Thank you so much for this!!! As a beginner i am brand new to all of this and I think a lot of veteran snake owners don’t understand they’re not dumbing it down enough. I honestly could not figure out from several videos I’ve watched how to situate the heating mat because they would never go into detail so thank you 🙏
Awesome. I'll keep that in mind. It's just so hard to choose what morph though! We have a Banana pastel male and he's the sweetest. I'm excited to see how he changes with age.
I've had my ball python for the past year & I'm still always watching enclosure videos to better the way I do things. I'm currently building a 5ft upgraded enclosure & have been watching alot of videos so this was definitely a help
@scalezreptiles1813 after I move my BP to the new enclosure I'm going to be in the market for a gargoyle gecko or a crocodile skink to put in the 40gal tank. Not sure which
So you’d know putting a 70 watt heat bulb in a tank that small right in the middle is absolutely ridiculously stupid and asking for a dehydrated/toasted snake
I’ve been wanting a ball python for years and I’m finally going to be living somewhere I can have one! I’ve been trying to find good educational videos and this is the BEST! Thank you so much for helping us snake newbies!
Hey Jocelyn! We have lots of AMAZING ball python babies available right now if you are still looking. Hit me up! Either through Instagram @scalezreptiles or email zachpersin@hotmail.com
This was so helpful! I’m planning on getting a ball python for the first time after being a bearded dragon owner and there’s so much new reptile territory I’m running into! Thank you so much 🙏 🙏
We have some amazing ball pythons available right now if you are interested! Reach out on Instagram @scalezreptiles and I’m happy to help find you the perfect one 😊
DONT FOLLOW THIS GUIDE!!!!! Crazy how wrong this guy is. I’m trying my hardest not to seem like a bad person, I just care about snakes and this is just absurd
I used aluminum foil and it worked hood to hold in heat! Also I added a Tupperware and put Moss in it and that was my snakes humanity box. Good she’d every time. But I like how you explain everything.
If anyone doesn’t want to buy a brand new tank I always suggest looking at second hand tanks first, sometimes people even give them away for free and I got a 75 gallon tank last year for free off Facebook market place.
I was stressing so bad trying ti find a video that hit all of these points. You did an AMAZING job explaining and going into detail, it's a lot more required than many others show and you show that. So thank you for that! instant sub!!
I once had a little lobster that pushed the lid of the tank. The day after it even pushed the lid with a stack of books on it. A strong snake could definitely do it! Funny thing was; he just went for a walk around my bedroom, only to jump back in his tank after he finished his patrols. One time I woke up and he was staring at me, sitting on my alarm clock. One crazy lobster haha.
@@AnaBanksxo if you buy a quality heat pad, and have it on a thermostat that is correctly installed with the probe in the right spot, it is very unlikely of anything like that to happen. However I have seen things like towel burns that were under the tank and under the heat pad that was not plugged into a thermostat so be careful! 😊
Thanks for the tips! Sometimes I worry about over-misting my snake because the vet said he had a small fungal infection that could have resulted from over-misting.
Yeah it’s a real problem! You never want to mist directly on the snake, ever. That can cause sickness. The bedding should just be somewhat damp. Nothing crazy
All you need is a rack system or just plain tubs with drill holes in them for air. And a thermostat. Well plus the heating Source pastil that's the easiest part. The hardest part of taking care of a snake is the setup. After that as long as you know what you are doing, your snake will have an easy life and so you will because it doesn't cost you much money after that
They can be as cheap as 75 bucks and the full setup can be found on Craigslist for 100 to 150 ish. I wouldn’t say too expensive when you think about some reptiles costing in the thousands. If you are ready to get one let me know! We have some great options right now and I’ll hook you up nice. Our ball pythons range from 75 to 1ks so we definitely have variety! Feel free to reach out on @scalezreptiles
I 100% love ball pythons but since they get so big and their setup is also pretty big, i settled for getting a corn snake (will get one soon). I feel sad but I’m still gonna get a ball python as well! ❤
I would not worry about ventilation honestly. Cover 80% of the top if you can with a towel or plywood or plexiglass is preferred. Then the remaining 20% Of the top would be covered by heat lamps. They really don’t need much other ventilation
@scalezreptiles1813 thanQ for your reply, all very clear.....I think I'm overthinking...I tend to do that when my hobby means a wee life depends on me.....cheers..🥃.I'm going to binge watch your channel later.🏴
It’s more about the temps reading in the enclosure. Not necessarily on the thermostat. For ball pythons the hot spot should be 91ish +\- and cold side around 78 to 80
Have you tried reptile prime coco substrate by brian barczyk? I holds the most water and stay dry on touch for bp belly. I used repti-chip previously. It it relatively more difficult to do spot cleaning with repti-chip compared to reptiprime.
