In this video I run through what is need to get this Ebay intake manifold ready for installation If you have any questions, let me know in the comments! Also please subscribe for more content like this
Quality looks to the same as the S2 ultra street mani I got, ended up porting/polishing it to help remove the access material/casting marks left in the ports
You would be shocked what they look like inside if you cut it open. They might look good from the outside but the casting on the inside is absolutely horrendous!
@damonryn if you know someone who can tig alloy then cut the bottom open and clean the inside up with a die grinder then weld the section back on. Seen a video of a guy comparing one to a skunk manifold and wondered why it flowed so bad so cut it open to see why. The casting was so inconsistent. Dags everywhere. Wasnt to bad after he cleaned it up. He also milled the gasket surface cos it was warped real bad and leaked when he first bolted it on.
Thanks for sharing looks halfway decent for what you pay!
Good sh!t. I just bought a k24a3 & 6spd for my dc4. Researching/collecting parts. Def be following this build. Cheers ✌️😎
Appreciate it brother, happy to help with any questions too
When portin use 70 %alcohol and liquid hand soap mix. Makes porting way faster
Quality looks to the same as the S2 ultra street mani I got, ended up porting/polishing it to help remove the access material/casting marks left in the ports
Looks great slowly coming along
nice work bro.🤜🏽🤛🏻💯🔥
theyre skunk 2 manifold without the badge. s2 will buy them thro the badge on and resell it
its all from china
How much mm i need to open the inyector hole?
I believe it’s a 14mm, the aluminium it quite grippy so watch out
You would be shocked what they look like inside if you cut it open. They might look good from the outside but the casting on the inside is absolutely horrendous!
Yeah ok, I’m on a budget so got no choice
@damonryn if you know someone who can tig alloy then cut the bottom open and clean the inside up with a die grinder then weld the section back on. Seen a video of a guy comparing one to a skunk manifold and wondered why it flowed so bad so cut it open to see why. The casting was so inconsistent. Dags everywhere. Wasnt to bad after he cleaned it up. He also milled the gasket surface cos it was warped real bad and leaked when he first bolted it on.