH-cam about how to do this. It’s not really necessary in the stock configuration, but if your going to overclock I highly recommend it.
At least now we know how they sell so many different variants in the same shell. Ks3 ks3m ks3Lol. Thanks for the vid. Id at least wait until roi before cooking the miner. Great info as usual Panda!
Network Difficulty now at ~30 PH/s. All those August-September shipments of ASICs came online. Bitmain KS3 is down to ~20k for the 9.4Th/s version, while I'm still seeing the ICERIVER KS3 for $25K. Freakin insane! I really hope they start slashing the prices of these KHeavyHash ASIC miners in the coming months. Sad to see the ROI of my KS2 nearly triple in just a few short weeks... 😥
I have read about people who restarted the KS0 miner after overclocking. I was able to reproduce the whole thing on one of my miners. It is a thermal problem! Since there are manufacturing differences I have my Miner times considered and a very important point is, the front and rear panel! This should not be directly at the bottom of the counter-screwed base plate, there should be a gap of about 0.5mm wide (fingernail thickness) so that an air circulation can take place here! Because this is important so that the Xilinx processor is cooled well. In my Miner which is restarted at a certain temperature, I have therefore the front and rear panel below grinded off about 0.5 mm and since then no reducible restart!
I bought and have 3 200mm Thermaltake fans on top blowing out. Saw a video that it was the more efficient way. I wonder if it's the thermal paste if it has that internally thar is.
My biggest concern was that I might shorten the lifespan of my unit, but the hash rate is increasing so quickly that in a few months it won't matter if I have a working miner or not. The time is running out to effectively mine with a KS0, and a 50% improvement is worth much more today than extending the lifespan of the miner when the network hash rate is much higher. I'm at 155 GH/s now at 57c and a 3% rejection rate.
Is the l8nk to eclipse not working for anyone else? Comes up with an error when I follow the eclipse link. Takes me to the site but errors out there saying file is not available currently.
Unfortunately, mining won't start for me. I tried the 140gh file and the reset doesn't help either. He doesn't respond to it. Maybe someone has an idea?
My KS0 came with the Lite-On 120w Power Supply. incidrthreat indicated that 120w is the bare minimum, so I'm curious if anyone has used a 120w power supply without issue? I'm thinking it's probably better to have a 150w - 180w power supply just for the extra headroom. On the other hand, if I can utilize the stock 120w PSU without issue then I'd like to save some money. If anyone has experience with this, please share your thoughts below.
Have 3 KS0's 2 show 140 and 160 but one only gets up to 102 on my Hashrate. Anyone else seeing this? I've updated to latest twice and updated to the github update and rebooted, NOTHING.
I might try it...seeing how rewards will dwindle to almost nothing, its not gonna matter if I end up damaging the thing...really dont have anything to lose to be honest
with the new firmware my hash is stable at 100gh/s temps are 48c /52c but now invalid shares. did they release a newer firmware again? or is this the same as a a month ago thanks@@kcxfiles16
Great content Red Panda, as per usual! Could you give me an quick update? Is the KS0 still going strong after the firmware upgrade and ramping up the power supply? Let me know cheers!
RPM awesome 👏 step by step brother! So I’ll like to give credit where it’s due, who made this mod? I did a diff on the updated image and mod image and it seems just a few HEX codes are changed, anyways awesome work whoever did it, Thank you.
Did you try it? I'm interested to know also. I'd imagine it would ask the psu for 120watts and the psu would only give it 90 watts (its max) which is still higher than stock 65/70watts. So I'm thinking as long as you got a fan on the psu to keep it cool there should be a slight increase. I'd guess ~120gh if 120watts is getting ~160gh, but Idk exactly what is changed in the firmware or if it would behave like I'm thinking.
I got five of mine with 120W PSU and two with 90W. Clocked those of 120W an hour ago - all running at 160GH stable. I also added 140M fans(yes with one screw only) on top and cut the red package foam from miners to lift them off the ground(8cm) for less resistance of airflow - highest temp 59 vs lowest 49. Will see what tomorrow is gonna bring lol. Hope this helps in some way.
@@sneakygonzales9382 Hey man whats the update? Im trying to update my ks0 which has come with 120Watt power brick. Im yet to update the firmware to 160GH. Its still on stock. I wanted to know if its safe and does it shorten the life of the miner? Thanks in advance
@@sneakygonzales9382 thanks man. I have upgraded it to 160GH and a fan kept as exhaust, have set 85% fan speed of the ks0 miner and 100% fan speed 120mm. Temp 1 is 45 and temp 2 is 55. And lifted above for less resistance of air
Do not use the 140ghs file because the machine will be half a brick. The update deletes many necessary files from the var folder, and if you can't replace them, you can't restart either. Factory reset doesn't help either, the machine is trash. It can be copied back later via a TCF connection.
sadly but no luck either :/ I just can't get it, why is it not working. I even swapped the PSU for a much higher wattage. tried also the Eclipse method, tried switching on and off.. Seems like I got the unbackable KS0 :D @@Innerlightforhuman
Good job, I also turned up the miner :) Temperatures are around 40℃ and 50℃. I had a 120 W power supply included, so I don't have to buy another one with more power. I think this one should be enough. What do you think?
