Gentlemen...I am a retired Service Director from Cadillac.....I did extensive armature drag racing Mopar Hemi engines in B/ MP in the 70's....Enough about me............I "bumped" into this six cylinder build and I am ASTOUNDED at what you can get out of a small cubic inch motor like this. Any enthusiast can see this was a "no holds barred money motor.".............. I LOVED the cam sensor idea. Thank you !! You have a new fan here in New Jersey ! God bless !
Powernation made a Ford 300 six and put a turbo on it and it made over 500 horsepower with just one turbo. Go check it out on there channel it's a white painted motor with turbo
How fun would that be, to have the money, resources and time to be able to fabricate and design one of a kind parts to modernize a classic engine, with new technology. I can see why the guy still wants to come to work everyday!
This is hands down one of the coolest engine builds ever. Probably the most unique straight 6 I've ever seen. And I've seen a ton of BMW and Toyota builds haha
Even in the old days the right work made those six's evil. Heard a story once a guy showed up with one to a circle track full of V8's. They ended up wrecking the guy out cause he was fucking charging up to the front like a bat out of hell.
Keith is like the "Uncle" that everyone wants and needs! What a Gentleman and a Scholar! The man knows what he is doing and one can tell, he definitely has the talent and passion for it! It shows, in his works of art! Keep 'em comin' "Uncle Keith!" :)
I'm telling you man, stories about builds like these are why I LOVE this channel. You cover some seriously outrageous builds. I'd REALLY love to see a high horsepower Y-block build.
@@user-wu4fg7tc9y Why not? Have you seen the kind of horsepower these boys are building today? If the builder is worth his salt, reliability will be there ...how long? PM and you can have a lot of fun.
@@TheHorsepowerMonster If the ENGINE OIL PUMP belt breaks how fast do you need to shut off the engine to avoid locking it up due to oil starvation ? I would also like to know if you have done any engine rebuilds on the old INTERNATIONAL HARVESTER 304 & 345 or 392 engines in the IH Scouts ?
Holy Crap ! This guy is half Artist & Half Engineer. I raced Superbikes for a couple decades and know the difference between parts changers & True engine builders. This guy is engine builders engine builder.
Power nation did a similar build on an old ford six that was used as a power plant for a city weed abatement sprayer or some such. It came to them outputting like 80 HP. Left them putting out north of 500 HP.
Amazing machine! In 1959 (19 Y0), I rebuilt a 1949 straight-six with scored cylinders. It had to be bored out to .60 over to clean up the scoring. This wasn't a performance build, just to put a better engine in a '46 Chevy PU. As I recall, it had splash oil pickups on the rod bearings; I installed them correctly the first time. It was too tight to starter-crank and I had to hand-crank it for several minutes to get it to run. Fortunately, the oil flow was sufficient to keep it from seizing. It was a blast finding the parts and a wonder it ran the first time.
Now this is an amazing build. A lot of ground breaking tech compared to back then, and on a motor that parts aren't ever so readily available or existent, this really stands out to me.
You can get these at any junkyard for pennies. Now doing what they did to it did not cost pennies. I have seen cheap builds getting a reliable 350-400hp with cheap piston, and internal upgrades, and a large diesel turbo. I think most of the builds were about 2200 dollars. I would like to do an inline 6 build for industrial machines I have, but I live somewhere the roads are a sheet of ice half the year so we don't really do hotrods. I am more into 2 cycle stuff where we are just making toys, and we all drive electric cars. Small engines are easy to tinker with, cheap, and just as fun. This was an incredible build with tight tolerances. My first inline 6 I got for 150 bucks. I changed the Head gasket at 15yo, and did upgrades, and it fired up the first crank. The build they did could easily do 700hp if you push it. I like their build philosophy at keeping it at 4600RPM- makes that build bulletproof. That thing will make reliable HP for as long as you can still get fuel for it.
@@bigredc222 Precisely!!! They were designed to get things moving and not intended for rpm. The rotating mass of the the crankshaft and it's length are a testament to that! Beautiful build and master craftsman.
@@bigredc222 , We built a Chevy 292 inline 6 a bunch of years back, we used 302 chevy pistons in it, once we got it warmed up when it idled it sounded like a two stroke engine, lol, we had a lot of fun in our free time at the machine shop.
Keith has probably forgotten more than most know!! The "this is what separates a true builder from an assembler" reference is right on point!! Awesome video thanks bud 🤙🤘🔥
Any time you get Holley to pay you to design a sbc intake, and the. Pay you a licensing fee for each unit sold.. you know a lil something about something! 😉
Most of technology he used didn’t exist when he started building engines. I see a man who has learned continuously throughout his career. I like it when guys don’t get set in their ways to the point of getting passed over by the times we live in.
The best part of watching this is that Keith is so freaking HUMBLE. He's obviously not difficult to work with and eager to keep challenging himself as well. Would hire him in a nanosecond.
You couldn't be more right on your comment. I've assembled some engines in my lifetime, but I am absolutely no engine builder. When I had my 709 wheel horsepower 1.8L B18C5 engine built for my Civic, I had it assembled by a well-known machine shop and engine builder. I paid them to balance, machine, and assemble the long block, and I assembled the head, turbo, and all of the other components so that I knew the hard part was done properly.
It's wonderful to see engine masters work on 'one-off' designs. It demonstrates a level of skill and ingenuity that you just don't see with current engines and hoards of available, aftermarket parts.
this is by far 1 of the coolest and most beautiful engines builds I have seen in a long time. All of us engine builders and or engine enthusiasts have soo much to learn from these artist and if we don't get with builders and learn this lost art of designing, fabricating, and building engines like these artists engine builders will be gone and these techniques will be lost forever. us younger builders tend to only look at the future and the next fad coming, which I am guilty of as well but we forget where hot rodding came from and what it takes to truly call yourself an engine builder and not just another parts installer. Thank you very much for the video and please keep em coming.
