Like any AR platform it will run cleaner with with a non traditional suppressor. Of the two I have on it, it runs cleaner with AlleyCat. In general it just runs regardless. I just keep it lubed when needed.
Mine came with one hand stop, one barricade stop, and some cable management scales. I did notice your upper on the very top is stamped noveske and ID, mine does not have the ID marking on the top of the receiver near charging handle, just a noveske stamp. Very nice setup!
@@Seansanta307 thanks brother I take it yours has the irregular’s stamp on the left hand side still? someone else said they received two hand stops as well on top of the other stuff just no barricade stop
@@rytacarms yes it is stamped on the left hand side! Just got through the first 1k with it today. Not a single malfunction, quickly wiped down at 500rds and lubed along the way. Shooting all unsuppressed.
@@Seansanta307 good to hear,I’m creeping up on 1k by this weekend but probably won’t clean it till about the 1500 mark when I do the accuracy test and take it out to the long range (200-600yd) with an lpvo set up. What’s your buffer set up for any non suppressed folks ?
@@rytacarms I started with the geissele super 42 with H2 weight, but heard really good things about the A5 system so went with that in an H2 weight, spring-co green spring. It currently shoots almost identical to the geissele system. Ejection patterns are between 3:30-4:30 with both. Both are great for it being unsuppressed. With some old .223 ammo I would not get last round bolt open every time on empty mags but with full power 5.56 I haven’t had one issue.
My ID upper also only came with one of those two hand stops and only the Noveske logo stamped by the charging handle. Runs really nice with the sci six tho
@@DennyTruong primary arms just got them back in stock like a day ago. I got mine from simple man armory,since primary was out at the time Edit nvm they sold out last night
@ I did too even after I bought mine and never got a notification untill I checked while I was at work this week. So be on the lookout out probably around Jan 1st… if I see anymore I’ll reply to this comment
@ sc irregulars emailed me back to go ahead and send it but I may just open it and use it or swap it for the 1913 pic rail version to throw on a spear lt.
@@dolan_offline did 50 rounds this day and 50 that same weekend. It pushes a a5h3. Buffer with 556 so yeah it definitely runs unsuppressed. Check my recent indoor range vid where I ran a h2 buffer with 556 and 223, flawless with last round lock back every time Your good to go with this upper in my opinion
@@dolan_offline I just hit 1k today all unsuppressed. Not a single malfunction for me. I wiped it down a little after 500 rds, and lubed it up good for the next 500. Just adding some lube each range session.
Man it seems like it is but running the a5h4 to h0 there’s no gas to the face at all. No to mention going from non suppressed to suppressed with a high pressure and flow through can there’s no change in ejection patterns… so weird I think it has to do with the dwell time. I saw on Reddit that the gas tube has a giant hole to help run suppressed or not,therefore tonight I’ll be pulling the gas tube off and swapping it with another one from sons of liberty-regular size tube port. Ideally I would want this to run with h0-h1 a lot soft vs h3-h4 buffers
4800 rounds through mine and have cleaned it once. Suppressed full time with either ScI-Six or AlleyCat 556. This thing runs!
Hell yeah that’s what I like to hear, is it just more or does this gun run pretty clean suppressed for a di gun ?
Like any AR platform it will run cleaner with with a non traditional suppressor. Of the two I have on it, it runs cleaner with AlleyCat. In general it just runs regardless. I just keep it lubed when needed.
Which do you prefer of the two? I have the same gun and plan on either getting a AlleyCat or Sci-Six.
@@joshuasaltsgiver6586AlleyCat in most cases.
Run mine with a polo k just under 3k and cleaned it cause I was bored one day not that I felt it actually needed. Never a hiccup
Mine came with one hand stop, one barricade stop, and some cable management scales. I did notice your upper on the very top is stamped noveske and ID, mine does not have the ID marking on the top of the receiver near charging handle, just a noveske stamp. Very nice setup!
@@Seansanta307 thanks brother
I take it yours has the irregular’s stamp on the left hand side still?
someone else said they received two hand stops as well on top of the other stuff just no barricade stop
@@rytacarms yes it is stamped on the left hand side! Just got through the first 1k with it today. Not a single malfunction, quickly wiped down at 500rds and lubed along the way. Shooting all unsuppressed.
@@Seansanta307 good to hear,I’m creeping up on 1k by this weekend but probably won’t clean it till about the 1500 mark when I do the accuracy test and take it out to the long range (200-600yd) with an lpvo set up.
What’s your buffer set up for any non suppressed folks ?
@@rytacarms I started with the geissele super 42 with H2 weight, but heard really good things about the A5 system so went with that in an H2 weight, spring-co green spring. It currently shoots almost identical to the geissele system. Ejection patterns are between 3:30-4:30 with both. Both are great for it being unsuppressed. With some old .223 ammo I would not get last round bolt open every time on empty mags but with full power 5.56 I haven’t had one issue.
My ID upper also only came with one of those two hand stops and only the Noveske logo stamped by the charging handle. Runs really nice with the sci six tho
Siiiiiiiiiiick AF
Thanks brotha
Where did you pick yours up? Can’t find anyone that has this in stock?
@@DennyTruong primary arms just got them back in stock like a day ago.
I got mine from simple man armory,since primary was out at the time
Edit nvm they sold out last night
@ appreciate that! I put my name down for the email alert, thanks for doing this video. Very helpful!
@ I did too even after I bought mine and never got a notification untill I checked while I was at work this week. So be on the lookout out probably around Jan 1st… if I see anymore I’ll reply to this comment
@ I appreciate that! Did you end up returning the OMM mount?
@ sc irregulars emailed me back to go ahead and send it but I may just open it and use it or swap it for the 1913 pic rail version to throw on a spear lt.
What grip
Is that ?
@@willpizza1 Edgar Sherman design
@ sweet thank you I have the 10.5 from
Novekse love
It
@ no problem brother,what model/gen ?
@ think it’s the one before this one due to the holes in the upper rail
Ah so probably gen 3, prefer that lower out of all the others they make
opening up a Noveske product is better that getting Christmas presents from your rich Grandparent.
@@Fraggle91 lol exactly
How many rounds did you shoot unsuppressed? does it cycle reliably being an 11.5 mid? i’m picking one up this week and gotta save money for a can😂
@@dolan_offline did 50 rounds this day and 50 that same weekend. It pushes a a5h3. Buffer with 556 so yeah it definitely runs unsuppressed.
Check my recent indoor range vid where I ran a h2 buffer with 556 and 223, flawless with last round lock back every time
Your good to go with this upper in my opinion
@@dolan_offline I just hit 1k today all unsuppressed. Not a single malfunction for me. I wiped it down a little after 500 rds, and lubed it up good for the next 500. Just adding some lube each range session.
How much was upper? Sick AF!
1600 non-taxed outside of the state so just that and shipping, definitely wasn’t cheap but it’s nice.
Did your trash panda just screw on or you had to use a aftermarket mount?
@@JSwizzle11 I put a q cherry bomb I’m for a few rounds
Mine didn’t come with barricade stop either
Did it have both style of hand stops ?
Seems a little overgassed.
Man it seems like it is but running the a5h4 to h0 there’s no gas to the face at all. No to mention going from non suppressed to suppressed with a high pressure and flow through can there’s no change in ejection patterns… so weird I think it has to do with the dwell time.
I saw on Reddit that the gas tube has a giant hole to help run suppressed or not,therefore tonight I’ll be pulling the gas tube off and swapping it with another one from sons of liberty-regular size tube port.
Ideally I would want this to run with h0-h1 a lot soft vs h3-h4 buffers