@@余柏政 if don't see amy higher in a few hours, just try another update file, there are now three different for 120ghs, 140ghs and 160ghs, some miners might not get 160, so try lower, but I would leave for a day and see if it's really can't go higher
I@@KaranBhawnaniSini I have two running with 120w, nothing wrong, no issues, both 160ghs, had only replace to old ones where 90w psu's, but newer with 120w running no problem
**UPDATE** WEB GUI OVERCLOCK UPDATE NOW, MUCH FASTER github.com/incidrthreat/iceriver_oc/blob/main/KS0/README.md
why I update the 160 firmware, My ks0 only have 120G .... not 160G
@@isRyanyu i tried also the option 1 (160) which is much easier, but it mines 135GH/s max, ill try the option 2
@@isRyanyu silicon lottery ;à
What is their official website?
I was just thinking this morning "I bet Panda is going to come out with a video on this" 😂Thanks!
i couldnt resist trying it with the stock power brick. its been running stable for a day at about 160 gigahash. iput a box fan on the unit and power brick and it seems to be handleing the heat no problem. temperature 46 C and 56 C
Do you have 120W or 90W PSU for your KS0?
Hey are you using 120Watt Power brick?
No I used the 90 watt lite on for a couple weeks with no problems it ran fine at 115 watts. Then I upgraded to a 120.
@@garysadventuresandtreasure2806 I have recieved 120watt power brick from iceriver. Is it safe to upgrade the firmware and does this shorten the life of the miner?
@@KaranBhawnaniSini I would personally not have a problem running it with any 120 watt power supply. What will lessen the life of the miner is excessive heat so if I were you I would buy a 120mm fan for your ks0 if your going to overclock. I found one on Amazon for 10 dollars and it works great. There are many videos on TH-cam about how to do this. It’s not really necessary in the stock configuration, but if your going to overclock I highly recommend it.
At least now we know how they sell so many different variants in the same shell. Ks3 ks3m ks3Lol. Thanks for the vid. Id at least wait until roi before cooking the miner. Great info as usual Panda!
I feel like this is going to give my KS0 aids lol
I would recommend to make sure you put a fan on the top of the unit… more power = more heat
🔥 📛 👨🚒 🚒
Network Difficulty now at ~30 PH/s. All those August-September shipments of ASICs came online. Bitmain KS3 is down to ~20k for the 9.4Th/s version, while I'm still seeing the ICERIVER KS3 for $25K. Freakin insane! I really hope they start slashing the prices of these KHeavyHash ASIC miners in the coming months.
Sad to see the ROI of my KS2 nearly triple in just a few short weeks... 😥
i am really angry to myself that i bought this device instead of buying kaspa
your tipp with power suply helps me alot. thanks
Now you can try to cook an egg
Red panda you sure have a lot knowledge about miner thanks for the video
this works fine for me as well!
My Iceriver KS0 from IceRiver end of July came with a Delta 120 Watt Power Supply
I have read about people who restarted the KS0 miner after overclocking. I was able to reproduce the whole thing on one of my miners. It is a thermal problem! Since there are manufacturing differences I have my Miner times considered and a very important point is, the front and rear panel! This should not be directly at the bottom of the counter-screwed base plate, there should be a gap of about 0.5mm wide (fingernail thickness) so that an air circulation can take place here! Because this is important so that the Xilinx processor is cooled well. In my Miner which is restarted at a certain temperature, I have therefore the front and rear panel below grinded off about 0.5 mm and since then no reducible restart!
I bought and have 3 200mm Thermaltake fans on top blowing out. Saw a video that it was the more efficient way. I wonder if it's the thermal paste if it has that internally thar is.
nice one RPM, keep us updated
YOU are the Man RPM. I will have to try this out soon. Fyi, that psu u have listed on amazon is currently unavailable. U have any alternatives?
My biggest concern was that I might shorten the lifespan of my unit, but the hash rate is increasing so quickly that in a few months it won't matter if I have a working miner or not. The time is running out to effectively mine with a KS0, and a 50% improvement is worth much more today than extending the lifespan of the miner when the network hash rate is much higher. I'm at 155 GH/s now at 57c and a 3% rejection rate.
Is the l8nk to eclipse not working for anyone else? Comes up with an error when I follow the eclipse link. Takes me to the site but errors out there saying file is not available currently.
