2 questions...1. is running the node requiring same mining resources or is it different than mining? 2. how much resources (costs/day) does running a node use up on the PC? Again i thought nodes didn't require as much energy as say gpu/cpu mining.
i think it would depend on hardware for the node running cost. normally youll pull about 50w for the motherboard and then you can check how much load your cpu is under and then check the power draw of the cpu and factor that percentage. for example say your cpu is under 50% load then you can roughly calculate that your cpu power draw is 50% of the max it can draw. so you add the power draw from the motherboard and then the cpu load and that how much it cost tpo run per day. thats only for the node
@@SterlingSpecter1 ok. But do running nodes draw the same energy consumption as cpu/gpu mining? Also isn’t Kaspa only asic mining now? If so will noding still work too? Trying to differentiate between nodes and miners.
@@wadevid node can be run seperate to miners, but yes your PC will have to draw extra power if you run a miner and a node on the same PC. Also kaspa will remain gpu minable but the ASIC's are reducing the profits
I’m having a problem opening up the Casper bridge file it is not opening up. It just goes blank after you click on the run. Anyway on the windows protection PC and it’s been added to my windows. Defender Exclusion list.
advantage is that you have basically zero ping to the node, and this helps you get blocks on the network because it will favour the best connection. the disadvantage is the luck on the network solo
the benefit of mining to your own node is that your decentralizing the network.. disadvantages are that you need alot of hashrate and a fast connection speed to compete with other miners ... there is a reason why alot of pools are always hitting blocks .. its because they are peer connected to fast nodes that can push it on the network before anyone else .. addpeer in the kdx settings of whoever got the highest block when you restarts your miner .. you can find peer address in the kaspad while you sync
Possible to ask if I'm mining Abt 5 thousand kas with Asics, is it better to mine solo or pool? My experience is pool charge higher commission than they stated. Thanks all for your input
HI thanks for the infos ! i have setup everething stratum runing node , but lol miner for kas is not runing it pops : No cuda driver or GPU detected . Do i need to instal a Nvidia GPU? in order to start mining? i m wondering if i can mine kas with CPU only ?
When I try to mine to the node I set up from a different rig it shows time out lost connection not reachable..need some help tried running the bridge on the other rigs but it just go away immediately after opening.
ks bridge v1.2.0 is the bridge you need to use iceriver and in the config yaml file you can leave min share diff as default which is the min share diff for a ks3 .. or change it to 80 .. it really don't matter as long as your var_diff setting is set to true
'Kaspa is not synced, waiting for sync before starting bridge ' how long is it takes? I run it nearly 12hrs now and still can't run the bridge because it not synched. Btw thanks for the video, very informative :)
i follow all u say but at the step of lolminer i cant find the files (mine kaspa) i saw ur version is from 1 years ago so i guess it is under a othername now or i dont know can u help me about that
Lolminer says no user account or wallet to mine on config. Followed every step. Does kaspad need the miner feature enable instead of just the plain node?
Hi thanks for the video, very straight to the point :). I have a question about Ipv4 selection can i select a wireless lan and use this connection type or does it need to be through ethernet ? Thanks
i keep getting 'lost connection to stratum server trying to reconnect' on lolminer and cant seem to figure out the error. followed all the steps. also did it on your version 1.76 and the latest 1.77b
Hi there. Great video. I am having an issue though. I did everything I should, or so I think, but I keep getting a message saying "Lost connection to stratum server (IP address here) or server not reachable" Any help would be greatly appreciated. Thanks.
make sure to run the stratum alongside the node at all times. if that isnt the problem there could be an issue with your internet provider for your ip, you cant use a vpn because it would not connect to the same IP. dont use wifi, have ethernet. i cant properly solve the problem but make sure you arent doing any of the above listed but if that doesnt work, uninstall everything and re-do the setup
Hi guys, when I run the "mine_kas" file after editing, I get a message saying "all devices deselected or failed compatibility check. I am running i7-6700hq @2.60GHz 16GB RAM geforce gtx 960m. Any suggestions? Thanks!
I followed your video and I keep receive an error:All devices deselected or failed compatiblity check. Closing lolMinerPress any key to continue. I have windows 11, is thats the problem ?
