Great video guys! 60mph is cooking for those hulls. Most people don't realize that it cost $$$$ to go over 55mph on most watercraft. Love seeing these machine all cleaned up and purdy!
It’s funny because everyone who owns and rides X4 type seadoo’s rides them the same way you guys do! ( Including me!) it’s great to watch you guys enjoy the fruits of your labor. Good job guys!
That’s awesome. I love the gps on the phone app. Because it shuts up the nay sayers !! Well you always have at least one guy still say something stupid about gps. Great video. I am a Polaris guy. But I have always loved those little 800 doo’s
I love the silver jet ski! Looks great w black seat. Where did you get the black strip on the ski all around? Also the handlebar where? It’s looks like BMX handlebar. So cool!!
I got three words for you - Letter rip taterchip!!! Man that Rossier ski is is so slick to me which all y’all’s stuff is fresh as hell but the rossier is probably my favorite so far. When we gonna see some stand up builds?
I just found this channel and seeing the level of work you guys are doing just brings a huge smile to my face! I had purchased a new 96 XP800 and it was with me till 2010 and how do I miss that ski. I'm interested in knowing what you guys at Today We Wrench would charge for a redo of these xp, just a ballpark figure? Now I'm searching for used XPs LOL!!
Typically you can get an x4 on a trailer for around 2k in good running condition, I payed $1,500 for my 96 SPX on a trailer needing nothing. It had a New wear ring, pump was rebuilt, fuel lines and selector were replaced, oil and gas tanks replaced, and 2 of 3 gages working. After 2 yrs of ocean running and jumping waves, my engine was mis-aligned and killed the drive shaft splines on the prop side, along with the splines on the prop. So I replaced the prop and drive shaft, did carbon seal, aligned the engine, and put an OEM MPEM in it after seeing the one I had was chinesium. She does 54mph with my 145lb frame on it, and 5 gals in the tank. Love it
That machine flys man great Have a cuestión. I have a 96 seadoo Gti and some times wile on the trailer can’t shot off the ski with the botón or pulling out the land yard even if I unplowed the spark plugs and still running for a little wiled. Did you have an idea what’s going on? Thanks in advanced
Man, think you could do a video on setting up 44mm carbs for 787 and jetting for a rossier pipe? You make some good videos. I don’t have the patience to video when wrenching.
Great video guys! 60mph is cooking for those hulls. Most people don't realize that it cost $$$$ to go over 55mph on most watercraft. Love seeing these machine all cleaned up and purdy!
Thanks! No doubt it tanks some money and alot of wrench time/testing to get speed out of these. Thanks for watching
It’s funny because everyone who owns and rides X4 type seadoo’s rides them the same way you guys do! ( Including me!) it’s great to watch you guys enjoy the fruits of your labor. Good job guys!
Thank you for the support!
You guys are awesome! Especially considering your ski's speeds are faster than many brand new skis costing 10K-12K+ Keep up the great work :)
Thank you 🙏🏻
My 96 xp I rebuilt a few years back is still more fun than my 2012 RXP. Really miss that ski
So much fun to throw around and jump waves on. Love my 96 spx
That’s awesome. I love the gps on the phone app. Because it shuts up the nay sayers !! Well you always have at least one guy still say something stupid about gps. Great video. I am a Polaris guy. But I have always loved those little 800 doo’s
No faking it or questioning it now
Looks nice out there was cold here last weekend but made it out for last time this year both skis look great 👍🏻 nice job boys
Wasn't too cold and the water was perfect
As always good job like the superman 🦸♂️ at the end 👍
Gotta get down for aero purposes
Picking up a 97xp for 100 bucks next week!
Just got one too man🤘🏽🤘🏽🤘🏽💎
@@StILlGetTiNGUsEd2ThiSPlaCE Picked up a 95 XP 787X for $300 USD ..... Lottery find seller had no clue what he had ....
What are the benefits of the gsxl steering nozzle over a stock nozzle?
Larger bore diameter
I love the silver jet ski! Looks great w black seat. Where did you get the black strip on the ski all around? Also the handlebar where? It’s looks like BMX handlebar. So cool!!
Where you get the handler bar? Those are sick!
Id like your opinion on the big hub 140 mm pump mod on the xp.
Nice option, known as the "poor mans mag pump" They are a bit of work to get right when talking about the impeller though.
I got three words for you - Letter rip taterchip!!!
Man that Rossier ski is is so slick to me which all y’all’s stuff is fresh as hell but the rossier is probably my favorite so far. When we gonna see some stand up builds?
Yehhhhh Hawwwww bitches! I say that let her rip tater chip all the time lol
So, the hull is stock… 60mph in an old XP is crazy fast. Also you know a 951 would fit in that bad larry right?
Yeah but its pretty unreliable
Hell yeah
What is the best mix of fuel and oil?
On the xp800, where are the side vents? Cover the holes with floor mat?
Yes we did it in one of our videos
@@TodayWeWrench I will Have to go back and find it
I just found this channel and seeing the level of work you guys are doing just brings a huge smile to my face! I had purchased a new 96 XP800 and it was with me till 2010 and how do I miss that ski. I'm interested in knowing what you guys at Today We Wrench would charge for a redo of these xp, just a ballpark figure? Now I'm searching for used XPs LOL!!
Sold mine last year after 10 faithful years and god did I make I mistake I’m already looking for another one
Typically you can get an x4 on a trailer for around 2k in good running condition, I payed $1,500 for my 96 SPX on a trailer needing nothing. It had a New wear ring, pump was rebuilt, fuel lines and selector were replaced, oil and gas tanks replaced, and 2 of 3 gages working. After 2 yrs of ocean running and jumping waves, my engine was mis-aligned and killed the drive shaft splines on the prop side, along with the splines on the prop. So I replaced the prop and drive shaft, did carbon seal, aligned the engine, and put an OEM MPEM in it after seeing the one I had was chinesium. She does 54mph with my 145lb frame on it, and 5 gals in the tank. Love it
How did the rub rails hold up? I’m thinking of stealing that look!
Your XP's look and run great. Can you please tell me the material or company that makes the bumper guard around the edge of those skis. Thank you.
*rub rail
What Impeller are you running on that ski? And stock venturi noz/gsxl 88? Is that 88 to 88?
Where yall getting your pipes for them
Jarman’s secret stash 🤫
That machine flys man great
Have a cuestión. I have a 96 seadoo Gti and some times wile on the trailer can’t shot off the ski with the botón or pulling out the land yard even if I unplowed the spark plugs and still running for a little wiled. Did you have an idea what’s going on? Thanks in advanced
Could be mpem or kill switch. Got check out your wires and see where the path isn't closing.
What umi steering fits a 96 xp? I can't find anything
You can't find anything because we're 28 years past 1996. Ebay will probably be your best option.
is that wilmington river?
Yes. Kankakee river in Wilmington!
Real shit about the iPhones!🤣🤣🤣
Is this done on a river or a lake
River
@@TodayWeWrench take it to a lake and run it with no current
@@iputter6782 Look at the outlet were in my guy. Its not a current on the speed run nor is it flowing. Watch the water when were standing at the shore
Man, think you could do a video on setting up 44mm carbs for 787 and jetting for a rossier pipe? You make some good videos. I don’t have the patience to video when wrenching.
whatd you end up doing?
Thats a hard one due to the many different types of 44's and the way they deliver fuel