SILVERADO 5.3 GETS A 102MM INTAKE MANIFOLD & MORE!!
ฝัง
- เผยแพร่เมื่อ 18 ก.ย. 2022
- Here my 2000 Chevy Silverado 5.3 LM7 gets a 102mm Intake Manifold installed as well as a Fuel pressure regulator with PTFE e85 hoses.
#Silverado #cammed #e85 #f150 #5.3 #4.8 #takuache #fordlightning #truck #trucks #mustang #lsswap #5.3 #4.8 #droppedtruck #slammed #silveradoss #chevy #chevorlet #ford #hemi #srt - บันเทิง
I love that everytime you use silicone you say "for a little extra security" 😂😂 instead of what its actually doing which is sealing moisture out
it just feels reassuring saying that ! 😂😂
Bro love the videos ! Love it brother cant wait to see the finish tune!!!!
Really appreciate it bro! Lots more coming !
This is a dope build!
thanks bro more coming soon!
I just got this intake manifold off Amazon and want to say thank you for making this video because I was about ready to return it thinking I couldn't put it on my 05 Yukon Denali 6.0 which has electronic throttle body which making a cable drive won't be too difficult, now I know how to install this and I wasn't aware of the e85 sensor or the regulator I'll see if I can get those off Amazon as well
Love your video !!
Thank you!!
That was a good vid bro, subd
We Appreciate the support bro 🙏, stayed tuned for future vids!!
I'd love to know the results of the swap. Great video
Flush that brake fliud!
Intake looks so dope bro
thank you bro 🫡
Nice video
thank you ! 💪
For anyone installing new knock sensors in their vortec. Torque spec on them is only 10 ftlbs. Do not torque to 15 lol
Awesome build bro ! I’m doing the same setup, what wire harness did you use ?
yessir appreciate it my guy fr! 🔥🫡 harness for the injectors?
@@ErikRose_ for the motor, also injectors
💯💪🏿
I’m almost done with my build bro last thing is what size was ur vaccum hose for your regulator and the size for your PCV line, and what was the little snap on thingy called
We use 1/8 vacuum line but will probably switch to 3/16 because 1/8 was a little tight but still worked with some persuasion. As for the PCV line I think it was 3/8 line but would need to double check but almost sure that’s it. As for the snap on thing are talking about the e85 sensor or the fuel line fitting?
Badass build ! I got the same truck and I installed the same intake manifold, at what psi did you set the fuel pressure regulator?
Appreciate my guy! I have mine set at 58 for idle that’s what I’ve heard is suggested, so far so good !
Thanks for the reply bro! Love the videos
I hope this ain't a stupid question but do you need the e85 sensor I'm new too all this
@@thekingofnoobs8362 not at all my guy! The sensor is only needed if you plan on tuning for the truck to accept both 91 pump gas and e85, if you tune the truck only on e85 the sensor is not needed!
@ErikRose_ one more question what happens to the evap purge valve on top
Whe you add that jegs intake. To you need to program anything on the truck. Or just install as normal
no programming just a simple install 👌
I’m still stuck installing bro my last few things is how’d you do it with your EVapor canister and your EGR line tube, I’m having trouble with them I don’t know what to do with them
Unfortunately, you can’t run those on this manifold. I just deleted them and having the tuner tune them out. There might be a way to do it but will require fabrication.
What did you do with the MAP sensor? I see that you removed it but did you use the port on the back?
Yes we were using the one in the back !
Did you have any issues with the fuel rail mounts? I got this same intake for the 5.3 I built for my sons 85, running the multitech 2 injectors, I had to heavily modify the fuel rail brackets.
Yeah, my mounts didn’t work with my injectors either had to make completely new ones..
Badass video I just got this intake manifold and I'm getting ready to put it on my 05 Yukon Denali and I was about ready to return it until I seen this video so thank you where do I get to eat 85 sensor and where did you get the regulator my s***'s from Amazon
Appreciate it brother, I got mine e85 sensor from eBay I think and got my fuel pressure regulator from eBay as well just a cheap one two but it’s been working great. And you don’t really need the e85 sensor unless you plan on running e85.