This is by far the most incredible engine build I have seen. You always seem to get all the fine details in there, which makes the videos shine in my opinion.
@@TheHorsepowerMonster i have a wonderful for Keith Dorton could a carbonated engine be turned into a Fuel injection 💉 system with out the distributor hi 👋 from 🇨🇦 #YSW
There's no torque "Curve", that's a torque plateau. A Torque Hoodoo. Someone will ask you about the power band and the owner will just say YES. I wonder how good it'll be for towing, or even what mileage it'll get- that engine's gotta be super efficient now. Totally agree with Kieth about making odd one-off and custom stuff. Before electrics take over, we are giving gas the greatest send-off possible- The LS has made huge power a breeze, cheap machining tools are everywhere (both from classic American cast iron to slave-built Chinese stuff) and information and help is literally a forum away. Thanks so much for showing us all this cool stuff HM!
Bite your tongue...electric cars suck unless it's a hybrid. Two stroke supercharged diesels ARE STILL the most efficient power plants. Been working for the Electromotive since the 50s and they only carry a bare minimum of battery.👍 The EPA is in the back pocket of industry, we should be getting a minimum of 100mpg if the EPA were really doing it's job...Old tech and the new 👍
@@MrPaige222 I'm not a rotary guy so grain of salt, but rotaries have terrible problems making NOx and other oxides because they burn so hot- and oxides are what you get with a hot burn. The renesis had to avoid that with a unique air intake design that partially strangled them.
@@girthquake1413 I'm right there with you. I have little to no respect for that particular engine. I understand the tiny displacement in regards to the horsepower output, but it comes at such a huge cost in reliability and fuel economy. No thanks. It's no wonder an RX8 is practically worthless
Unbelievable! That torque coming on right off the get go and not really having to spin it up much would be a lot of fun on the street. I built a 4.0 liter for a 66 rambler that was nothing close but made good power considering it was never meant to make much power. Nice work and I would love to just be in the shop with this guy to learn from the greats. Not many left and getting fewer every year.
I could listen to Keith talk about engine building all day. What an absolute legend! I'll die a happy man if I even get close to the skill that man has in his little finger.
Wow , that's incredible , just gobsmacked by the absolute perfection and creative genius of this builder. My goodness, that's well worthy of a Sema or on display with Jay Leno's on permanent displayed front and center . Please make sure to follow-up on this masterpiece
10psi and 600lb/ft of torque?! Can we just take a moment to appreciate that a 1950s block and crank with a performance head designed in the same era is making what even LS guys dream about nowadays? The amount of little details to squeeze all that thump out of this lump is truly mind boggling.
Thanks for the awesome video. I love the Chevy inline 6. I'm building a 292 with 6-71 blower, 2 Quick fuel 650 DP, Ryan Falconer V-12 head (aluminum crossflow 340I 220E), Crower billet crank, cam and rods, girdled and doweled mains, 5 stage dry sump and Electromotive direct fire coil over ignition. Going to keep it down to 1000 HP. It's going in my 53 Chevy 1/2 ton pickup with a Tremec 5 speed. I have electric P/S and an electric A/C compressor. I'm looking for 8.50 in the 1320. It's nice to see I'm not alone in my madness. I know 3 other guys running a little north of 1000 HP in their 292's, 2 with turbos and 1 with a blower. Thank you for your time.
@@billallen4793 hell yeah Bill I'm a Wyoming native run with the neighbors run that way you know where to get parts... 70 mi into town to get parts or quarter mile over the hill to the ol heads tractor....
The torque from that beast is just awesome. Talk about a tire shredder. You are absolutely right in that this dude is an engine builder. Seeing a problem and solving it is what separates the true mechanics and engine builders from the parts changers.
I love the builds Keith does and this one is no different, my favorite was the V8 block turned into a V6 and he plugged the rear cylinder holes, he's the best engine builder too me but i may be biased since I live minutes from his shop.
This is the first time I've seen the man. I'm 62 years old, and I completely agree with you. Most people with his abilities are rather difficult to be around. I could hang out with him all day just to watch and listen
It really is an art! He had to make colors that didn't exist and still made a cohesive working canvas to paint on! Pure delight to see the finished art in capable hands!
Impressive! Thats a lot to ask for that old chevy, but like what was said, this is what separated the true builders from the assemblers. Coming from a background in this stuff, this is an excellent build. Genius!
I have been watching this channel for a while now. I don't know how many videos I have watched. I do know that this man working on this engine is a genius. Not all of these smart features does he thinks of, but I bet he thinks of most of them. This man should be put into an engine builders Hall of Fame.
Wow I had a 76 elco with the 250 cube straight 6 We ditched the carter for a high flow twin Weber, cut and welded and made a dually with 2x twin Webers (down drafts) and changed out stock cam for a “town and country” grind with solid instead of hydraulic lifters. We then fitted a custom made tube extractor manifolds and that few mods changed that Elco into a reasonable sleeper in 78. As students at the time it was a labour of love by my father and friends that we made a plan because there was no issue with money. Theres only an issue with money if you got some. We didnt have any. I was working 4 jobs to pay my tuition. So the Elco was an old sleeper in the true sense of the word. Scratch mods sounds about right cause we scratched around to do anything. And while the Elco was being worked on everytime, we resorted to mans ancient transport- boot 🥾 power... But it was a hoot Loved that car. Sold it with 325,000 miles on it and the motor had never been opened for repair work. Enjoyed this, wish i had 525 hp back then, not sure if there was anything that would have caught me(with the 3 speed stick shift) Keep on keeping on
What a great idea! The ingenuity in this build is at the top of the tree for quality and professionalism! Yet again you’ve put together a great video that never fails to impress anyone who watches it! Thanks again HPM!! Love it!!!
