Tuning the low and high speed needle of your nitro engine . Kyosho mp9 tki4. Good and bad signs
ฝัง
- เผยแพร่เมื่อ 9 มี.ค. 2021
- Here is a video showing the signs of a good and bad setting of your nitro engine .
Old videos which I put as one . Skip to 2.44 for a look on the low speed needle .
Showing the settings for the high and low speed needle and how to correct them .
Subscribe for new content
#nitrorcbuggy
#nitrotunin
#kyosho
#mp9tki4 - บันเทิง
Best tutorial for high/low speed needles right here
Thank you . Glad it helped
The best video for me on tuning thus far!! Less talking, more explaining ppl
Most helpful video I’ve seen about nitro cars just trying to get in to it just bought one thank you for the tips
Awesome I’m glad it can help you . Any problems please contact me will be happy to help you .
Awesome video. Straight to the point. You Are The Man
this helped me diagnose lean low speed, best video, straight to the poiny
I’m glad it helped 🏎🏎💨💨
Best explanations I've seen, thank you!
Insanly easy and notimewasting video, well done!!
Thank you . That was my point sort and simple and explaining
Thank you for share , is Avery good guide to set my nitro buggy. 👍🏻
Best of the best.
Great theacher.👍
Very well explained,very good video.
It’s very good ! Nice bike !!! I like it - thanks you
Very good and helpful tutorial. Thanks.
No problem I’m glad it can be of some help
I think I can tune an engine now ...💪💪💪
I have same buggy huge help
Good job sir. Thank you
No problem I’m glad it can help you 🏎🏎🏎💨💨
This is just what i needed as I’m about to buy my first nitro
Awesome which one are you getting ?? Any problems please message me ,
@@dozyrcworld3847 I’m on a budget as I’m a cater for my wife so a hpi warhead
@@Rc.pipesmoker awesome good one to get into the hobby
THE BEST
Very understanding even though not a word was said
Hey you understood tho 😉😉
@@dozyrcworld3847 for sure best turning vid I've watched
Great video. Only one thing, why didn't you trouble shoot the idle?
hey any suggestions to fix idle issues? my one will idle for 30secs then die out?
What brand is a spark plug or its size Os P3 Or Spark plugs of Other sizes
my kyosho engine is totally oout of tune. how many turns from closed should each needle be to start properly tunning my engine. it is the ke21 rtr version
My nitro is bogging down when I’m on the gas could u help me
Only part that confused me was at the end where you said if you pinch the line and it takes longer to quit than either richen it up or lean it out but which needle were you talking about were you still concentrated on the low speed needle?
Yep pinch test is to do with the low speed needle 🚀🚀🏎🏎
@@dozyrcworld3847 great👊
Thank you! I got one MP9 tki3 with the KE21SP, without box and manual. How many turns from closed position, to achieve similar results of the video? Thanks alot!
no engine is the same as the other
you never touch those screws until you get to full temp
Good job it was up to temp . Heated it with engine heater before starting this vid .
What is a good engine temperature to run?
Hello sorry for the late reply I like to keep temps between 220-275F .
Thanks
No problem
@@dozyrcworld3847 really struggling to get my kyosho buggy in a good tune.. it barely idles for a few seconds then goes off ... and then when i have full trottle it sounds like it gurgles ill try fix it over the weekend
@@alteredstate7746 make sure the idle gap is around 1.5mm if it’s set to that then it has to be the LSN (low speed needle ) try to lean it out more .
@@dozyrcworld3847 much appreciated
Is the pinch test done on a warm or cold engine?
Warm
Thanks 🙏
What percent of fuel were you using?
Hello using 25%
Just subscribe and like best video
Hello
I don't want to be mean, but since I've been a 2-cycle engine mechanic for over 50 years, I can see that you don't know anything about it. You should remove your video people will seize their engines. I've never seen such a bad way to adjust a Nitro-powered carburetor. Sorry but it's the truth!!
Thanks for your comment much appreciated 👍🏻👍🏻