I got a baby ball and used a 55 gal fish aquarium. I never had issues heating the tank. I named him “hebi” Japanese for snake and he is beautiful and big!! Super fun and has a great personality. Never had issues with feeding and he has never refused food. Transition from frozen mouse to frozen rat was easy as can be. No problems with shedding or anything else. Im learning everything as I go. I do have a question tho! He got out for the first time the other night and I found him I the hallway just chillen looking at me lol so I added a paint can on each side of the tank, there is a clip on either side, shoebox in the middle full of cards, 1 gal water bottle on the side as well. How can I secure the top better?
I highly recommend you use a slide top enclosure (slides left to right and click in place) not one that just pops up when the snake pushes. Those are really not made for snakes. Glad your snake is doing well!
@@scalezreptiles1813 I have been looking for one but have been unsuccessful.. I have a 55gal aquarium tank that at one point was our fish tank until I upgraded my wife to the 75 gal she has now. When I him petsmart did not have a 55gal cover so I had to buy 2 40gal (I believe it’s a 40) screens and they fit perfectly. In the middle I had to bend the edge of the screen lip to make it flat. I have 3 cage clips for the back of the tank on each screen next to the wall side, I also have another clip right in the middle of the tank on each screen. Today I went to the hardware store and got 4in wide heavy duty velcro and attached that to either side of my tank and another 4in peace on the front of tank in the middle of each screens I can now practically lift my tank by the screens, if he gets out of that I shouldn’t be a snake owner lol. If you come across the screen you are talking about for my tank size please let me know
Thank you! It really depends on how often you are feeding your little one. I know some people who feed twice a week while they are growing. So in that cage it would only last about 6 months tops. In other cases where they feed 1 time per week + it could last you a year.
Thank you very much this video was very helpful. I am looking for a ball python it will be my first one As a pet. Looking forward to it . By no means I am looking to breed is not my thing.
We have some amazing choices right now! If you’d like to send me an email we can connect and see if we can find you one that fits your wants! :) zachpersin@hotmail.com
Wouldn’t you worry about a snake potentially moving the thermostat probe/wrapping themselves up in the foil (extremely sticky and sharp) tape if they decide to burrow?
I just wouldn’t recommend a glass enclosure for adult or a baby but if that’s all you have it can definitely work. Otherwise, the explanation in this video works the same for adults :)
@@scalezreptiles1813 thank you for the reply. I just put my new ball python in it's enclosure. I'm just having a hard time keeping the basking side at a steady 90 95 degrees. Im also using a circulating fan in the room to keep the humidity down
@@scalezreptiles1813 I was using the fan because the humidity in that room gets to around 80 percent and I heard that is to high. What do you recommend?
There's one thing I don't get, why a Heat mat and a CHE bulb? I ask because people in fb groups are saying to ditch the heat mat and to just use a CHE bulb instead. They have these big wooden vivs with just a CHE for heat. I'm so confused? Love the video, so detailed, thank you.
I'm beginning to think a lot of these groups are overcomplicating things for the sake of "perfection" but it's only creating more confusion. I've been pretty confused myself but I'm starting to gather that there's realistically no one way to do it. If you want to run a heat mat, do it. If you want a CHE, use a CHE. But I'm also seeing UVB, DHP, etc being recommended as well. It's tough for me to pick because I bought just a regular heat lamp from zoo med and one of their bulbs. I'm probably gonna use it and monitor temps to make sure it stays consistent. If it doesn't work out, I'll probably go with a CHE.
@@M45T3R_B8ER you nailed it!! Exactly, too much info and looking for perfection. My comment was a moth ago. Since then I'm just using a 100w CHE bulb in a wooden vivarium. That's it. Humidity and heat is perfect.
@@M45T3R_B8ER Seriously. I'm so frustrated I've literally considered giving this adorable ball python back to the neighbors that didn't want it anymore. I know I've vastly improved his living situation, but those forums (Reddit and FB) have made me absolutely crazy with second guessing, buying stuff, sending stuff back, wasting money and time trying to achieve BP Nirvana. He came to me with a heat mat and a 150 watt Zilla day white bulb on no thermostat, in the middle of the tank with no decor. I'm now running a DHP on a thermostat, heat mat on a thermostat, and a Forest Dweller UVB bulb. Being told I ALSO need a halogen spot, also on a thermostat, ditch the UTH, and I MUST have wifi enabled hygrometers/thermometers to remotely monitor conditions. Sheeeeeeesh.
@@scalezreptiles1813 That’s not correct. We have evolved our knowledge in the reptile community and now know that a shade dwelling uvb light is beneficial for ball pythons. I recommend Arcadia Shade Dweller Pro for light/uvb cycle. 12hr on, 12hr off.
I don’t at the moment but you can basically use everything I said in this video just on a larger scale. So I’d say at least 40 gallon tank or larger. Preferably pvc or something non glass. If you have to use glass it’s Okay just cover the top to keep in heat and humidity
Did you just recommend that new owners _not_ track the temperature and humidity with gauges? There's nothing wrong with newbies keeping track of such things. Especially given that quite a few will not follow your instructions perfectly. Also, different regions have different relative humidity, so that can make a difference in the tank - as well as the temperature people keep their houses. The gauges can let people know when something is wrong _before_ it screws up a shed, causes an URI, or makes them go off feed.