@@infotec1839 sorry for the late reply but it might depend on what you are mining with, the brige is setup for gpu mining and not asic mining. there is a different bridge for asic
Thank you! I am also running this through 8 core vps. I am using it for work and besides when i am working its always on. What is the difference for how much you can min based on setting up a machine with a dedicated amd or nvidia gpu or just running on a 8 core vpw? I unded up just runing unminable for now as bz miner/ lol miner needed a gpu but was just curious if i should look to build a machine to mine kaspa and take it off the work vps and iff it would be worth it @@SterlingSpecter1
Hi, I wonder if you can assist. I have followed the instructions, bridge works great and i can see it connecting the Kas Pad. moving on i have downloaded the latest "lolMiner_v1.77b_Win64.zip" and made the changes to the file "mine_kas_with_oc" only version available. once changes where saved, i proceeded to run the aforementioned and LolMiner 1.77 appears on the screen as well as a few lines of data and not much else beyond that point. Upon checking back to the bridge i see my worker name but nothing in the avg Hashrate etc etc. Please can you advise what you thing i may have done incorrect. Many thanks
I have never encountered that problem, normally the miner doesn’t even work but yours seems to connect. If it’s connected then it should run fine but it could also be a problem with the batch file like you are running too high on overclocks or that you haven’t ran lol miner as an administrator
Hi @@SterlingSpecter1, I even tried the same older version 1.76 as that has an option of Kas without OC and the results are the same. Likewise, i have never ran LOL miner in my life before yesterday, in fact, never mined until i downloaded unmineable which works ok. I wanted to give the solo a try in case the results where better. My Pc has a AMD CPU and 4070 GPU, not the best of course but far from the worst.
under kaspa node there is cpu ming , gpu mining , self contain mining are those option working ? anyway i did the solo mining with lol miner just like you explain and it work fine , praying to get a block !!!@@SterlingSpecter1
It's not working on my pc. First off all not synchronized, after two hours still on 2023-07-25. Bridge getting exit. And mine.kas not connecting to stratum ipadress:5555 Kindly help
@@infotec1839i dont think you can min e on that laptopo unless you have an external gpu pluged in, also your hardware might not be enought to run a node
Hi, please help me. I've been trying for days to get this node syncing to the bridge but fail. I have CPU and I want to direct mine this but everything is gpu mining. The command file is my problem even when I tried ramdonX xmrig still it dont work. Please can you do a video on how to direct CPU mining a Kaspa Node, thank you?
Hi thanks for the tutorial. However I followed all the steps but when I click mine_kas.bat after saving it. it says lost connection to stratum server, how to fix this? Thanks in advance
Great video! Question: on the video you used lolMiner 1.76a, right now they have the 1.77b but the mine_kas.bat is not there… I used the one you used on video, this auto update? Or Which one i can used on the new version? My second question is what kind the maintenance i need to do with this node?
I am having problems with my windows 10 and , I get this info KASPAD: Adding uacomment=kdx_2.12.9 to arguments UPNP: ENABLED. Set "upnpEnabled": false in Settings -> Advanced -> Service Configuration to disable UPNP: Could not get public IP: Connection timed out while searching for the gateway. 2023-12-19 11:45:35.703 [INF] KASD: Version 0.12.15 2023-12-19 11:45:35.703 [INF] KASD: Profile server listening on :7000 2023-12-19 11:45:35.703 [INF] KASD: Loading database from 'C:\Users\HP ELITEDESK\.kdx\data\kaspad-kd0\kaspa-mainnet\datadir2' and red blinking at about 30 seconds. Can you help?
Thank you for this guide. Having issues getting my node staying up but will rewatch this until I get it right.
It might just be internet connection
Good job buddy! Very informative for those of use who need a little guidance.
Never mind the last comment it just suddenly opened up for me. Thank you for the tutorial.
thanks for the info.. You did such a good job with this tutorial.. much appreciated.. im up and running kaspa node just waiting for kso
Solo mining is the way forward, you are furthering the decentralisation
Can you post how to connect solo mining node. With kS0 perhaps?
0
is it worth getting the kso? if you can just mine on the node what is the point? is kso more powerful or something>?!
Excellent guide, you got a sub👍🏾
appreciate it
Thanks alot for the video! Very well explained!
its very help full thank you so much
Thanks my server is up and running
Nice brother re-watching man good stuff
2 questions...1. is running the node requiring same mining resources or is it different than mining? 2. how much resources (costs/day) does running a node use up on the PC? Again i thought nodes didn't require as much energy as say gpu/cpu mining.
i think it would depend on hardware for the node running cost. normally youll pull about 50w for the motherboard and then you can check how much load your cpu is under and then check the power draw of the cpu and factor that percentage. for example say your cpu is under 50% load then you can roughly calculate that your cpu power draw is 50% of the max it can draw. so you add the power draw from the motherboard and then the cpu load and that how much it cost tpo run per day. thats only for the node
@@SterlingSpecter1 ok. But do running nodes draw the same energy consumption as cpu/gpu mining? Also isn’t Kaspa only asic mining now? If so will noding still work too? Trying to differentiate between nodes and miners.
