Ninja Coffee Maker Fix Part two
ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2024
- This is part two of my video where I fixed my Ninja Coffee Maker in this video I show you how I cleaned and put the Ninja Coffee Maker back together I did my best to clean out the heater element but if I can find where to buy new parts for the Ninja, like a new heating element I would definitely do that!
![CAMPปลิ้น | EP.83[1/2] เปิดแคมป์หลอนต้อนรับ 2 ตัวพ่อแห่งวงการผี!](http://i.ytimg.com/vi/2uPuHYHgwiI/mqdefault.jpg)
Hope you were successful!
I am going to try this. I have had one of these sitting on a shelf for a year while I ponder on how to fix it.
The gunk from the boiler eventually clogs the shower head of the percolator section. Best to mechanically clean the boiler, use a bit of dilute acid to clean the shower head and tube. Still made me do a clean cycle even after mechanical surgery..
Good job man!! If only these companies would better design to easily clean these when this happens!! How many throw them away because of this? Thanks for sharing!!!
I'm glad to know my video was helpful!
Super. great info.
Muy buen tutorial súper ya arreglé mi cafetera gracias 💪🏽👍🏼👌🏾
Que bueno que pudo usar mi video como referencia!
Hi what is the tube inside the heating coil made of- metal or plastic?
Hi well I think you are referring to that little toob. I'm cleaning in the video section 11:22 of the video. If that is what you are talking about, well, that's actually part of the heating element itself, it is made of aluminum, the heating element is like a funnel it has the narrow part that looks like a tube and the wider part that has the cap with the rubber seal section 4:24 in my video I show you how I removed it! Hope this answers your question!
Hi. Would you by chance know how to fix the drip piece to the Ninja maker? I called customer service and they told me I need to buy a new one. I can't afford one and that's the part that is not working anymore.
Hi Natasha well is the Drip piece broken clogged can you send me a picture or video and the model number of your ninja coffee maker to see if I can help you you can send pictures or video to my email if you like jroman106@yahoo.com or you can reply here! glad to help have a grate day!
Have you found a way to remove the handle from the carafe? Nasty under there.
If I recall correctly, you have to pry that silver linning on the grip off, and under there, there is a screw! Sorry for the delay I have been out of the TH-cam loop for a while.
Do you have instruction on how to open the Ninja CE251 Coffee machine?
Hi, no, I don't. I just dig in and figure out how to disasembel it my self, that's why I made the video culed not find one myself on TH-cam to help me fix mine and decided to make my own to help others!
Hi,
Not having a problem with beeping but I do have a problem with enough water filling my cup.
Happens on all settings of brews, clean the system water with white vinegar, fills the coffee cup with two short water fills for getting the coffee ready for the large filling.
Any suggestions.
Regards,
Hi, sorry for the delay. Well, the problem is eather the board timming for shutting off the water into the heter chamber has an error or a bad sensor is what I can think of!
Hi sorry for the delay did not realize I had my questions for this video my apologies if it helps the reason in my opinion the Ninja after a while accumulates calcium formation in that heater element limiting the amount of water retaind in the reseware some how the water level sensor is thrown off and shuts down the coffee maker befor the cup is full that was my problem as well so I decided to investigate taking it apart and thats where I found all that gunk calcium resedu buildup as soon as I clear it out, the coffee maker was working fine!
hose clamps not grommets
Hi Natasha can you explain what the problem is with the drip is it not working at all or slow! it could have calcium build up like my coffee maker had you culed you send a video of the issue so I culd evaluate it if you like, my email is jroman106@yahoo.com here to help!
Waste of time