Thanks for your comment Charles. I definitely recommend people track the temperatures using gauges. It’s the humidity gauges that I do not believe are necessary and most of the time I believe people rely on them too much and in turn cause RIs because it’s reading 50% humidity (when in reality it’s 90%) so they keep getting it more and more wet. I understand people live in different regions and relative air humidity is different. But if you follow my general rules of thumb you will be completely fine for ball pythons. Covering the top of the enclosure is key. And keeping the substrate lightly damp by spraying a couple times a week is all that’s needed
hey how's it going? greetings from Brazil. Could you explain the measurements to me? Because around here we don't say "10 or 20 gallons", so I don't understand kkkkk, thanks.
Coconut fiber is cheap and can hold humidity well but also holds bacteria as well and as the tendency to get stuck in a ball python’s heat pits and if consume can cause impaction Your better off going with mixture of 40% topsoil 40% zoo med repti soil and 20% playsand substrate should be about 4 in deep Ball pythons are shy creatures so covering up three sides of the enclosure will help your snake feel more secure comfortable and confident in it's enclosure
@@doit4chicago25 I find this whole comment to be misinformation. Why mislead the entire reptile community because of pride?? Do you have any links to back up your claims?? Coconut husk and fiber is by far the best substrate for ball pythons, and it’s agreed upon by most of us in the community after many years of raising snakes.
@@nigelsreptarachnids5931 the only misinformation is the one you're spreading and misleading the reptile community Tell were in Africa can you find coconut fiber or coconut husk substrate
My probe says to not get it wet, so I have attached them to where they are under the hide and just above the substrate on the side of the tank. All seems to be going well, but CAN I attach it to the bottom with it touching the damp substrate then? I also have the 10-20 gal pads for the 20 gal tanks along the back edge lengthwise because the 30-40 gal pads wouldn’t fit width wise. They spend the majority of their time on the cool side in their hides, and I have the electronic probes adjusting the heat accordingly so I know the temps are good. And yes, I’m checking with the temp gun like we talked about. So did yours fit width wise fully on the glass without any issues? Thanks Zack! Great video btw 🤗
It did actually seem to fit lengthwise. It may have stuck out less than an inch but ultimately did the trick of covering 1/3 the cage. And yes, I’d say you can put the probe under the soil on the glass. I do it all the time with those thermostats. I think it meant more so not to put water on it directly like spraying it, because it can then read the temp of the water versus the hot spot on the glass.
This setup is actually really bad. Don’t use fine substrate. Don’t put the probe on the base. Don’t put tape in the enclosure. The second hide is not even a hide. 40gal is minimum size. You need the thermometers and hydrometers. Put the CHE above warm side. Please don’t follow this!
NEVER put any form of tape inside a snake enclosure. Literally one of the first things anyone ever told me before I bought a snake. Literally common sense
This is absolutely ridiculous? A 70watt heat lamp right in the middle? Absolutely no escape from the warmth. Both sides are going to be atleast 27c dunno what that is in F. genuinely shocked by this video, so wrong it’s unbelievable
@JuniorJohnson-jo7evdon’t stress, as long as the enclosure is around as long as the snake, a bit of humidity, and like you said a hot and cold side, I have 2 thermometers one on each side of the tank because imma helicopter snake parent, but they’re tough, a small issue won’t permanently harm your snake, maybe mild discomfort on both of you, but you’re good 💪🐍
I def dont agree with you 100%, but as others have said u def went over alot, and i dont see anything outrageously bad. Just things i would do differently, as in the substrate. 40-50 watt Che's arent powerful enough, u really need 60-75 watt as u said to get the ambient good. Also many thermostats aren't designed to work with Che's, so make sure the one u get will if thats its intended purpose. Also put the che on the hot side to get a better temperature gradient... especially in a 20 gallon. Way easier to mix ur substate before u put everything in the tank 😊
Geez this is a lot I didn’t think it was all this to keep a reptile 🐍 I might as well buy a dog! I have known other owners who just had a heat rock and a towel and their snake lives still to this day
Putting the probe inside is not a great idea. All you do is put it in between the heat mat and the bottom of the tank. Yes, it will read hotter than the actual area inside the tank, but that’s why you set it a few degrees higher than the temp you want, and make sure the temp inside is correct with a temp gun.
Tape inside the aquarium is not a great idea. The snake will eventually get the tape loose and get stuck in it. If you want to run the thermostat line inside the tank, you should use a non-toxic silicone caulking to secure it and make sure it dries completely before putting anything in. If the snake manages to break that loose, then you don't have to worry about it getting stuck and injured by the tape.
Everything was great but you lost me with taping the thermostat inside the actual enclosure. That probe should be taped sandwiched between the glass and the heat mat outside the enclosure. There should be no tape inside the tank.