@@wadevid node can be run seperate to miners, but yes your PC will have to draw extra power if you run a miner and a node on the same PC. Also kaspa will remain gpu minable but the ASIC's are reducing the profits
Guess the main question is do i need to run the bridge on every rig i plan to connect to node?
If you allow someone else to mind to your node though how would their rewards get distributed you would have to do that for them correct
I’m having a problem opening up the Casper bridge file it is not opening up. It just goes blank after you click on the run. Anyway on the windows protection PC and it’s been added to my windows. Defender Exclusion list.
How technical is it to run a node? Very interested But if it is super technical I won't be able to pull it off
It’s very easy with kaspa, if you need any help hit me up on discord - sterlingspecter
Other than no pool fee, what is the benefit of mining this way? What are the disadvantages?
advantage is that you have basically zero ping to the node, and this helps you get blocks on the network because it will favour the best connection. the disadvantage is the luck on the network solo
the benefit of mining to your own node is that your decentralizing the network.. disadvantages are that you need alot of hashrate and a fast connection speed to compete with other miners ... there is a reason why alot of pools are always hitting blocks .. its because they are peer connected to fast nodes that can push it on the network before anyone else .. addpeer in the kdx settings of whoever got the highest block when you restarts your miner .. you can find peer address in the kaspad while you sync
Possible to ask if I'm mining Abt 5 thousand kas with Asics, is it better to mine solo or pool? My experience is pool charge higher commission than they stated. Thanks all for your input
@@zmthaha go solo on your own node
@@SterlingSpecter1 thanks for taking the time. Much appreciated. But like is it a bit of gambling if solo?
this is crazy so there is no reward for running a node? what is the incentive?
Very cool!
Node is running and lolminer shows work being done but bridge screen won’t stay up
HI thanks for the infos ! i have setup everething stratum runing node , but lol miner for kas is not runing it pops : No cuda driver or GPU detected . Do i need to instal a Nvidia GPU? in order to start mining? i m wondering if i can mine kas with CPU only ?
What is the best mining node
My bridge fails to connect to my node. I followed all the instructions and the mode is running? Any suggestions?
bridge is probably failing because of the IP. it has to connect outwards. add me on discord @sterlingspecter and ill try help you out
Is this going to be different now since they're using rust?
When I try to mine to the node I set up from a different rig it shows time out lost connection not reachable..need some help tried running the bridge on the other rigs but it just go away immediately after opening.
if i have a iceriver ks0. can i connect that to my solo node ?
Yes but there is a different bridge to use
ks bridge v1.2.0 is the bridge you need to use iceriver and in the config yaml file you can leave min share diff as default which is the min share diff for a ks3 .. or change it to 80 .. it really don't matter as long as your var_diff setting is set to true
So i have done everything but thr bridge shows lost connection to stratum server
'Kaspa is not synced, waiting for sync before starting bridge ' how long is it takes? I run it nearly 12hrs now and still can't run the bridge because it not synched. Btw thanks for the video, very informative :)
Why when l click to run bridge and I hit enter to run it the bridge screen disappears
i follow all u say but at the step of lolminer i cant find the files (mine kaspa) i saw ur version is from 1 years ago so i guess it is under a othername now or i dont know can u help me about that
when i go to lolminer and open that lastest one kas doent show i tried opening all but kas is not their...
if we chose : cpu miner , we will get kas reward ? it wil mine in solo mode ?
i dont see the mine_kas in the lol miner
Lolminer says no user account or wallet to mine on config. Followed every step. Does kaspad need the miner feature enable instead of just the plain node?
Hi thanks for the video, very straight to the point :). I have a question about Ipv4 selection can i select a wireless lan and use this connection type or does it need to be through ethernet ? Thanks
in theory it would work, but your network connection would be slow which means you should submit a lot of invalid shares when mining
if i go cpu mining.so it will mine kaspa instead of danloading rest off rubish.thx
What is required to operate a node?
