Motorcycle Air Filter Inspection & Replacement - CBR 250R
ฝัง
- เผยแพร่เมื่อ 25 ก.ย. 2014
- I inspected and replaced my air filter for my 2013 Honda CBR 250R motorcycle. This is a very simple 5-minute maintenance that anyone can perform requiring only an allen wrench and a philips screwdriver. The OEM air filter is so cheap that you can replace it every other season to ensure your motorcycle is performing at its top level. The process is very similar in most Honda sportbikes. Don't forget to subscribe and thanks for watching.
Product Link: amzn.to/1JeIHmP
You're a genius and very humble 🙇👏 Love from India
And I have the CBR 250 in red
I lost my manual :( thank you for this video. We have the same bike so these videos have been SO helpful to me.
you deserve more subs man thanks for the knowledge
Thanks for the compliment. Ride safe.
Just did mine on my 2016 300R. Nice video! The cover also helps to keep the filter locked in because the tabs aren't the greatest security.
I Love my cbr 250r! I'm from Brasil!
Nice vídeo! Congratulations!
Nice tutorial very easy to follow... Can you make tutor how to change your spark plug (cbr250) there aren't lot good tutorial for this bike . it would be nice
Thanks for the video bro. It was very helpful.
This is the third video i watched of yours tonight! this will be the first thing i do when i get the bike going again! Great idea.
John Riley As an aside, some of the more experienced riders saw this video and told me that my air filter was still good. So if yours is in a similar condition as mine in the video, you might want to hold off. Then again, the filter is cheap anyway. And thanks for watching. :)
BrownBrady
Ok well i may take it out have a look vacuum it possibly. Like you say a cheep item to buy i have seen, heard people say its a good idea to do so im sure ill do that.
Awesome video, abit hard to search but thanks alot
Very well made videos, looking forward to your future video
shannon dcruz Thanks for the kind words! Ride safe!
Pretty cool and helpful bro
Thank you!
This is a common issue with changing the stock exhaust on a cbr250r. The only way to fix this is with a tune on the ecu or a piggyback fuel controller. What is happening is your O2 sensor is going crazy because when you changed the exhaust more air is flowing out the exhaust and the ecu reads that as an error hence shutting off the bike. I could be wrong but this is my knowledge on this issue.
TEŞEKKÜRLER
Thank GOD this isn't like my ninja and I don't have to take off my tank lol. Your videos are always helpful you deserve more subs!
+Squid Rider Thanks bro
So did this fix your stall problem?
I don't really care about the occasional stall at cold start, but I noticed that on warm days there is some loss of power during full load under wide open throttle. I'm going to try to change the filter, which has probably never been changed. This is probably the cheapest and easiest troubleshooting to begin with.
Awesome
sir can u show us hw 2 flush and change oil coolant for cbr 250r !!
how to connect the speed sensor to speedometer for cbr250r??
grate and clear video ... bro after how many km oil filter and air filter should change
+jagadeesh munigala I change my oil every 5,000 Km and at least once a year.
hi, great job, can u advise me a 500cc range motorcycle to buy?
Ninja 400
Hey new sub here, I saw you have the helmet lock wire, the one that has two metal loops on each end at around 0.27, I wanted a similar one, any link to the product?
+frozenflames4 To be honest, that helmet loop is too short. I recommend getting a longer one or something like this which I prefer: amzn.to/1F2ABxg
Br o were are u from
Hey buddy, I am having difficulty in stabilizing two tabs, I push it upward and it popus down itself. Help me
I haven't done this in a while. I think there is a track that the filter needs to slide into. Look at 3:54 part of the video. Push up at the filter while sliding it in.
BrownBrady, BrownBrady, got it done buddy, thanks for the help. I changed the old one today itself and it was a bit more tight too. I tried as you mentioned with a bit more force while placing the two tabs and its done, perfectly. Thanks bro
Endy endy nice work. Ride safe.
"Previous owner" is this a second hand bike..?
seal the default air intake hole.. and keep the lid open... get better sound..
I'm getting really weird sound do you think it's from air filter?
+120次呵今天在我（祠堂） It could be anything. But rather than spending a lot of time troubleshooting, replace the air filter and see if that makes a difference. It's only $10.
which air filter is this?
+Howler Honda That would be the OEM air filter. Product link is in the description.
+BrownBrady ahh cheers, wat do you ride now, if u don't mind me asking, have a few plans for my baby ceeber, a custom bottle cap exhaust, a piggy back ECU, head work, petal disc change, all before a k &n airfilter n exhaust change, I'm curious both these changes only do I need to do the ecu remap like immediately?
I’m new to this channel and just got want to say your channel is great 👍
Hey new sub here, I saw you have the helmet lock wire, the one that has two metal loops on each end at around 0.27, I wanted a similar one, any link to the product?
+frozenflames4 To be honest, that helmet loop is too short. I recommend getting a longer one or something like this which I prefer: amzn.to/1F2ABxg