Yeah I agree with you. However sooo many people don’t purchase temp Guns and then don’t actually have the temps right because the probe is outside the cage. So the temps run too low and people don’t adjust for that difference in temps. But I do agree, if you adjust for that, it’s better to put the probe outside the cage
I was going to bash this guy for shooting a video with ADMITTEDLY incorrect props (wrong type of screen top, unrecommended kind of thermostat, wrong kind of tape). If you’re going to shoot a video, make sure you have the correct props BEFORE you shoot. I know he’s just trying to educate noobs, so I’ll let all that slide. Something I can’t let slide, you never, ever, EVER, EVER use tape, of any kind, inside of a snake enclosure. It’s a recipe for disaster. Place the probe between the UTH and the glass, outside of the enclosure. Tape inside the enclosure, NEVER EVER!
Yep, I would agree! The problem is a huge percentage of new snake owners purchase glass enclosures from petco or petsmart and then struggle to get the environment right. Typically wooden or pvc enclosures can be a bit more expensive so some people can’t afford it. So this video is just to help out in the case someone got a glass enclosure is all! :)
nature doesn’t have heat mats, and temperatures underground tend to be *cooler* than temperatures on the surface, not warmer. So I don't whats the point in the adding a heat mat when you already have a overhead heat source
@@4hounds2humans1van5 my sentiments exactly. This guy is going around these comment sections acting like he knows what he’s talking about but probably just got his first snake a couple years ago. 😆 His pride is too strong for him to actually learn something from those of us that have been doing it for probably as long as he’s been alive.
Thank you so much for this!!! As a beginner i am brand new to all of this and I think a lot of veteran snake owners don’t understand they’re not dumbing it down enough. I honestly could not figure out from several videos I’ve watched how to situate the heating mat because they would never go into detail so thank you 🙏
It is my pleasure!’ :) if you ever are looking for a reptile check us out on Instagram @scalezreptiles we have lots! :)
"We all know you're going to get a 2nd ball python" 🤣 TRUTH. I haven't yet, but I'm already thinking about it lol. They're like potato chips.
Haha right!? It all starts with one.. btw if you are in need of some amazing ball pythons, we have some!
Awesome. I'll keep that in mind. It's just so hard to choose what morph though! We have a Banana pastel male and he's the sweetest. I'm excited to see how he changes with age.
This is true. We bought one, and within the week we’re asked if we would adopt a friends who is moving.
Hello from Texas! I enjoyed your video.
Are you selling your pythons?
@@mizwarren6180 Are you asking me?
This was the MOST explanatory video on ball pythons I’ve seen! Covered every point I had issues on !
Awe thank you so much! I’m really trying to help! I know how frustrating it can be when no one is there to answer questions :)
I've had my ball python for the past year & I'm still always watching enclosure videos to better the way I do things. I'm currently building a 5ft upgraded enclosure & have been watching alot of videos so this was definitely a help
Well we sell ball pythons … when you are ready let me know! 😊
@scalezreptiles1813 after I move my BP to the new enclosure I'm going to be in the market for a gargoyle gecko or a crocodile skink to put in the 40gal tank. Not sure which
So you’d know putting a 70 watt heat bulb in a tank that small right in the middle is absolutely ridiculously stupid and asking for a dehydrated/toasted snake
@@Celticbhoys who are you speaking to, me or someone else?
@@secondsfromdisaster5360 you yes and the owner of the video
I’ve been wanting a ball python for years and I’m finally going to be living somewhere I can have one! I’ve been trying to find good educational videos and this is the BEST! Thank you so much for helping us snake newbies!
Hey Jocelyn! We have lots of AMAZING ball python babies available right now if you are still looking. Hit me up! Either through Instagram @scalezreptiles or email zachpersin@hotmail.com
This was so helpful! I’m planning on getting a ball python for the first time after being a bearded dragon owner and there’s so much new reptile territory I’m running into! Thank you so much 🙏 🙏
We have some amazing ball pythons available right now if you are interested! Reach out on Instagram @scalezreptiles and I’m happy to help find you the perfect one 😊
DONT FOLLOW THIS GUIDE!!!!! Crazy how wrong this guy is. I’m trying my hardest not to seem like a bad person, I just care about snakes and this is just absurd
Thank you so much! This is exactly what I've been searching for! I've been struggling with my humidity and my girl is in shed.
Soo glad I could help! :)
The thermostat you recommended is nice. I’ve been using it for a while. Thanks for this video!
I used aluminum foil and it worked hood to hold in heat! Also I added a Tupperware and put Moss in it and that was my snakes humanity box. Good she’d every time. But I like how you explain everything.
If anyone doesn’t want to buy a brand new tank I always suggest looking at second hand tanks first, sometimes people even give them away for free and I got a 75 gallon tank last year for free off Facebook market place.
I was stressing so bad trying ti find a video that hit all of these points. You did an AMAZING job explaining and going into detail, it's a lot more required than many others show and you show that. So thank you for that! instant sub!!
My pleasure!! :) thanks for the nice comment
I once had a little lobster that pushed the lid of the tank. The day after it even pushed the lid with a stack of books on it. A strong snake could definitely do it!
Funny thing was; he just went for a walk around my bedroom, only to jump back in his tank after he finished his patrols. One time I woke up and he was staring at me, sitting on my alarm clock. One crazy lobster haha.
