LG Drain Pump Replacement fix WM2650HRA step by step
ฝัง
- เผยแพร่เมื่อ 21 เม.ย. 2020
- if you need to purchase the drain pump click below
amzn.to/2Tv4CUN
Hi guys! if you find this video useful you can help me by donating , it don’t matter if it’s a small amount. Anything counts , link down below Thanks ^_^
www.paypal.me/FixitFelix529
whats up guys!!!
on todays video I will show you how to replace the drain washer
please be very careful while working and make sure you disconnect the power cord - แนวปฏิบัติและการใช้ชีวิต
Hi guys! if you find this video useful you can help me by donating , it don’t matter if it’s a small amount. Anything counts , link down below Thanks ^_^
www.paypal.com/paypalme2/FixitFelix529
*From an underpaid, over worked husband:
THANK YOU!!! fixed in less than an hour with the pump ordered from Amazon🙌 The wife already had another washer/dryer SET picked out🤦♂️. Should have seen her face when I yelled out “FIXED!!!” LMAO
I am happy to help 😊
I really like your detailed screw by screw step video from taking apart to putting together. It gave me confidence that I wouldn't forget a screw putting the washer back together! Following along on my laptop was much simpler than other videos that just cut to another scene or bypassed the reassembly process altogether. My only surprise was when I got to removal of the drain assembly on our LG WM3875HCA I had a lot more steps. I found ours also had a recirculating pump on the other side of the drain assembly. In addition the whole drain assembly was mounted on a metal plate that was screwed into the bottom with three extra bolts, then had to remove another three screws to remove the drain assembly off that plate to finally be able to remove the drain pump off the side. Wasn't that hard to figure out and getting to that point was a breeze using your video. Many thanks!
I am happy to help 😊
Very informative and easy to understand video! Thank you for saving me $550 in labor!
Glad it helped!
Excellent video. Thanks for doing it. Using the video I was able to replace my pump in approx 50 mins. My machine is slightly different than that in the video but it was essentially the same process. I used a set of vice grips to reinsert the retention spring which made it a breeze. That was the only part that concerned me going into this project but it was actually very simple. The wiring harness at the door was a bit tricky to get off. It took me a few minutes as I couldn’t get a good grip on it. If I had to do it over, it would have been simpler to remove the two screws holding the door latch and push it through leaving the harness in tact. Otherwise just be sure to have a bit of a system for your hardware and you’re set. This video saved me several hundreds of dollars. Thanks again!
Great video. I hated doing the door seal spring so much that I went in from the bottom to avoid it. Your video helped me when I was feeling around in there blindly. You da man
Excellent! I just had to replace our pump for the second time in 8 years and I found it much easier this time following your video. Thank you so much. ^_^
What happen when pump have problems
Thank so much for a very detailed and easy to follow video. You saved me money from having to hire a repair man. I appreciate videos like this on TH-cam to help with hone appliance repairs.
Just ordered the pump based on your recommendations. Thank you so much for making this video. Can't wait to get this LG working again. (I have the red model too!)
Thank You Felix, LG wanted $410, but thanks to you it only cost me for pump $30 and spring Plies $12 a total of $42..Will be sending you my appreciation. Thanks again.
Super great video, I went and bought the drain pump and follow the video and now my washer drains no problem at all.
You are the BOSS, I did mine in less then 3 hours and that included a trip to O'Reilly auto to get a new 5/8 inch drain hose as the old one was full of hard water deposits and couldn't be hollowed out. Thanks for the video, cost me only $25 for the part and a no hassle replacement.
I am happy to help 😊
Thank you so much bro you saved me a lot of money and it was simple from just watching you. I orders the part through your link and received it the very next day. My whole family thanks you 🙏🏿🙏🏿🙏🏿🙏🏿
Great video, the step process was simple and easy to understand. I was able to replace the drain pump and saved myself $225 that a repair guy was wanting to charge to replace this.
Thanks; took mine apart yesterday to make sure I got the right part, ordered it, got it, all fixed. 😀
Thanks for the video guide. Ordered a new pump using your link. Tomorrow it all goes back together.
Your video was excellent. I replaced the pump with no issues. Thanks to you, I saved over $1,000!!
