How to Replace Fuel Injector 1994-2004 Chevy S10

Buy Now!
New Fuel Injector Set from 1AAuto.com trq.video/ia-1...
New Fuel Injector from 1AAuto.com trq.video/ib-1...
This video shows you how to replace fuel injectors on your 199-2004 Chevy S10. Fuel injectors are computer controlled spray nozzles that deliver fuel to your engine in precisely controlled volumes. They are one of the keys to modern efficient and clean engines. If a fuel injector is dirty or failing, it can present symptoms such as rough idle, engine surges, rich or lean conditions, and check engine lights. Replacing a problematic fuel injector with an engineered to fit TRQ replacement part right away is essential to the health of your vehicle’s engine.
This repair was done on a 1994 Chevrolet S10 Base 2.2L Standard Cab Pickup 2-Door RWD Automatic and the process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10
Tools you will need:
• Flat Blade Screwdriver trq.video/oSL-...
• Pry Bar trq.video/onp-...
• 10mm Socket trq.video/oLc-...
• 13mm Socket trq.video/oSj-...
• 7mm Socket trq.video/oLc-...
• 8mm Socket trq.video/oLc-...
• Pliers
• 5/16 Inch Socket
• Complete Torx Bit Set
• T30 Bit
• Ratchet trq.video/oWo-...
• Socket Extensions trq.video/oSj-...
• Paper Towels trq.video/ohN-...
• Pick trq.video/okc-...
• Rubber Mallet
Subscribe: / @trq
Check out our playlist:
Chevy S-10 2nd Generation 1994-2004: • Chevy S-10 2nd Generat...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@oldironkeepsmeyoung464]

FYI: This whole video applies to 94-97 2.2L engines ONLY. The 98 and newer S10 2.2L engines use a totally different design setup for the intake manifold and injector setup.

[@T.h.Luke123]

Followed every step and started shooting fuel all throughout my exhaust, awesome

[@jamesvironchi122]

Great video and explanation 👍

[@maineinga]

While you're there doing all the injectors does it make sense to replace the fuel pressure regulator ? Wondering if I should

[@Jusjojoplays]

Are these injectors the same on a 2002 Chevy s10 2.2L 5speed ?

[@onememories8523]

Great detailed video ! Appreciate the video and thank you for sharing!
I have an injector that is leaking. Would replacing the oring on it would fix the problem or do you recommend replacing the entire injector ? Please let me know your recommendation. Thank you again !

[@oldironkeepsmeyoung464]

You can get good injectors reasonably priced. Considering the amount of work to get them out, might as well replace with all new injectors. That way, this part of your truck should then be worry free for MANY thousands of miles once again.

[@onememories8523]

@@oldironkeepsmeyoung464 agreed! Replaced the injector already. Leak check good. Going strong......many many miles go to !

[@XxSKYLINExX29]

Can you make a video of how to take off fuel pressure regulator on 1994 Chevy s10 2.2

[@scottsherwood8555]

Everything about this video was great, except when you got to the installation of the fuel injectors. Sure number 1 is easy to seat, but how do you seat number 2,3, and 4?? You didn’t show that, I had to make up a jig with a strong back to push against to seat them into their respective holes. It would have been a lot more helpful to me if I knew and saw how you seated them in place. If there’s a special tool to obtain to do this, that would have been helpful to know about?! Please be more specific in the future for us laymen.