Really appreciate this video. You were very specific with everything and answered all my questions that I had. Thank you.
Does the heating pad also heat up the surface underneath the tank? Could it burn or melt surfaces under the tank?
@@AnaBanksxo if you buy a quality heat pad, and have it on a thermostat that is correctly installed with the probe in the right spot, it is very unlikely of anything like that to happen. However I have seen things like towel burns that were under the tank and under the heat pad that was not plugged into a thermostat so be careful! 😊
Thanks for the tips! Sometimes I worry about over-misting my snake because the vet said he had a small fungal infection that could have resulted from over-misting.
Yeah it’s a real problem! You never want to mist directly on the snake, ever. That can cause sickness. The bedding should just be somewhat damp. Nothing crazy
All you need is a rack system or just plain tubs with drill holes in them for air. And a thermostat. Well plus the heating Source pastil that's the easiest part. The hardest part of taking care of a snake is the setup. After that as long as you know what you are doing, your snake will have an easy life and so you will because it doesn't cost you much money after that
Thank you so much! This is EXACTLY what I needed ❣️
My pleasure!! 😁
I been doing a little reasearch on pythons lately. Im not sure they seem expensive not only to buy the but to maintain them.
They can be as cheap as 75 bucks and the full setup can be found on Craigslist for 100 to 150 ish. I wouldn’t say too expensive when you think about some reptiles costing in the thousands. If you are ready to get one let me know! We have some great options right now and I’ll hook you up nice. Our ball pythons range from 75 to 1ks so we definitely have variety! Feel free to reach out on @scalezreptiles
I 100% love ball pythons but since they get so big and their setup is also pretty big, i settled for getting a corn snake (will get one soon). I feel sad but I’m still gonna get a ball python as well! ❤
you explained everything so well. thak yoou so much !! this video helped me heaps
Thank you for the comment!! :)
Great info...cheers I appreciate it...🏴oh can I ask about ventilation?
I would not worry about ventilation honestly. Cover 80% of the top if you can with a towel or plywood or plexiglass is preferred. Then the remaining 20%
Of the top would be covered by heat lamps. They really don’t need much other ventilation
@scalezreptiles1813 thanQ for your reply, all very clear.....I think I'm overthinking...I tend to do that when my hobby means a wee life depends on me.....cheers..🥃.I'm going to binge watch your channel later.🏴
Great video! I’m a little confused about the thermostat part. For the BN link thermostat, I can plug in the heat pad to that one as shown in video?
What temperature do you keep the thermostat at ??
It’s more about the temps reading in the enclosure. Not necessarily on the thermostat. For ball pythons the hot spot should be 91ish +\- and cold side around 78 to 80
The probe should go between the glass and the heat mat.
Can you layer the hides with the larger over the smaller to allow more hiding spots ?
Sure! That sounds like a good idea as long as there is enough floor space within each hide
This one video helped me so much 😭😩
How often do you change the eco earth
Have you tried reptile prime coco substrate by brian barczyk? I holds the most water and stay dry on touch for bp belly. I used repti-chip previously. It it relatively more difficult to do spot cleaning with repti-chip compared to reptiprime.
I got a baby ball and used a 55 gal fish aquarium. I never had issues heating the tank. I named him “hebi” Japanese for snake and he is beautiful and big!! Super fun and has a great personality. Never had issues with feeding and he has never refused food. Transition from frozen mouse to frozen rat was easy as can be. No problems with shedding or anything else. Im learning everything as I go. I do have a question tho! He got out for the first time the other night and I found him I the hallway just chillen looking at me lol so I added a paint can on each side of the tank, there is a clip on either side, shoebox in the middle full of cards, 1 gal water bottle on the side as well. How can I secure the top better?
I highly recommend you use a slide top enclosure (slides left to right and click in place) not one that just pops up when the snake pushes. Those are really not made for snakes. Glad your snake is doing well!
@@scalezreptiles1813 I have been looking for one but have been unsuccessful.. I have a 55gal aquarium tank that at one point was our fish tank until I upgraded my wife to the 75 gal she has now. When I him petsmart did not have a 55gal cover so I had to buy 2 40gal (I believe it’s a 40) screens and they fit perfectly. In the middle I had to bend the edge of the screen lip to make it flat. I have 3 cage clips for the back of the tank on each screen next to the wall side, I also have another clip right in the middle of the tank on each screen. Today I went to the hardware store and got 4in wide heavy duty velcro and attached that to either side of my tank and another 4in peace on the front of tank in the middle of each screens I can now practically lift my tank by the screens, if he gets out of that I shouldn’t be a snake owner lol. If you come across the screen you are talking about for my tank size please let me know
Buy lid clips. Six in total. Two for each long side and one for each short side.
This video was great, hit every point. The only question i have is approximately how long will this set up last for before he/she out grows it?
Thank you! It really depends on how often you are feeding your little one. I know some people who feed twice a week while they are growing. So in that cage it would only last about 6 months tops. In other cases where they feed 1 time per week + it could last you a year.