Happy to help. 😃
Took it apart just waiting for the part. Thx so much! I hope it’s the right pump! Wm2650hwa is what I have.
GREAT VIDEO THANKS!!! My pump was a little different, 3 bolts going down into the frame on rubber cushions. Also two additional small hoses. No big deal there. THANKS AGAIN!!
yeah same, these were a little harder to get out as they are awkwardly placed in there.
Thank you! Very detailed steps and this helped me save from buying a new one ! ❤️
Thank you very much. Your instructions were perfect. My only issues were some rusted screws and putting the spring back on; it did take two people. One suggestion, I wish I had marked the orientation of the pump to the housing before I took it apart. After a few attempts, I put the assembly on my desk stepped through your assembly and orientation. It is about the only thing one can screw up. The washer is working as I write this. You really did me a big favor by doing this,
I am happy to help 😃
I purchase the tool for $12 on Amazon.
Haha we had the same issues. Orientation on pump and the stupid spring and rubber part.
Really appreciate you taking the time to make this sir. Thank you. Helped me a ton.
I replaced it, drain pump watching a different video for a different model, same brand front loader. But yours is more clear and simple, I had a little bit of trouble with the orientation of pump, I just used common sense since I couldn’t remember how it was when I took it off, and I should it marked down. Lesson learned. Had to take it apart and repositioned It worked. I was more scared of the wire with the spring around the door rubber seal it turned out to be much easier than I thought. My sister was happy that her front loader is now draining good and strong 👍
I am glad my video helped you and happy that your sisters washer is fixed 😊
Thanks man. Don’t have the same washer but the process was the same. Saved me from buying a new washer.
Just replaced mine following your video. Mine was slightly different but your video helped out a ton. Thanks!
You’re welcome I am happy to help 😊
Thanks Felix. Saved me a lot of money doing this myself. Mine was a different model, but not much different.
Happy to help 😊
Nice job you explained everything very well i would have liked to have seen the pump working or have heard it pumping
Great video. Thank you. Replacing that wire spring band is a royal pain. Just found the LG spring expansion removal tool ($18 on eBay). Absolutely worth the money. Wish I knew about it sooner.
Happy to help 👍🏻
You are a rockstar! That was super great filming! You saved us hundreds of dollars. Thank you!
Hey Fix it Felix I watched this vide then I purchased the part and fixed my washer. Your greatTTT It was very difficult getting that ring on .
Yeah that ring is a pain sometimes 😞
I'm back, had to replace again due to sand that destroyed the pump, helpful tip, when re-installing the metal ring o, coat the rubber groove area and the ring with PAM or some other spray on vegetable oil, makes putting that steel ring on MUCH easier
Fantastic video. Easy to understand. Washing machine works beautifully now. Thank you!!!
Great video!! I changed this part on my washer from this video and I’m a woman. Easy step by step guide
Thanks for the video! It was very helpful. Just an FYI, the seal was incredibly hard to put on.
Great video. Very important to purchase an OEM certified part as cheap replacement pumps will fail again within months of average use.
So are u aren't u?? What kind?
Sorry was suppose to b a txt
Oh sure, NOW you tell me. I'm going to get really good at this.
Thanks a lot Felix. Just got the ol girl put back together and it works great!!
Thank you for the info. Piece of cake using your instructions. Very well done!!
Great video! I will be tackling this job this weekend 🙏🏾
Many thanks for the video, your LG nearly the same model as mine, with the same problem!
you're THE MAN !!!!.thank you.I got it out just waiting for the new one
Got dang man 🤦🏽♂️. So I have to do all of that huh. My wife just ordered the pump. We have the same washer. I’m used to taking apart our dryer, but NEVER did work on a washer before. This will definitely be a project.
We have the exact same washer and the dryer stacked on top. My husband pulled it out tilted it back and went from underneath he removed some screws and sawed the plastic to make an access point he fixed it and put it back together. Took 2 hours tops.
Awesome video! Walked me through every step! Thanks Felix!
Happy to help 😊
Thanks for your video, it helped me a lot. Greetings from Mexicali, Baja California.
Thanks Felix for putting this together! Very helpful! Muy amable!
Thank you for this great help video saved me a 1k replacing my washer
Thank you for the video. I was able order the drain pump from your link and fix it myself.
Happy to help 😊
Thank so much, I seen a lot of videos on this and your helped out the most.