4 cores, 8gb of ram 100gb ssd
i keep getting 'lost connection to stratum server trying to reconnect' on lolminer and cant seem to figure out the error. followed all the steps. also did it on your version 1.76 and the latest 1.77b
does your issue resolved?
after i run mine_kas. the notification shows lost connection to stratum server. how to fix it? need help. and also i did follow the video step by step
thanks bro🎉 however, there is one error but I can’t fix it, can it help? I will be very grateful
Sir lolominer is not show kas miner? What Can i do now
Hello. launched the node, the GPU is working, the ASIC is not working (reboots). what is the problem?
how to connect asics to it?
the pc says the lolminer has a virus. It is not letting me download it. What can I do?
Hi there. Great video. I am having an issue though. I did everything I should, or so I think, but I keep getting a message saying "Lost connection to stratum server (IP address here) or server not reachable" Any help would be greatly appreciated. Thanks.
make sure to run the stratum alongside the node at all times. if that isnt the problem there could be an issue with your internet provider for your ip, you cant use a vpn because it would not connect to the same IP. dont use wifi, have ethernet. i cant properly solve the problem but make sure you arent doing any of the above listed but if that doesnt work, uninstall everything and re-do the setup
How can I add my asic to the node ...?
can you post here the mine_kas notepad document so I can connect to the node
Hi guys, when I run the "mine_kas" file after editing, I get a message saying "all devices deselected or failed compatibility check. I am running i7-6700hq @2.60GHz 16GB RAM geforce gtx 960m. Any suggestions? Thanks!
How much Kaspa do you need to hold to make a node ?
zero, free to setup
Node running = no rewards
(that means we have to mine kaspa using cpu) 😂
Is this still viable? I’m running a 2080 TI with a good network. I see in different places profitables and others not, so really not sure!
I followed your video and I keep receive an error:All devices deselected or failed compatiblity check. Closing lolMinerPress any key to continue. I have windows 11, is thats the problem ?
No - i have Sync issues right from the sratch after installing it....
what about for mac book pro
May I ask if the ice river can be connected in this way?
the same node setup but i think the bridge is different for asic's
whats the difference of Archieved and Kaspa node?
normal node delets data, other one keeps all of it
How to run Rusty node?
Would it matter if the computer is connected via Ethernet because mine is on Wi-Fi and it's been at least 4 hrs and the Dag Sync still shows WAITING.
etherenet is better but wifi will work
Sterling, can I run this off of my wireless laptop CPU?
Should be able to but the connection to sever would be bad for mining
How long it takes to synchronize to current date. Now its showing as 25/07/2023
Should only take an hour if you are on the snapshot, if your downloading the full node it could take a while
@@SterlingSpecter1 now the error msg from bridge is kaspa not synchronized completely.
@@infotec1839 sorry for the late reply but it might depend on what you are mining with, the brige is setup for gpu mining and not asic mining. there is a different bridge for asic
can i use the kaspa-stratum-bridge for goldshell kabox asic miner ?
i think you can but this video is slighlty outdated now
Great video! the bridge connects and i can see it connecting in kdx but it disconnects and the cmd window closes immediately
im working on a new video, because this one is outdated because of ASIC's, ill address problems in that video
Thank you! I am also running this through 8 core vps. I am using it for work and besides when i am working its always on. What is the difference for how much you can min based on setting up a machine with a dedicated amd or nvidia gpu or just running on a 8 core vpw? I unded up just runing unminable for now as bz miner/ lol miner needed a gpu but was just curious if i should look to build a machine to mine kaspa and take it off the work vps and iff it would be worth it @@SterlingSpecter1
great video but i got a problem might starts then says removing me then thats it got any ideas lol.
Could be due to vpn or the bridge isn’t set up properly
And how long till I start to see Kaspa in my wallet
The Lolminer kasmine batch file is not in the folder???
the windows64 folder
its because you cant mine on GPU's anymore
this links not working
Hi, I wonder if you can assist. I have followed the instructions, bridge works great and i can see it connecting the Kas Pad. moving on i have downloaded the latest "lolMiner_v1.77b_Win64.zip" and made the changes to the file "mine_kas_with_oc" only version available. once changes where saved, i proceeded to run the aforementioned and LolMiner 1.77 appears on the screen as well as a few lines of data and not much else beyond that point. Upon checking back to the bridge i see my worker name but nothing in the avg Hashrate etc etc. Please can you advise what you thing i may have done incorrect. Many thanks
I have never encountered that problem, normally the miner doesn’t even work but yours seems to connect. If it’s connected then it should run fine but it could also be a problem with the batch file like you are running too high on overclocks or that you haven’t ran lol miner as an administrator
Hi @@SterlingSpecter1, I even tried the same older version 1.76 as that has an option of Kas without OC and the results are the same. Likewise, i have never ran LOL miner in my life before yesterday, in fact, never mined until i downloaded unmineable which works ok. I wanted to give the solo a try in case the results where better. My Pc has a AMD CPU and 4070 GPU, not the best of course but far from the worst.
so no rewards for running the
Kasp Node
no sorry
how big if we download the whole block chain ? many gig ?
i actually dont know, it cant be more than 250gb
@@SterlingSpecter1 and how much kas do you make per day letting the node run ?
