DIY Carbon Fiber Steering Wheel Mercedes Production PART 1
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2024
- -Self made Carbon steering wheel in Carbon restoration part 1
If you have ideas what we can do next, write it please in the comments👍🏼
and don't forget give a 👍🏼.
Thanks.
videos of production coming soon, so give a abo and like to see more in near future, thanks 👍🏼
▬Recommended Equipment ▬▬▬▬▬▬▬▬▬▬▬▬▬
🪚Mirka DEROS 650CV Exzenter: amzn.to/3SPV4x8
🪚Mirka Abranet P80 Ø 150 mm :
amzn.to/3SPV4x8
(Bei den Links handelt es sich um bezahlte Affiliate-Links. Dir entstehen dadurch keine Zusatzkosten.)
▬ More Videos ▬▬▬▬▬▬▬▬▬▬▬▬
Carbon Fiber other Projekt, Carbon fiber
steering wheel how its make in this video : m.youtube.com/.... m.youtube.com/....
#carbon
#carbonfiber
#carbon_fiber
#carbonnation
#carbonparts
#carbonsteeringwheel
#Carbon diy
#carbon fiber
#carbon fiber skinning
#carbon fiber steering wheel
#diy projects
#how to make
#how its made
#carbon skinning
• DIY Carbon Fiber Steer...
• DIY Carbon fiber car p...
![How to Make a Carbon Fiber Steering Wheel with Epoxy Resin [DIY]](http://i.ytimg.com/vi/UDsZsFJ1ai8/mqdefault.jpg)
![How to Make a Carbon Fiber Steering Wheel with Epoxy Resin [DIY]](/img/tr.png)
Amazing video. I tried to do a steering wheel but I really struggled with overlapping the carbon fiber at the back. If you could show more in detail how you do it, it would be great. Awesome work, congratulations!
Hi,
Ok, i Will coming soon new videos, by the next steering wheel I will show it better 👍🏻
What is the time required to transform a Mercedes steering wheel from the standard version to the carbon fibre version ?
Have you had any delamination from the heat?
Hi, no never any problems
Thank you for the response. I really like that finish, because I have tried many carbon fibres and really struggling with distortion in the fibres which looks really bad when epoxy is applied. Do you have any suggestions for me? And is that 245g twill weave? Apologies for many questions, just trying to learn from someone who is really good
struggling with distortion happen quickly, it's just practice. but i recommend starting with light parts, for example interior moldings, then mirror caps. You need a lot of experience for a steering wheel because the shape is complex. in the future there will be more videos with many different parts 👍🏼
Hello! What transparent liquid do you impregnate the carbon after gluing it to the part? Thank you!
Epoxy resin
Привет! Расскажи как делаешь стык карбона на руле? Интересно увидеть твой метод.спасибо.
Hi, it will be coming soon new videos with steering wheels, I would be show it better next time 👍🏻
Wow
What is the type of glue (black) that was put on the steering wheel so that the carbon fibers are stuck to it?
It is glue for leather, same which you can use for steeringwheel leather. I am put a little bit black Color in the glue
Was that spray glue to stick it down first? Iv done a few
Try polyester resin first to help stick down Then normal epoxy resin after. Definitely works I had one where the glue felt like it came off so was like a tube in the end lol
Hi, yes at first hight Temperatur resistant 2 component glue.
I don’t like the Methode with the polyester resin. You have there a lot problem with high temperature. A at next the epoxy resin don’t work good with polyester. You must it sanding every time between the layers an best use a special prime. But after all it you have still the problem with first glue layer. It will be work in normal Temperatur country’s but if you have. 40 degree or more on the summer the parts will be damage
What did you use of carbon fiber? Its like there is already glue on it?
Hello, no we spray it on the Carbon and parts
@@CARBONART. what glue did u use?
@@wafuasy7147 a 2 component high temperature resistant glue
@@CARBONART.Can you give me a link to the glue?
I’m just doing another one with chopped carbon
Forged is cool but a lot of work 😵💫
What is the carbon fibre you are using? Would really appreciate a response, looks amazing good work!
Hello, thank you. It is a Standard 245gr/qm Carbon Fiber
Я нижнюю часть делаю из трех кусков
Part 2?
Hi, I think end of this week.