“Since we all know you’re going to get a second ball python” so true
Thank you very much this video was very helpful. I am looking for a ball python it will be my first one As a pet. Looking forward to it . By no means I am looking to breed is not my thing.
We have some amazing choices right now! If you’d like to send me an email we can connect and see if we can find you one that fits your wants! :) zachpersin@hotmail.com
Wouldn’t you worry about a snake potentially moving the thermostat probe/wrapping themselves up in the foil (extremely sticky and sharp) tape if they decide to burrow?
It’s a great question but honestly with good tape and done properly I have never had that issue. But that’s just my opinion :)
Would that heating pad cause a fire bn on like that?
Nope not in my experience.
dont put tape in the tank unless you want your snake to get stuck or hurt
How do you make the top to keep it in
Do you have to do this for Adult Ball Pythons as well or do you have another video for that?
Great explanation very thorough
I just wouldn’t recommend a glass enclosure for adult or a baby but if that’s all you have it can definitely work. Otherwise, the explanation in this video works the same for adults :)
Job well done 👍
Do I need a drainage layer?
Nope, you don’t need one with ball pythons. If you see a buildup of water you are over misting by A LOT! Should just be lightly damp.
@@scalezreptiles1813 thank you for the reply. I just put my new ball python in it's enclosure. I'm just having a hard time keeping the basking side at a steady 90 95 degrees. Im also using a circulating fan in the room to keep the humidity down
@@wizzleman5597 why the fan? Why would you want the humidity down? I would immediately stop using that fan
@@scalezreptiles1813 I was using the fan because the humidity in that room gets to around 80 percent and I heard that is to high. What do you recommend?
@@wizzleman5597 why is the humidity 80% in the room? Where do you live?
where do u get the temp gun can you send a link pls
How long (in inches) is the hide you used roughly? Do they come with sizing or is it just a guess?
It’s just a guess. But I would say for a baby anything from 6 to 12 inches is great
Can I get a link to the heating pad regulator thing?
www.amazon.com/Century-Thermostat-Controller-Germination-40-108°F/dp/B01I15S6OM/ref=mp_s_a_1_1_sspa?crid=3MEN4QPN0KQCR&keywords=reptile+thermostat&qid=1653514826&sprefix=reptile+%2Caps%2C116&sr=8-1-spons&psc=1&smid=AARY1ZSUT9VPR&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFKTUMzNEhHU0E2M0smZW5jcnlwdGVkSWQ9QTA4ODcwMDIxNjk3SzZUUUEzNjJTJmVuY3J5cHRlZEFkSWQ9QTAwODI1MzAyUFBLVEVOM1BMSzY1JndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
There's one thing I don't get, why a Heat mat and a CHE bulb? I ask because people in fb groups are saying to ditch the heat mat and to just use a CHE bulb instead. They have these big wooden vivs with just a CHE for heat. I'm so confused? Love the video, so detailed, thank you.
I'm beginning to think a lot of these groups are overcomplicating things for the sake of "perfection" but it's only creating more confusion. I've been pretty confused myself but I'm starting to gather that there's realistically no one way to do it. If you want to run a heat mat, do it. If you want a CHE, use a CHE. But I'm also seeing UVB, DHP, etc being recommended as well. It's tough for me to pick because I bought just a regular heat lamp from zoo med and one of their bulbs. I'm probably gonna use it and monitor temps to make sure it stays consistent. If it doesn't work out, I'll probably go with a CHE.
@@M45T3R_B8ER you nailed it!! Exactly, too much info and looking for perfection. My comment was a moth ago. Since then I'm just using a 100w CHE bulb in a wooden vivarium. That's it. Humidity and heat is perfect.
@@M45T3R_B8ER Seriously. I'm so frustrated I've literally considered giving this adorable ball python back to the neighbors that didn't want it anymore. I know I've vastly improved his living situation, but those forums (Reddit and FB) have made me absolutely crazy with second guessing, buying stuff, sending stuff back, wasting money and time trying to achieve BP Nirvana. He came to me with a heat mat and a 150 watt Zilla day white bulb on no thermostat, in the middle of the tank with no decor. I'm now running a DHP on a thermostat, heat mat on a thermostat, and a Forest Dweller UVB bulb. Being told I ALSO need a halogen spot, also on a thermostat, ditch the UTH, and I MUST have wifi enabled hygrometers/thermometers to remotely monitor conditions. Sheeeeeeesh.
Can you give me a link for the reptisoil? Many come up and I’m not sure which one to get :))
www.petco.com/shop/en/petcostore/product/zoo-med-reptisoil-10-qt-3424749?cm_mmc=PSH%7CGGL%7CCAL%7CSBU05%7CSH13%7C0%7C9tmUKD5hTskndYP9WVkGs9%7C58700007475749267%7CPRODUCT_GROUP%7C0%7C0%7Cpla-1455900004510%7C129523121496%7C15114789014&gbraid=0AAAAAD97F156FPFH6r0GZUM-b6trDItFO&gbraid=0AAAAAD97F156FPFH6r0GZUM-b6trDItFO&gclid=Cj0KCQjwqPGUBhDwARIsANNwjV41rsHSILOFAnBI7tn3SUxUTBKjKrYEy6es-6zuVys4-LSLOHhW3BgaAtDVEALw_wcB&gclsrc=aw.ds
What color light can it be?