@@christianpiche3238 you dont earn rewards for running kaspa node, sorry
under kaspa node there is cpu ming , gpu mining , self contain mining are those option working ? anyway i did the solo mining with lol miner just like you explain and it work fine , praying to get a block !!!@@SterlingSpecter1
How to check your earnings live?
I think you would have to check the wallet address
Is it an ussue that my ISP does a mandatory break of the internet connection every 24 hours?
yes
@@SterlingSpecter1 I like to think all the UK ISPs I ever knew did that as well?
@@Baerchenization they do still i think
@@SterlingSpecter1 So it happens to you as well, yet you can run the node, or you have a special line that never disconnects?
@@Baerchenization normally not, but i also have internet setup for mining
is this more profitable than using say LOL miner?
No, miner fee is still there
It's not working on my pc. First off all not synchronized, after two hours still on 2023-07-25.
Bridge getting exit.
And mine.kas not connecting to stratum ipadress:5555
Kindly help
Please tell me what hardware you are using to run the node?
@@SterlingSpecter1 Intel core i3 8th Gen. Laptop
8GB RAM, WINDOS 10
Any reply
@@infotec1839i dont think you can min e on that laptopo unless you have an external gpu pluged in, also your hardware might not be enought to run a node
Then kindly inform me mining by deploying a remote server for monthly rent.
Can i mine kaspa with my new mac. laptop and how many token can someone get in a day? thanks
cant mine on mac's sorry
How many can I mine a day using node
depends on the hashrate of your gpu's@@zinakaja4739
Hi, please help me. I've been trying for days to get this node syncing to the bridge but fail. I have CPU and I want to direct mine this but everything is gpu mining. The command file is my problem even when I tried ramdonX xmrig still it dont work. Please can you do a video on how to direct CPU mining a Kaspa Node, thank you?
Can i mine in ks1 ?
Yes
My brain is fryed. How do people get to know all these information 😅. I might be the dumbest guy here
does kaspas node payout kaspa ?
no
my kaspa node have network issues, it continue to crash also with bzminer. How i could avoid this problem?
need to update node to latest patch
the guy says that mining kaspa in gpu is obsolete
run node free?
yesssss
wtf did I just watched??? 😊😊😅😅😅
Hi Guys... all good in the hood... I cannot find mine.kas file in the lol miner... which lolminer is suitable wit mac os?
Hi thanks for the tutorial. However I followed all the steps but when I click mine_kas.bat after saving it. it says lost connection to stratum server, how to fix this?
Thanks in advance
Are you running the node constantly if not it’s something to do with your bridge file
Great video! Question: on the video you used lolMiner 1.76a, right now they have the 1.77b but the mine_kas.bat is not there… I used the one you used on video, this auto update? Or Which one i can used on the new version? My second question is what kind the maintenance i need to do with this node?
you find a solution to this, because I'm having the same issue.
I am having problems with my windows 10 and , I get this info KASPAD: Adding uacomment=kdx_2.12.9 to arguments
UPNP: ENABLED. Set "upnpEnabled": false in Settings -> Advanced -> Service Configuration to disable
UPNP: Could not get public IP: Connection timed out while searching for the gateway.
2023-12-19 11:45:35.703 [INF] KASD: Version 0.12.15
2023-12-19 11:45:35.703 [INF] KASD: Profile server listening on :7000
2023-12-19 11:45:35.703 [INF] KASD: Loading database from 'C:\Users\HP ELITEDESK\.kdx\data\kaspad-kd0\kaspa-mainnet\datadir2' and red blinking at about 30 seconds. Can you help?
ip config is wrong, try change it
How do I do this, and what do I put in there.@@SterlingSpecter1
I have setup the node successfully. I want to mine with cpu, how can i use xmrig. I tried but it says invalid address. Kindly help
Will there be any rewards running only the node?
no sorry