Fixed it Felix - thank you for the help!!!
You are Great!!! You saved me from buying a washer.
I'm signed-up. Keep Going!
Thanks 👍🏻
Awesome instructions and video!! You made it look so easy Thank You
Thank you! I really appreciate your help!
Thank you! Your step by step saved me!
Excellent video - just make sure to check that the connectors are pressed firmly on the new pump terminals and probably check continuity through the back of the terminals) or you might get the pleasure of a separate teardown to fix said issue ;-) Also, probably a good idea to pay the $13 or so on Amazon for the spring remover pliers as it makes the spring removal/replacement job much easier
Thanks Bro. $10 tip by pay pal! Down with the replacement mindset!
Thank you so much 😊 God bless you and your family
Thanks a bunch!! Very clear and straightforward
Thanks for the video. It help with fixing my washer.
You’re welcome. Happy to help 😊
Excellent tutorial! Saved me a lot of aggravation!
Very helpful with the video I was able to fix it on my own thanks bud..
Ur video is my favorite of these LG videos..very good closeups. Also nice watch! Which one is it?
Excellent video. Thanks you just made my job easy after seeing this
Thanks Bro your video was a big help! 💯
Thanx for the content! My washer works now 👍🏼
wow!!!! Thank you so mutch my guy u help me out so mutch 🙌🏽i was looking for a vid like this thanks you sir u have earned my sub&like🙏🏽
With your video, did it like a pro. Great stuff.
Great to hear!
Great step by step video. Thanks!
Thank you so much for making this video!
Your video saved me $$$! Say, does it matter which wires go where on back of pump? I ask because I took a photo of my pump and the wires are reversed.
Some guy wants to charge me $250 to fix my machine ....thanks to you I fixed it myself .
Thank you sir.. perfect instructions!
Perfect instructions thank you problem fixed
좋은 영상 감사합니다
Perfect video, thanks
Very informative! Great job! 👍🏼
Totally worked !!!!!! Thank you!!!!
Awesome man!!! You saved me like 300 bucks!!! Thanks 👍
I am happy to help 😊
The BEST DIY video!!
Great work, thanks for your time & effort, I did fix it w/your instructions.. be well, stay successful & God bless.!
Thank you. God bless you too 😊
You the man, thank you.
Thank you for this. It helped me a lot to fix mine. However, when I put it all back together and double checked everything, when I go to press start, it just keeps blinking and the washer won’t start. I hooked everything back up including the sensor on the door. Any help on this would be greatly appreciated.
Excellent video!!
This video helped me so much! thank you
You’re welcome ☺️
my old pump has the plastic housing connected to it so I cannot remove it and put it around the new pump before screwing back on to the pump drainage assembly. Is there somewhere to buy the plastic case part? (the white plastic at 10:09)
Very nice thank you so much
Gracias save me some money , great video !
AWESOME VIDEO!!! THANK YOU SO MUCH. I hope your next video is how to replace the battery in that smoke detector that keeps chirping in this video ;).
I’ll pass the message to the owners of the house 😆 I was just there to replace the pump. 😂
@@FixitFelix529 😎🤠😎😎😂😂😂
Great video
Hi brother i have the same washer machine i try to turn it on i see only the light is not working u think is the same problem like in this video
Thank you!!!
Well ima give a shot hope it works for me bud… just subscribed btw
Hello, so a person we hired to fix our washer they did their best to try and fix it he even showed me the drain pump was working and we crossed out the issues we thought it had and our conclusion was the circuit control do u have a website to buy parts or do u know where to get the part.??
This saved me. The same exact problem. Thank you
Use a couple plastic bicycle tire tools to get the spring back in place. They slide better than a screwdriver and won’t rip a hole in the rubber boot
Thank you so much. I could have never done it without you. Thanks.
But putting spring back on? Impossible.
Glad I could help!
Excellent video, thank you, the background music though?
How do you know which part to replace …the top one called the water inlet valve or the bottom one called the pump?
U did nice job
Great video...saved me from calling a repairman
Ok I did it. I’m just having troubles trying to put the fitted ring back on. That thing is hard to do. I had to stop because it’s stressing me the heck out.
Felix, you just saved me $300! You are the man.
I am happy do help 😊