Unfortunately, mining won't start for me. I tried the 140gh file and the reset doesn't help either. He doesn't respond to it. Maybe someone has an idea?
Don't forget to increase the fan speed to 100% ^^
My KS0 came with the Lite-On 120w Power Supply. incidrthreat indicated that 120w is the bare minimum, so I'm curious if anyone has used a 120w power supply without issue? I'm thinking it's probably better to have a 150w - 180w power supply just for the extra headroom. On the other hand, if I can utilize the stock 120w PSU without issue then I'd like to save some money. If anyone has experience with this, please share your thoughts below.
Have 3 KS0's 2 show 140 and 160 but one only gets up to 102 on my Hashrate. Anyone else seeing this? I've updated to latest twice and updated to the github update and rebooted, NOTHING.
I might try it...seeing how rewards will dwindle to almost nothing, its not gonna matter if I end up damaging the thing...really dont have anything to lose to be honest
I'm having issues with eclipse process
I am trying to download the Eclipse on my MAC and it saids "File unavailable"
Does someone has done this with a MAC?
I love u,can wait to try.
Thank you RPM. Might want to ask CCXD for his spare fire extinguisher post molex/sata cable breakout board video 😋
Nice ..I'm keeping it the same for longevity.
that is smart. i'm not messing with mine either. its working ;-)dont need to upgrade.
@@ISeeDeadGamers Same. Why mess with a good thing?
Mess w it = risk of fire and burn down your home w those hot temps. Just for a little hashing. Worth the risk?!
With Iceriver new firmware. I already seem to get higher. Safer hash rates. Just upgrade power supply. Use fans. And use ETH Cat 8. Problem solved
with the new firmware my hash is stable at 100gh/s temps are 48c /52c but now invalid shares. did they release a newer firmware again? or is this the same as a a month ago thanks@@kcxfiles16
does the ks0 not work with prohashing? i have not been able to get it connected to it. i can unmineable but prohashing awards better
Thanks and very good to share knowledge and instruction step by step.
Do you have a link for the 120mm fan for cooling? If I overclock, it's gonna need extra heat dissipation for sure in addition to the PSU upgrade.
Not sure if my link will post, but here are the rgb uphere 120mm fans I am using on my ks0
@@AlteredComponent Sorry, the link didn't come through. Ill ping you on Discord and see if I can get the link there. Thanks
Great content Red Panda, as per usual! Could you give me an quick update? Is the KS0 still going strong after the firmware upgrade and ramping up the power supply? Let me know cheers!
Nice tutorial, Keep it ON~ Let me know if you see smoke tomorrow :-) , maybe we will see some KS0 Bricked soon!
RPM awesome 👏 step by step brother! So I’ll like to give credit where it’s due, who made this mod? I did a diff on the updated image and mod image and it seems just a few HEX codes are changed, anyways awesome work whoever did it, Thank you.
Nice video Panda!
More Hashrate here we come!
I’m curious to see if this decreases the life of the miner. Not sure I’m going to switch mine over yet.
I wonder what will happen if I operate it from my 90-watt unit in overclock mode?
Probably start a fire...
Did you try it? I'm interested to know also. I'd imagine it would ask the psu for 120watts and the psu would only give it 90 watts (its max) which is still higher than stock 65/70watts. So I'm thinking as long as you got a fan on the psu to keep it cool there should be a slight increase. I'd guess ~120gh if 120watts is getting ~160gh, but Idk exactly what is changed in the firmware or if it would behave like I'm thinking.
should I buy the pro, or go with etcmc???
That's cool... Considering the firmware can be changed, that means someone could wright one to mine another coin... hm
I hope so
Oh! Very nice idea! :)
my ks0 doesnt boot after this. red and green light stay on, webgui not accesible. any fix?
試著按住前面的按鈕20秒,讓他重啟回復初始狀態
Where did u get ur fans?
what exchange can you sell kas???
Anyone have any problems with fans not spinning when you do this ?
I followed everyone of the directions and it stopped working all together
Would this be safe to do with a 120w psu?
I got five of mine with 120W PSU and two with 90W. Clocked those of 120W an hour ago - all running at 160GH stable. I also added 140M fans(yes with one screw only) on top and cut the red package foam from miners to lift them off the ground(8cm) for less resistance of airflow - highest temp 59 vs lowest 49. Will see what tomorrow is gonna bring lol. Hope this helps in some way.
@@sneakygonzales9382 Hey man whats the update? Im trying to update my ks0 which has come with 120Watt power brick. Im yet to update the firmware to 160GH. Its still on stock. I wanted to know if its safe and does it shorten the life of the miner? Thanks in advance
@@KaranBhawnaniSini So far all of the OC miners are working perfectly, no decrease in cooling capabilities of thermal pad/paste that I've noticed.