That's some serious old dude knowledge and some serious Ingenuity that has been lost to time more of us need to be able to learn to do these things if we're going to be able to keep our passions of driving things fast going. I appreciate the hell out of this video I love the story and I love to see what people are doing in the world thank you for putting it out there
Amazing. I had a hot rod engine specialist rebuild the 230 ci straight 6 in my 67 Chev pu, several years ago. In doing the rebuild he explained to me some of the problems, such as the combustion chamber in that old 230. He proposed some ideas for increasing performance, but, as with many people. At the time, expenses were a limiting factor. I wish I could have let him make some of the mods he proposed, but it was not to be. He might have come up with 250 HP out of that 230. That would have been fun. As it turned out, he provided me with a very competent running nearly stock engine, but it provided many years of running. My son "inherited" the pickup which did not outlast the engine. Last I heard he was pulling that engine for another application. I always thought a lot of the Chev straight six, but never imagined a 500 HP version. Cool video!! Wonderful imaginations, and amazing technical abilities. Thanks.
Great video that digs into some fascinating details about this amazing build. I just can't get over how clean the whole thing looks when it's put together.
This brings back so many great memories from when I worked at Precision Machine shop a bunch of years ago. We did some sneaky machine work on a 307 chevy and got it to pull 9.60s in the quarter mile in an Opel GT, we were running a 393 in the GT originally but during off times we built a few grenades, the 307 was one of 'em. That was back in the late 70s. I just wanted to share a little bit of my fun but it was nothing like this exotic inline 6. I really enjoyed your video and I want you to know I never took my eyes away from the monitor the full 27:53. Thanks for sharing, for what it's worth, I left a thumbs up, a sub, and a tap on the bell.
this is what separates this channel from any guy with a junky ls, that engine was made just because it can be done instead of just using a stroker sbc. Congratulations that engine is truly unique
Finally!!! Finally someone does a beautiful restoration on that old Suburban, and they get the wheels/tires right, instead of jacking the truck up even higher and putting on ridiculously big in diameter and ridiculously wide off-road tires with white lettering, like so many people can't resist. Nice job!!! :)
My dad and I ran into a guy that was in Modesto CA for graffiti night( this was in late 80s before the city ruined it) he had a bucket t roadster. But instead of the usual small block, it had a Mopar slant six. Had a decent cam and a set of dual fours. It was of course all motor. Which I prefer anyway.
I've always been partial to the Chevy flat 6. Would love to try one in a twin turbo variety. This straight 6 is insane. The main bearing trick scares me however. I'd never have the guts to do that.
To build what no one else has is pretty amazing. There is usually a good reason no one has done it before. It takes a great deal of skill just to take on a project of this size. But to be able to actually finish it took a who lot of confidence and determination. My hats off to everyone involved. Amazing work.
I am always drawn to one of a kind engine builds. Especially if they are typically unloved/unsupported in the aftermarket. The Ford 300 and GM Atlas engines immediately come to mind. Straight 6s always have a place in my heart.
Stovebolts are quite simply 1/4 by 20 UNC bolts. Virtually universally used by cast iron stove manufacturers back in the day.FWIW, what we now call UNC was an engineering standard adopted by the US Navy in the late 19th Century. Stovebolt Chevy engines use 1/4 by 20 fasteners as a default on valve cover and lifter covers and I believe the pan as well. Hardware store bolts can serve,but the GM bolts were better material than that.
My Dad - who was born in 1917 and grew up familiar with these 1927 < up engines - said that the fact that the flimsy cover for the oil pump itself was held on with these low strength, low precision machine screws was astonishing to mechanics used to engines having more precise and more expensive construction. What you have to realize is that only truck and racing car engines had pressure-lubed connecting rod journals back then. Typically a splasher hooked under one rod bolt swung down and splashed oil everywhere inside the engine and some found it's way through a hole or two holes in the side of the big end of the rod to lube the crankpin. If you ever work on one of the very old design Wisconsin THD or TJD upright twin cylinder industrial engines you will see a much shorter splasher formed as part of the con rod cap - with an oil feed hole right above it. The camshaft on those engines ran a simple vertical plunger-pump that picked up oil from the bottom of the pan and lifted it into small elevated troughs positioned so the short splashers could make contact with that oil. That vertical plunger pump just lifted oil a few inches - there was no pressure as such. It's bore was made half in the block and half was a piece of tin bent into a half-pipe with ears. Stove bolt machine screws were good enough to hold the tin cover/half-the-plunger-bore to the cast iron block. (Surprising experienced mechanics of the day. Hey Model T Fords used the oil splash off THE FLYWHEEL DIPPING IN THE BACK OF THE OIL PAN, and finding it's way by sheer chance into a FUNNEL AND PIECE OF COPPER TUBING to gravity - lube THE MAIN CRANKSHAFT BEARINGS. Compared to that - the Chevy Six was much more modern !
@@patrickshaw8595 been a while since I've been in one of these , but if I recall correctly the dipper was a funnel that caught oil and forced it into the crank oil galleries . If oil was cold then it was to thick to be forced into the galleries , if you over revved it then the oil in the pan didn't have time to flow into the channel created by the dipper and it ran dry
Exactly what I was thinking, only four mains plus that huge center double counter weight kind of bothered me but I guess at 5000 RPMs it won’t be too unhappy.
