What was the point of going narrow on the rear arms? Seems like a lot of extra cost and work for what benefits?? Other than being able to run a monster offset wheel..
It’s actually not to run a bigger wheel offset but rather to narrow rear track width which will make the front end more stable. Couldn’t really go much wider on the front so narrowed rear. Fits the newest body much better too. Looked like we skipped leg day on the OG shell.
Haha Yes, because I've waiting for some more info for my redcat. I did the high battery mount and the car drive like a dream for me. So im looking forward to the new episodes.
Fledge is more high end power control, agile is down low power control with great midrange. Fledge also has option for internal fan to keep the motor cool. Xarvis is the baseline esc Rad is midline where you get a little more amperage then the standard Xarvis plus the torque settings and reverse polarity protection like the XX. Xarvis XX is top tier most power rated plus the reverse polarity and an extra fan port to drive the fledge internal fan (if used)
Can’t wait for the next video🔥
Stunning bro
Thank you!
Fanned Fledge!!!!
What was the point of going narrow on the rear arms? Seems like a lot of extra cost and work for what benefits?? Other than being able to run a monster offset wheel..
It’s actually not to run a bigger wheel offset but rather to narrow rear track width which will make the front end more stable. Couldn’t really go much wider on the front so narrowed rear. Fits the newest body much better too. Looked like we skipped leg day on the OG shell.
@@ScaleScience lol awesome can’t wait for the next video!
Agile 10.5 with lv42 rotor
Did you guys give up on the redcat?
Hell no!!! Nearly done with 3 new episodes hoping to drop the first of them tomorrow!
Haha Yes, because I've waiting for some more info for my redcat. I did the high battery mount and the car drive like a dream for me. So im looking forward to the new episodes.
thanks for watching! The new episodes are a new direction since fast factory disappeared but we had the budget minded people in our thoughts haha.
What is the difference between the agile and fledge acuvance motors?
as well as the escs?
Fledge is more high end power control, agile is down low power control with great midrange. Fledge also has option for internal fan to keep the motor cool.
Xarvis is the baseline esc
Rad is midline where you get a little more amperage then the standard Xarvis plus the torque settings and reverse polarity protection like the XX.
Xarvis XX is top tier most power rated plus the reverse polarity and an extra fan port to drive the fledge internal fan (if used)
Cool, do acuvance motors work well with non acuvance esc’s? Thinking of pairing a fledge with an xr10 pro g2. TIA
@@Jorge-ze9to rhe fledge seems power hungry so make sure you have a good cap on the G2
@@ScaleScience Could I use an acuvance blaze capacitor?
What camera is that?
Multiple cameras were used. Which camera are you referring to?
On board shots are from an insta360go2 and the bench top shots are from a Sony zv1
@@ScaleScience sorry, on board. Thank you
voice is getting quieter and quieter with every video in this series
Who wants to listen to me anyways?! Ha just kidding, thanks for letting me know.