Honestly these snakes don’t use UVB and really don’t need a specific light color so whatever your heart desires will work! 😊
The lights should be white, not coloured. And UVB is very beneficial for them.
@@nightinggale6470 yeah
@@scalezreptiles1813 That’s not correct. We have evolved our knowledge in the reptile community and now know that a shade dwelling uvb light is beneficial for ball pythons.
I recommend Arcadia Shade Dweller Pro for light/uvb cycle. 12hr on, 12hr off.
Can you use electrical tape to tape the prob on the glass?
Do you have an adult setup video?
I don’t at the moment but you can basically use everything I said in this video just on a larger scale. So I’d say at least 40 gallon tank or larger. Preferably pvc or something non glass. If you have to use glass it’s Okay just cover the top to keep in heat and humidity
@@scalezreptiles1813 any recommendations on brands?
40 gallons is too small for an adult ball python, the enclosure should be at least as long as the snake. They need a 4x2x2’ enclosure or larger.
@@thecrazyadventurist5796 boamaster, but really most of them are similar
Much prefer wooden enclosures retains heat better.....
Did you just recommend that new owners _not_ track the temperature and humidity with gauges? There's nothing wrong with newbies keeping track of such things. Especially given that quite a few will not follow your instructions perfectly. Also, different regions have different relative humidity, so that can make a difference in the tank - as well as the temperature people keep their houses. The gauges can let people know when something is wrong _before_ it screws up a shed, causes an URI, or makes them go off feed.
Thanks for your comment Charles. I definitely recommend people track the temperatures using gauges. It’s the humidity gauges that I do not believe are necessary and most of the time I believe people rely on them too much and in turn cause RIs because it’s reading 50% humidity (when in reality it’s 90%) so they keep getting it more and more wet. I understand people live in different regions and relative air humidity is different. But if you follow my general rules of thumb you will be completely fine for ball pythons. Covering the top of the enclosure is key. And keeping the substrate lightly damp by spraying a couple times a week is all that’s needed
What about using uvb light for daytime light ??
Awsome very good video. Ty!
hey how's it going? greetings from Brazil. Could you explain the measurements to me? Because around here we don't say "10 or 20 gallons", so I don't understand kkkkk, thanks.
Lol it’s about 2 foot long and one foot wide or so. But definitely check google and see if you can find better measurements for a 20 gallon :)
Someone said I can use aspen bedding is that true? If so how is that as far as spraying for moisture?
Hey Kellie! Thanks for the comment. Definitely do not use aspen bedding. You will run into horrible shedding problems with your snake.
Coconut fiber is cheap and can hold humidity well but also holds bacteria as well and as the tendency to get stuck in a ball python’s heat pits and if consume can cause impaction
Your better off going with mixture of 40% topsoil 40% zoo med repti soil and 20% playsand substrate should be about 4 in deep
Ball pythons are shy creatures so covering up three sides of the enclosure will help your snake feel more secure comfortable and confident in it's enclosure
No.
@@nigelsreptarachnids5931 yes
@@doit4chicago25 I find this whole comment to be misinformation. Why mislead the entire reptile community because of pride??
Do you have any links to back up your claims?? Coconut husk and fiber is by far the best substrate for ball pythons, and it’s agreed upon by most of us in the community after many years of raising snakes.
@@nigelsreptarachnids5931 the only misinformation is the one you're spreading and misleading the reptile community
Tell were in Africa can you find coconut fiber or coconut husk substrate
I’ve never had any issue with cocofiber
My probe says to not get it wet, so I have attached them to where they are under the hide and just above the substrate on the side of the tank. All seems to be going well, but CAN I attach it to the bottom with it touching the damp substrate then? I also have the 10-20 gal pads for the 20 gal tanks along the back edge lengthwise because the 30-40 gal pads wouldn’t fit width wise. They spend the majority of their time on the cool side in their hides, and I have the electronic probes adjusting the heat accordingly so I know the temps are good. And yes, I’m checking with the temp gun like we talked about. So did yours fit width wise fully on the glass without any issues? Thanks Zack! Great video btw 🤗
It did actually seem to fit lengthwise. It may have stuck out less than an inch but ultimately did the trick of covering 1/3 the cage. And yes, I’d say you can put the probe under the soil on the glass. I do it all the time with those thermostats. I think it meant more so not to put water on it directly like spraying it, because it can then read the temp of the water versus the hot spot on the glass.
Put it on the glass and silicone it down so it can't get wet and it can only read the glass temp?
This setup is actually really bad.
Don’t use fine substrate.
Don’t put the probe on the base.
Don’t put tape in the enclosure.
The second hide is not even a hide.
40gal is minimum size.
You need the thermometers and hydrometers.
Put the CHE above warm side.