Amazing project and awesome to see some straight sixes getting some deserved loved. As much as here in Brasil we are quite used to see gen3 straight sixes being tuned to over 2000hp levels on stock blocks and heads it is simply amazing to see how this build manage to perfectly mix the old school look and modern tech would love to build something similar one day with a gen 3 especially with a crossflow head
Are you SERIOUS? 2, 000 horses out of a straight SIX? Please make a video. I'd LOVE to see that! Nothing much shocks me anymore, but THAT sure would. I'm sure I'm not alone in this. Definitely make a video.
@@MrPaige222 th-cam.com/video/miENduXJivI/w-d-xo.html 2200hp actually on stock blocks and heads with reinforcement plates And the current record is 7.155 at the 1/4 mile on a h pattern manual
@@Grumpy_CBG That is just plain UNBELIEVABLE. Thanks for the information. I can't wrap my head around the fact that a straight 6 250 cube STOCK block and heads that came from the factory putting out 170 horsies is capable of 2200 with just those modifications.
One bad ass build. Really nice to see so much custom work going into such a unique build. This is definitely engine building craftmanship at its finest. I used to have a 250 straight 6, really great engines, almost impossible to kill.
A true engine building genius. I wonder how many he has put together with that old torque wrench he uses. If that thing could talk, man the stories. Great video..
Respect to these gentlemen. Great engines that as the narrator stated, lack of aftermarket support, but these guys have outdone themselves. Greetings from Austria.
When I was in High school ...the 60s...I had a friend who had a 39 Chevy...with a built 6cyl. It started as a GMC truck engine and took 4yrs to build. He did everything to it that was known in those days...balanced, blue printed, ported/polished head, big cam...and probably more that I didn't know about. Then he put headers and three 2bl carbs to top it off. It was the baddest car around. It beat anything and everything that came along. It was awesome! So I love seeing build like this one.
That GMC 6 was probably either a 270 or a 302. Yes, INLINE GMC 302-6. These were popular with rodders in the 50s! A company called WAYNE even made a cross flow head for them!
Gentlemen...I am a retired Service Director from Cadillac.....I did extensive armature drag racing Mopar Hemi engines in B/ MP in the 70's....Enough about me............I "bumped" into this six cylinder build and I am ASTOUNDED at what you can get out of a small cubic inch motor like this. Any enthusiast can see this was a "no holds barred money motor.".............. I LOVED the cam sensor idea. Thank you !! You have a new fan here in New Jersey ! God bless !
It is impressive that this engine is putting out 588 ft pounds tq at 3700 rpm.
What kinda times did u turn in that Hemi in your B/MP class?
Powernation made a Ford 300 six and put a turbo on it and it made over 500 horsepower with just one turbo. Go check it out on there channel it's a white painted motor with turbo
@@bradleymadosh911
😂🎉😢😮😅@@bradleymadosh911
Keith is a true engine builder. Anyone can slap together parts and make them work. What he made is art.
Man you are absolutely right the man is a mastrr at what he does best and thats to create ,,my hat is off to him
I am amazed at his engine building skills and insight that he has.
How fun would that be, to have the money, resources and time to be able to fabricate and design one of a kind parts to modernize a classic engine, with new technology. I can see why the guy still wants to come to work everyday!
How tragically ironic that with age , it is time that becomes the more precious resource.
What a great opportunity to get the knowledge made available 🙏🏼
No doubt
@@jamessharp9790 So true !
These inlines are so awesome. It's a shame that so many one offs have to be made.
This is hands down one of the coolest engine builds ever. Probably the most unique straight 6 I've ever seen. And I've seen a ton of BMW and Toyota builds haha
That torque "curve" is unbelievably straight. Such fine workmanship by a master builder!
Even in the old days the right work made those six's evil. Heard a story once a guy showed up with one to a circle track full of V8's. They ended up wrecking the guy out cause he was fucking charging up to the front like a bat out of hell.
@@jr540123
The GMC 302" ruled back in the day; add a Wayne head and you were good to go....
I was thinking the exact same thing
That's a I-6 for ya'. Smooth as silk FAT torque, brought to you by Chevrolet.
@@rgroove1970 That thing is wild. I've never seen a car bounce the front tires down the whole stretch and not look scary as shit the whole way.
Keith is like the "Uncle" that everyone wants and needs! What a Gentleman and a Scholar! The man knows what he is doing and one can tell, he definitely has the talent and passion for it! It shows, in his works of art! Keep 'em comin' "Uncle Keith!" :)
I'm telling you man, stories about builds like these are why I LOVE this channel. You cover some seriously outrageous builds. I'd REALLY love to see a high horsepower Y-block build.
Thanks a lot!
fun? yes. reliable? 🤷
@@user-wu4fg7tc9y Why not? Have you seen the kind of horsepower these boys are building today? If the builder is worth his salt, reliability will be there ...how long? PM and you can have a lot of fun.
@@charlesangell_bulmtl well fair enough, but the more you fuck with an engine the less reliable overall right? talking every day drivers tho
@@TheHorsepowerMonster If the ENGINE OIL PUMP belt breaks how fast do you need to shut off the engine to avoid locking it up due to oil starvation ? I would also like to know if you have done any engine rebuilds on the old INTERNATIONAL HARVESTER 304 & 345 or 392 engines in the IH Scouts ?
Holy Crap !
This guy is half Artist & Half Engineer.
I raced Superbikes for a couple decades and know the difference between parts changers & True engine builders.
This guy is engine builders engine builder.
I just love straight 6 engines build ups. And this one is definitely my favorite. What an absolutely gem.
sorry but that sounds like Arse sure awesome expensive setup but my old junkyard pick a part $50 crossflow ford 4.2 made 600hp ate 8 year ago.
@@altruismfirst6489 You are full of shit are your eyes brown?