@@sneakygonzales9382 thanks man. I have upgraded it to 160GH and a fan kept as exhaust, have set 85% fan speed of the ks0 miner and 100% fan speed 120mm. Temp 1 is 45 and temp 2 is 55. And lifted above for less resistance of air
A ~120GH Version with Stock Power Supply wantet.
If you find 120GH mention it to me please
still the ks0 overclock available ??
Panda: Next Idea, Immersion mining with 10 KS0
Well done
Was going to buy one but rewards are down from 65-45 KAS within a week.. RIP new Kas asic buyers. Hodl
Do not use the 140ghs file because the machine will be half a brick. The update deletes many necessary files from the var folder, and if you can't replace them, you can't restart either. Factory reset doesn't help either, the machine is trash. It can be copied back later via a TCF connection.
@patribox I have this problem at the moment. Could you please tell me how to fix? Lights come on, no fans and cannot access via webgui. :(
Will there be OC for ks0 pro?
Is this also working with KS0 Pro?
Does new psu voltage and amps number does need to be specific or just to get bigger wattage psu is enough?
Thank RPM. I already try to update. But cannot run as your device. My KS0 unit always connection lost. Need your help😂
Sorry for asking Panda Should i get 180w power supply or 230w for overclock? Thanks!❤ To be safe I think I will replace the original 90w power supply
Are the fans you are using on the KS0 to send wind or to remove heat?
imo to remove heat, bcs to send wind are down
Flashback of the LHR days 😅......Lets go!!
raraspberry pi 4 de hıveos çalıştırmak mümkünmü
Great video! But not going to try this. Ice River capped it at 100 GH for a reason.
I have updated my ks0 with the new firmware from github. But it hashes only 69-75gh and takes 119wats.. any one having same issues?
I had the same issue. I downloaded firmware from 2 miners telegram channel and updated my KS0. I am having 152 GH there after.
sadly but no luck either :/ I just can't get it, why is it not working. I even swapped the PSU for a much higher wattage. tried also the Eclipse method, tried switching on and off.. Seems like I got the unbackable KS0 :D @@Innerlightforhuman
@@Innerlightforhuman can you share that firmware .....
I need a ks1 over clock
Maybe might need the fans replaced one day. u need by Hubby after that cheap one ware out with the OC!
Hello. You mine on nicehash?
I like the idea but I don't like the "crashes and unstable system" disclaimer.
my psu from ks0 what was delliwerd is 120 w i will keep it by my 100 gh's all the miners will burn and we will have more profit 😂
You don’t need a new charger, but you need a fan. Trust me i’ve overclocked 5 KS0’s and they run at around 180GH-190GH
🔥🔥🔥
Andai saja ada firmware yang bisa menggantikannya untuk bisa menambang koin lain dari ks0 ini...
Iput the Bitmain fan on ks0 on 6000 rpm the temp is 34c. And ks0 was start walking 😂
What about watercooling?
Better yet.. immersion
did anyone try it with KS3L ?
Would worry about fire occurring at those hot temperatures. At want point do you run into fire issues?
Oh， really nice
Thank you for the explanations. Can I use the 140gh update with a 90w power supply?
Good 👍
I think 160 GH is over kill , 120 GH is more suitable for ks0, try to find setting for that ..
thanks RPM many machines will brick overclocking less difficulty to counter ever increasing difficulty 😀
I have a KAS mining pool 😇
RPM! Lets do an egg cook off! Lol!
請問第一台成功超頻,第二台也是同樣程序嗎?重來一次嗎?
now you can cook egg on it.
These disclaimers are like nobrainers for any hardware enthusiast..
I’ll wait till mine is ROI’d 😂 ditto to the egg comment though!
I won’t try i love my baby KS0. Lol.I like marathonn not sprint.
first
ASIC shiller RPM 🤣😂
Should probably disclose that he is sponsored to promote these ASICS
first comment
Ooooohhh 💩
Good job,
I also turned up the miner :)
Temperatures are around 40℃ and 50℃. I had a 120 W power supply included, so I don't have to buy another one with more power.
I think this one should be enough.
What do you think?
same here, updated through webgui with 120w, working 161-163ghs now
@@getboat I only have 120G, did i miss something?
@@余柏政 if don't see amy higher in a few hours, just try another update file, there are now three different for 120ghs, 140ghs and 160ghs, some miners might not get 160, so try lower, but I would leave for a day and see if it's really can't go higher
@@getboat Hi man! Mine is also with 120Watt power Brick. Is your power brick holding up? And does it shorten the life of the miner?
I@@KaranBhawnaniSini I have two running with 120w, nothing wrong, no issues, both 160ghs, had only replace to old ones where 90w psu's, but newer with 120w running no problem