Please don’t follow this!
NEVER put any form of tape inside a snake enclosure. Literally one of the first things anyone ever told me before I bought a snake. Literally common sense
What? 😂 You can use certain types of tape just fine.
Take it eaaaaaaaaaassssyyy on the man guys… jeeez
Hahah thank you!! 😜
This is absolutely ridiculous? A 70watt heat lamp right in the middle? Absolutely no escape from the warmth. Both sides are going to be atleast 27c dunno what that is in F. genuinely shocked by this video, so wrong it’s unbelievable
@JuniorJohnson-jo7evdon’t stress, as long as the enclosure is around as long as the snake, a bit of humidity, and like you said a hot and cold side, I have 2 thermometers one on each side of the tank because imma helicopter snake parent, but they’re tough, a small issue won’t permanently harm your snake, maybe mild discomfort on both of you, but you’re good 💪🐍
Wait how do you know the heating is accurate to the heat in your room
Not really sure I understand the question?
I have that big hide!! (But large ball) lol
I def dont agree with you 100%, but as others have said u def went over alot, and i dont see anything outrageously bad. Just things i would do differently, as in the substrate. 40-50 watt Che's arent powerful enough, u really need 60-75 watt as u said to get the ambient good. Also many thermostats aren't designed to work with Che's, so make sure the one u get will if thats its intended purpose. Also put the che on the hot side to get a better temperature gradient... especially in a 20 gallon. Way easier to mix ur substate before u put everything in the tank 😊
Geez this is a lot I didn’t think it was all this to keep a reptile 🐍 I might as well buy a dog! I have known other owners who just had a heat rock and a towel and their snake lives still to this day
Only problem with heat rock is that they are can burn the belly of a snake!
Hi looking for a ball python if you have any for sale can you please send me a listing on what you have thank you .
Hey Ronald! Thanks so much reaching out. Please email me directly at zachpersin@hotmail.com and I’m happy to chat more about that! :)
You and wicken are legit twins or something
Putting the probe inside is not a great idea. All you do is put it in between the heat mat and the bottom of the tank. Yes, it will read hotter than the actual area inside the tank, but that’s why you set it a few degrees higher than the temp you want, and make sure the temp inside is correct with a temp gun.
That idea works great as well! I was just sharing what I have done and been very successful with. But I appreciate the alternate ideas.
thanks alot
I want a ball python but my parents wont let me get a snake but they let me get a leopard gecko.
Tape inside the aquarium is not a great idea. The snake will eventually get the tape loose and get stuck in it. If you want to run the thermostat line inside the tank, you should use a non-toxic silicone caulking to secure it and make sure it dries completely before putting anything in. If the snake manages to break that loose, then you don't have to worry about it getting stuck and injured by the tape.
Thanks for the idea Joel! Appreciate the comment
Everything was great but you lost me with taping the thermostat inside the actual enclosure. That probe should be taped sandwiched between the glass and the heat mat outside the enclosure. There should be no tape inside the tank.
Yeah I agree with you. However sooo many people don’t purchase temp
Guns and then don’t actually have the temps right because the probe is outside the cage. So the temps run too low and people don’t adjust for that difference in temps. But I do agree, if you adjust for that, it’s better to put the probe outside the cage
I was going to bash this guy for shooting a video with ADMITTEDLY incorrect props (wrong type of screen top, unrecommended kind of thermostat, wrong kind of tape). If you’re going to shoot a video, make sure you have the correct props BEFORE you shoot. I know he’s just trying to educate noobs, so I’ll let all that slide. Something I can’t let slide, you never, ever, EVER, EVER use tape, of any kind, inside of a snake enclosure. It’s a recipe for disaster. Place the probe between the UTH and the glass, outside of the enclosure. Tape inside the enclosure, NEVER EVER!
20 gallon, transparent glass aquarium and a screen top are both pretty bad ideas for any snake, let alone ball Pythons...
Yep, I would agree! The problem is a huge percentage of new snake owners purchase glass enclosures from petco or petsmart and then struggle to get the environment right. Typically wooden or pvc enclosures can be a bit more expensive so some people can’t afford it. So this video is just to help out in the case someone got a glass enclosure is all! :)
This guy talks alot
Haha thanks! My goal was as much info as possible ;)
Looking to get my ball python soon and I was wondering do you have a instagram account so I can show you stuff I plan on getting for my set up??
We sell ball pythons actually if you are interested?? :) I’d love to help find you the perfect snake! @scalezreptiles
nature doesn’t have heat mats, and temperatures underground tend to be *cooler* than temperatures on the surface, not warmer. So I don't whats the point in the adding a heat mat when you already have a overhead heat source
🤦🏻
@@4hounds2humans1van5 😂🤣
@@4hounds2humans1van5 my sentiments exactly. This guy is going around these comment sections acting like he knows what he’s talking about but probably just got his first snake a couple years ago. 😆
His pride is too strong for him to actually learn something from those of us that have been doing it for probably as long as he’s been alive.
The wild ones have a ground which retains heat from the day throughout the night