Power nation did a similar build on an old ford six that was used as a power plant for a city weed abatement sprayer or some such.
It came to them outputting like 80 HP. Left them putting out north of 500 HP.
Amazing machine! In 1959 (19 Y0), I rebuilt a 1949 straight-six with scored cylinders. It had to be bored out to .60 over to clean up the scoring. This wasn't a performance build, just to put a better engine in a '46 Chevy PU. As I recall, it had splash oil pickups on the rod bearings; I installed them correctly the first time. It was too tight to starter-crank and I had to hand-crank it for several minutes to get it to run. Fortunately, the oil flow was sufficient to keep it from seizing. It was a blast finding the parts and a wonder it ran the first time.
Now this is an amazing build. A lot of ground breaking tech compared to back then, and on a motor that parts aren't ever so readily available or existent, this really stands out to me.
You can get these at any junkyard for pennies. Now doing what they did to it did not cost pennies. I have seen cheap builds getting a reliable 350-400hp with cheap piston, and internal upgrades, and a large diesel turbo. I think most of the builds were about 2200 dollars. I would like to do an inline 6 build for industrial machines I have, but I live somewhere the roads are a sheet of ice half the year so we don't really do hotrods. I am more into 2 cycle stuff where we are just making toys, and we all drive electric cars. Small engines are easy to tinker with, cheap, and just as fun. This was an incredible build with tight tolerances. My first inline 6 I got for 150 bucks. I changed the Head gasket at 15yo, and did upgrades, and it fired up the first crank. The build they did could easily do 700hp if you push it. I like their build philosophy at keeping it at 4600RPM- makes that build bulletproof. That thing will make reliable HP for as long as you can still get fuel for it.
This isn't just an engine build.. this is an engineering master piece!
Man love that flat as a table torque curve, it’ll be interesting to see the finished rig once it’s completed. Super nice build guys.
@R K its not a v8 that are known to low end torque its a straight 6.
Straight sixes have always been known for having torque, that's why they worked good in work trucks.
@@bigredc222 Precisely!!! They were designed to get things moving and not intended for rpm. The rotating mass of the the crankshaft and it's length are a testament to that! Beautiful build and master craftsman.
@@bigredc222 ,
We built a Chevy 292 inline 6 a bunch of years back, we used 302 chevy pistons in it, once we got it warmed up when it idled it sounded like a two stroke engine, lol, we had a lot of fun in our free time at the machine shop.
OMG. Not really enough words to describe the uniqueness of this build, and of course the talent of the men at the shop !
Keith has probably forgotten more than most know!! The "this is what separates a true builder from an assembler" reference is right on point!! Awesome video thanks bud 🤙🤘🔥
Any time you get Holley to pay you to design a sbc intake, and the. Pay you a licensing fee for each unit sold.. you know a lil something about something! 😉
Most of technology he used didn’t exist when he started building engines. I see a man who has learned continuously throughout his career. I like it when guys don’t get set in their ways to the point of getting passed over by the times we live in.
The best part of watching this is that Keith is so freaking HUMBLE. He's obviously not difficult to work with and eager to keep challenging himself as well.
Would hire him in a nanosecond.
You couldn't be more right on your comment. I've assembled some engines in my lifetime, but I am absolutely no engine builder. When I had my 709 wheel horsepower 1.8L B18C5 engine built for my Civic, I had it assembled by a well-known machine shop and engine builder. I paid them to balance, machine, and assemble the long block, and I assembled the head, turbo, and all of the other components so that I knew the hard part was done properly.
I am beyond happy, that someone actually built one of these! :D
This is hands down the best engine channel on TH-cam.
That's a big compliment. Thanks a lot!
It's wonderful to see engine masters work on 'one-off' designs. It demonstrates a level of skill and ingenuity that you just don't see with current engines and hoards of available, aftermarket parts.
Man! You guys ARE engine builders. You've practically redesigned and fabricated 90% of the old straight 6. Awesome job.
this is by far 1 of the coolest and most beautiful engines builds I have seen in a long time. All of us engine builders and or engine enthusiasts have soo much to learn from these artist and if we don't get with builders and learn this lost art of designing, fabricating, and building engines like these artists engine builders will be gone and these techniques will be lost forever. us younger builders tend to only look at the future and the next fad coming, which I am guilty of as well but we forget where hot rodding came from and what it takes to truly call yourself an engine builder and not just another parts installer. Thank you very much for the video and please keep em coming.
I could only daydream about how cool it would be to learn from someone like that. Awesome.
Man the sound of turbos never gets old! What an amazing accomplishment they've pulled off, such an amazing build!
This is by far the most incredible engine build I have seen. You always seem to get all the fine details in there, which makes the videos shine in my opinion.
Hey, thanks a lot!
Very well said and well deserved comment. You did a fantastic job not only showcasing the engine, but Keith himself.
@@TheHorsepowerMonster i have a wonderful for Keith Dorton could a carbonated engine be turned into a Fuel injection 💉 system with out the distributor hi 👋 from 🇨🇦 #YSW
That truck will pull the same with or without a trailer. Masterpiece.
There's no torque "Curve", that's a torque plateau. A Torque Hoodoo. Someone will ask you about the power band and the owner will just say YES. I wonder how good it'll be for towing, or even what mileage it'll get- that engine's gotta be super efficient now.
Totally agree with Kieth about making odd one-off and custom stuff. Before electrics take over, we are giving gas the greatest send-off possible- The LS has made huge power a breeze, cheap machining tools are everywhere (both from classic American cast iron to slave-built Chinese stuff) and information and help is literally a forum away. Thanks so much for showing us all this cool stuff HM!
Bite your tongue...electric cars suck unless it's a hybrid. Two stroke supercharged diesels ARE STILL the most efficient power plants. Been working for the Electromotive since the 50s and they only carry a bare minimum of battery.👍 The EPA is in the back pocket of industry, we should be getting a minimum of 100mpg if the EPA were really doing it's job...Old tech and the new 👍
@@charlesangell_bulmtl okay boomer
But if they're so efficient, why are rx8s such gas hogs? Could ot have something to do with low torque?
@@MrPaige222 I'm not a rotary guy so grain of salt, but rotaries have terrible problems making NOx and other oxides because they burn so hot- and oxides are what you get with a hot burn. The renesis had to avoid that with a unique air intake design that partially strangled them.
@@girthquake1413
I'm right there with you. I have little to no respect for that particular engine. I understand the tiny displacement in regards to the horsepower output, but it comes at such a huge cost in reliability and fuel economy. No thanks. It's no wonder an RX8 is practically worthless
Unbelievable! That torque coming on right off the get go and not really having to spin it up much would be a lot of fun on the street. I built a 4.0 liter for a 66 rambler that was nothing close but made good power considering it was never meant to make much power. Nice work and I would love to just be in the shop with this guy to learn from the greats. Not many left and getting fewer every year.
I could listen to Keith talk about engine building all day. What an absolute legend! I'll die a happy man if I even get close to the skill that man has in his little finger.
This man has likely forgotten more then we are ever likely to know.
Wow , that's incredible , just gobsmacked by the absolute perfection and creative genius of this builder. My goodness, that's well worthy of a Sema or on display with Jay Leno's on permanent displayed front and center . Please make sure to follow-up on this masterpiece
That aluminum Wayne head, is a game changer for the straight 6...very nice set-up.
THAT IS A NICE PEACE OF ENGINE ART! WHAT A FINISH. LOST FOR WORDS. A beautiful Engine!!!!!!!!!!!!
10psi and 600lb/ft of torque?! Can we just take a moment to appreciate that a 1950s block and crank with a performance head designed in the same era is making what even LS guys dream about nowadays? The amount of little details to squeeze all that thump out of this lump is truly mind boggling.
Fascinated by straight six builds.
That engine is straight art work.
Thank you so much for sharing !
Cheers
Thanks for the awesome video. I love the Chevy inline 6. I'm building a 292 with 6-71 blower, 2 Quick fuel 650 DP, Ryan Falconer V-12 head (aluminum crossflow 340I 220E), Crower billet crank, cam and rods, girdled and doweled mains, 5 stage dry sump and Electromotive direct fire coil over ignition. Going to keep it down to 1000 HP. It's going in my 53 Chevy 1/2 ton pickup with a Tremec 5 speed. I have electric P/S and an electric A/C compressor. I'm looking for 8.50 in the 1320. It's nice to see I'm not alone in my madness. I know 3 other guys running a little north of 1000 HP in their 292's, 2 with turbos and 1 with a blower. Thank you for your time.
Sounds like a fun build! Thanks for watching
Good luck, I hope it works.
SWEET!...from Wyoming USA 🇺🇸 🤠
@@billallen4793 hell yeah Bill I'm a Wyoming native run with the neighbors run that way you know where to get parts... 70 mi into town to get parts or quarter mile over the hill to the ol heads tractor....
@@babydaddy1930 you still living here?
The torque from that beast is just awesome. Talk about a tire shredder. You are absolutely right in that this dude is an engine builder. Seeing a problem and solving it is what separates the true mechanics and engine builders from the parts changers.
I couldn't be more impressed if it went into outterspace. Just wow. Had to watch twice.
Idk about that, ask that dude from star trek. 😉
@@leinadalan He's as old as this engine design and both still boldly going!
Deep respect for the engineering of this project.
It probably has more preparation time than building time.
This is the best engine building channel on TH-cam.Without a doubt can't wait till the next video.
Wow! Thanks very much!
I started working as a mechanic and wound up doing it for 15 years. It can be kind of addictive.
Wow, way to go Keith! This engine is an absolute work of art with all of the custom pieces and your touches on it.
People with money sure do incredible things
What an awesome build! Such a great example of craftsmanship! Looking forward to the next one!
It's totally different and absolutely beautiful. Creativity second to none.
Nice job gentleman
I love the builds Keith does and this one is no different, my favorite was the V8 block turned into a V6 and he plugged the rear cylinder holes, he's the best engine builder too me but i may be biased since I live minutes from his shop.
This is the first time I've seen the man. I'm 62 years old, and I completely agree with you. Most people with his abilities are rather difficult to be around. I could hang out with him all day just to watch and listen
It really is an art! He had to make colors that didn't exist and still made a cohesive working canvas to paint on! Pure delight to see the finished art in capable hands!
Impressive! Thats a lot to ask for that old chevy, but like what was said, this is what separated the true builders from the assemblers. Coming from a background in this stuff, this is an excellent build. Genius!
I have been watching this channel for a while now. I don't know how many videos I have watched. I do know that this man working on this engine is a genius. Not all of these smart features does he thinks of, but I bet he thinks of most of them. This man should be put into an engine builders Hall of Fame.
This is what hot rodding is all about. Great vid
Thank you!
I really hope that air filter setup isn't permanent....
Truly the godfather of engine builds. Genius. Impeccable work. Pa, keep kicking ass. One love. MA-
Wow
I had a 76 elco with the 250 cube straight 6
We ditched the carter for a high flow twin Weber, cut and welded and made a dually with 2x twin Webers (down drafts) and changed out stock cam for a “town and country” grind with solid instead of hydraulic lifters. We then fitted a custom made tube extractor manifolds and that few mods changed that Elco into a reasonable sleeper in 78.
As students at the time it was a labour of love by my father and friends that we made a plan because there was no issue with money. Theres only an issue with money if you got some.
We didnt have any. I was working 4 jobs to pay my tuition.
So the Elco was an old sleeper in the true sense of the word. Scratch mods sounds about right cause we scratched around to do anything.
And while the Elco was being worked on everytime, we resorted to mans ancient transport- boot 🥾 power...
But it was a hoot
Loved that car. Sold it with 325,000 miles on it and the motor had never been opened for repair work.
Enjoyed this, wish i had 525 hp back then, not sure if there was anything that would have caught me(with the 3 speed stick shift)
Keep on keeping on
I simply cannot believe how beautiful this build is! This man is one smart cookie.
Awesome build! Makes me want to do an overhead cam Packard straight 8!
Incredible how nice it looks, it's a piece of art, and the sound is like music. What an awesome build!
That's awesome! Love the non mainstream custom builds!
This engine is beautiful. The use of updated technology on a very old engine usually makes an interesting combination.
Man I love seeing these oddball engines! I had no idea this existed
This is the kind of stuff I enjoy watching . Taking OLD engines , and really tricking them with new stuff . THANK YOU FOR THE VIDEO .
Wow the attention to detail. Even the accessories on the front look perfect.
What a great idea! The ingenuity in this build is at the top of the tree for quality and professionalism!
Yet again you’ve put together a great video that never fails to impress anyone who watches it!
Thanks again HPM!! Love it!!!
Awesome build! I love unique, off-the-wall engines like this👍👍👍
That's some incredible power for such humble beginnings from nearly 100 years ago.
That's some serious old dude knowledge and some serious Ingenuity that has been lost to time more of us need to be able to learn to do these things if we're going to be able to keep our passions of driving things fast going. I appreciate the hell out of this video I love the story and I love to see what people are doing in the world thank you for putting it out there
Sure he knows a lot of the past, and he did not get where he is without anticipating, adapting and embracing modernity and the future.
Amazing. I had a hot rod engine specialist rebuild the 230 ci straight 6 in my 67 Chev pu, several years ago. In doing the rebuild he explained to me some of the problems, such as the combustion chamber in that old 230. He proposed some ideas for increasing performance, but, as with many people. At the time, expenses were a limiting factor. I wish I could have let him make some of the mods he proposed, but it was not to be. He might have come up with 250 HP out of that 230. That would have been fun. As it turned out, he provided me with a very competent running nearly stock engine, but it provided many years of running. My son "inherited" the pickup which did not outlast the engine. Last I heard he was pulling that engine for another application. I always thought a lot of the Chev straight six, but never imagined a 500 HP version. Cool video!! Wonderful imaginations, and amazing technical abilities. Thanks.
I just love that old school sounds you are such an awesome inspiration to us all
Beautiful engineering to an ancient engine design to bring in into the 21st century - respect!
Great video that digs into some fascinating details about this amazing build. I just can't get over how clean the whole thing looks when it's put together.
This was a very impressive build. My absolute favorite so far.
thanks!
This brings back so many great memories from when I worked at Precision Machine shop a bunch of years ago. We did some sneaky machine work on a 307 chevy and got it to pull 9.60s in the quarter mile in an Opel GT, we were running a 393 in the GT originally but during off times we built a few grenades, the 307 was one of 'em. That was back in the late 70s. I just wanted to share a little bit of my fun but it was nothing like this exotic inline 6. I really enjoyed your video and I want you to know I never took my eyes away from the monitor the full 27:53. Thanks for sharing, for what it's worth, I left a thumbs up, a sub, and a tap on the bell.
this is what separates this channel from any guy with a junky ls, that engine was made just because it can be done instead of just using a stroker sbc. Congratulations that engine is truly unique
Finally!!! Finally someone does a beautiful restoration on that old Suburban, and they get the wheels/tires right, instead of jacking the truck up even higher and putting on ridiculously big in diameter and ridiculously wide off-road tires with white lettering, like so many people can't resist. Nice job!!! :)
Impressive, we need more true engineers like this!
That man is a certified genius! I cannot believe his abilities!
Amazing work!
I love these crazy straight 6 builds.
Did you see the 10 second slant sixes? If not you gotta see em
@@ericstiles9708 was that the jeep motor project on this channel a while back?
@@RhoadsChristopher no I was watching turbo slant 6. 67 barracuda 9.09 seconds, and others doing 10 and 11,s too. Crazy, super talented mechanics
@@RhoadsChristopher also try slant six supercharged 1971 Plymouth duster
@@ericstiles9708 thanks, I'll look them up!
My dad and I ran into a guy that was in Modesto CA for graffiti night( this was in late 80s before the city ruined it) he had a bucket t roadster. But instead of the usual small block, it had a Mopar slant six. Had a decent cam and a set of dual fours. It was of course all motor. Which I prefer anyway.
What a fascinating build story...enthralling to the end. Most enjoyable watch indeed 👌
Thank you very much, and thanks for watching!
I've always been partial to the Chevy flat 6. Would love to try one in a twin turbo variety. This straight 6 is insane. The main bearing trick scares me however. I'd never have the guts to do that.
Thats the most intense Stove Bolt I have ever seen.
Try see some brazilians 250ci 3gen
We make over 2500HP
This is a really cool build. Not just another LS. All the work arounds are genius.
The old 235 and 261 are very underated engines I have owned and built several they are a lot tougher than many think .
I appreciate the old engine, but an Atlas 4200 would look so sexy set up like this!
I wish I had 10% of this guys engine building knowledge
To build what no one else has is pretty amazing. There is usually a good reason no one has done it before. It takes a great deal of skill just to take on a project of this size. But to be able to actually finish it took a who lot of confidence and determination. My hats off to everyone involved. Amazing work.
Keith is world class brilliant,one of the best there is or ever was....
I am always drawn to one of a kind engine builds. Especially if they are typically unloved/unsupported in the aftermarket. The Ford 300 and GM Atlas engines immediately come to mind. Straight 6s always have a place in my heart.
Stovebolts are quite simply 1/4 by 20 UNC bolts. Virtually universally used by cast iron stove manufacturers back in the day.FWIW, what we now call UNC was an engineering standard adopted by the US Navy in the late 19th Century.
Stovebolt Chevy engines use 1/4 by 20 fasteners as a default on valve cover and lifter covers and I believe the pan as well. Hardware store bolts can serve,but the GM bolts were better material than that.
My Dad - who was born in 1917 and grew up familiar with these 1927 < up engines - said that the fact that the flimsy cover for the oil pump itself was held on with these low strength, low precision machine screws was astonishing to mechanics used to engines having more precise and more expensive construction.
What you have to realize is that only truck and racing car engines had pressure-lubed connecting rod journals back then. Typically a splasher hooked under one rod bolt swung down and splashed oil everywhere inside the engine and some found it's way through a hole or two holes in the side of the big end of the rod to lube the crankpin. If you ever work on one of the very old design Wisconsin THD or TJD upright twin cylinder industrial engines you will see a much shorter splasher formed as part of the con rod cap - with an oil feed hole right above it.
The camshaft on those engines ran a simple vertical plunger-pump that picked up oil from the bottom of the pan and lifted it into small elevated troughs positioned so the short splashers could make contact with that oil.
That vertical plunger pump just lifted oil a few inches - there was no pressure as such. It's bore was made half in the block and half was a piece of tin bent into a half-pipe with ears. Stove bolt machine screws were good enough to hold the tin cover/half-the-plunger-bore to the cast iron block. (Surprising experienced mechanics of the day.
Hey Model T Fords used the oil splash off THE FLYWHEEL DIPPING IN THE BACK OF THE OIL PAN, and finding it's way by sheer chance into a FUNNEL AND PIECE OF COPPER TUBING to gravity - lube THE MAIN CRANKSHAFT BEARINGS.
Compared to that - the Chevy Six was much more modern !
@@patrickshaw8595 been a while since I've been in one of these , but if I recall correctly the dipper was a funnel that caught oil and forced it into the crank oil galleries . If oil was cold then it was to thick to be forced into the galleries , if you over revved it then the oil in the pan didn't have time to flow into the channel created by the dipper and it ran dry
That's my favourite engine build on here.
Cool, thanks!
Very impressive, especially with just a 4 main crank. Later GM in-line 6s, and the Le Mans winning Jaguar XK engines all used 7 mains.
Exactly what I was thinking, only four mains plus that huge center double counter weight kind of bothered me but I guess at 5000 RPMs it won’t be too unhappy.
Ive never seen such incredible craftsmanship.
I wonder if anyone from the 50s that designed those engines would have thought it would someday be producing 500+ horsepower.
That was awesome! I've never seen a full custom build where new castings were invented to fit newer engineered parts to the build!
Keith has forgotten more about engines then most master mechanics ever learn.. what a legend
Magnificent effort, great to see what a bit of technology does to an old Chevy in-line six. Way to go, the smoothness of the engine is excellent
Amazing project and awesome to see some straight sixes getting some deserved loved. As much as here in Brasil we are quite used to see gen3 straight sixes being tuned to over 2000hp levels on stock blocks and heads it is simply amazing to see how this build manage to perfectly mix the old school look and modern tech would love to build something similar one day with a gen 3 especially with a crossflow head
Are you SERIOUS?
2, 000 horses out of a straight SIX?
Please make a video.
I'd LOVE to see that!
Nothing much shocks me anymore, but THAT sure would.
I'm sure I'm not alone in this.
Definitely make a video.
@@MrPaige222 th-cam.com/video/miENduXJivI/w-d-xo.html
2200hp actually on stock blocks and heads with reinforcement plates
And the current record is 7.155 at the 1/4 mile on a h pattern manual
@@MrPaige222 search the Aussie ford "Barra" i6 motors, they're getting over 2000 bhp outa those too.
@@Grumpy_CBG
That is just plain UNBELIEVABLE.
Thanks for the information.
I can't wrap my head around the fact that a straight 6 250 cube STOCK block and heads that came from the factory putting out 170 horsies is capable of 2200 with just those modifications.
One bad ass build. Really nice to see so much custom work going into such a unique build. This is definitely engine building craftmanship at its finest. I used to have a 250 straight 6, really great engines, almost impossible to kill.
One of the coolest builds yet!!!
Amazing work! Love that he said it's these kinds of builds that keeps him coming to work.
A true engine building genius. I wonder how many he has put together with that old torque wrench he uses. If that thing could talk, man the stories. Great video..
Respect to these gentlemen. Great engines that as the narrator stated, lack of aftermarket support, but these guys have outdone themselves. Greetings from Austria.
twin turbo itb stovebolt? holy crap!
When I was in High school ...the 60s...I had a friend who had a 39 Chevy...with a built 6cyl. It started as a GMC truck engine and took 4yrs to build. He did everything to it that was known in those days...balanced, blue printed, ported/polished head, big cam...and probably more that I didn't know about. Then he put headers and three 2bl carbs to top it off. It was the baddest car around. It beat anything and everything that came along. It was awesome! So I love seeing build like this one.
That GMC 6 was probably either a 270 or a 302. Yes, INLINE GMC 302-6. These were popular with rodders in the 50s! A company called WAYNE even made a cross flow head for them!
This Is a real engine build!