U could have just drilled holes lower on the original fuel rail bracket and cut excess off
did you delete the big ol emission pump or w.e that's on the left side of the engine bay ? link to the e85 sensor ?
yessir deleted it and had my tuner tune it out!
Heres the link to the sensor I got!
ACDelco 13577429 GM Original Equipment Flex Fuel Sensor a.co/d/5qzyJVc
Can you slide the link for all the parts you used? Following your build I’m trying to get my 5.3 running on e85 already
I gotchu bro full list for what i did on mine for e85! These are exact links of what I bought.
Fuel Pressure Regulator : www.ebay.com/itm/293098256458?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VSwMTnaKQMa&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY
E85 Fuel Pump : www.ebay.com/itm/184033790153?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=YFsJgTc4R8q&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY
E85 fuel filter: www.ebay.com/itm/353786252312?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ckmxfmmqtas&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY
PTFE Fuel Line : EVIL ENERGY 6AN PTFE Fuel Line... www.amazon.com/dp/B07JFPXHB2?ref=ppx_pop_mob_ap_share
E85 Flex Fuel Sensor: ACDelco 13577429 GM Original... www.amazon.com/dp/B01GQR9C5O?ref=ppx_pop_mob_ap_share
E85 Sensor Connector: For GM E85 Flex Fuel Sensor... www.amazon.com/dp/B07115TSNK?ref=ppx_pop_mob_ap_share
E85 Quick-Disconnect Female Push-On EFI Fitting : EVIL ENERGY 6AN Male to 3/8" SAE Quick-Disconnect Female Push-On EFI Fitting a.co/d/6y8j7sV
And you’ll need AN6 fittings to connect all your PTFE hoses, that’ll differ depending on how you route your hoses. I got mine on Amazon as well. Thats Everything.
Yo bro did those adapter wires come with the injectors? If not where can i get some
yessir! they come together most from the lsxceleration website come complete!
Richard holdner makes 350 ish stock w just headers, he makes over 400 w cam only bout to upgrade my c10 5.3 swap
Nice! yeah i think 5.3s are slept on they get the power down pretty good!
Did you take motor out to put cam in , I’m ls swapping and eventually I plan on putting some power to it .
No i actually made a video on putting in the cam if you want to check it out !
@@ErikRose_ will do
Ummm, Cathedral Port heads??
Long shot but did you have a whistling noise coming from this intake? Is there any way to fix it? Thinking about going back to my original bc of this.
Yes! These intakes are known to be loud! You can use Dynamat or something to quiet it down even just something on top of it helps, use your hand see how that changes the sound! 👌
What's up bud love the truck was wondering if u could let me know the part number of the injector kit u bought
Thanks man, Appreciate the support. No problem I’m sure it was these. www.lsxceleration.com/delphi-35lb-hr-2000-07-ls-truck-injectors-56010-320-8-d/
Thanks a bunch bud
I know the founder of AUS injection personally, awesome guy!
Thats dope bro! These injectors are great! Tell him to keep doing his thing.
You took the time to clean the valley plate, should’ve painted it to protect it buddy 😮😅✌️
Ehh gonna do another rebuild when I turbo it down the line ! 💪
how is paint gonna protect an aluminum piece? I could see if it was steel you can protect from rust but what value is it gonna have on aluminum besides cosmetic?
Its been there all these years unpainted, it’ll be fine lmao
Shiiiii just finished a L87 Stroker from the block. 10 months! Ridiculous! And the cost so far? Almost 30. All my labor. All made in the US 6.8 liter. 1000HP
Where did you get the 180 for the fuel rails?
you can get them on amazon bro ! An6 180 !
Badass informative video bro! How’d you run the throttle cables?
I made a custom bracket that bolted right onto the throttle body, but they do also sell ones that fit those throttle bodies too perfectly!
@@ErikRose_ appreciate the reply! I’ll see if I can find one, did you see them on Amazon or a specific website/brand?
@@daniellozano289 Here’s one on Amazon! I think they have the same one on ebay too!
Woopeey 4-Bolt Throttle Cable Bracket for LS LSX LS1 LS2 LS3 LS6 LS7 Intake 92mm to 102mm a.co/d/299loBU
Badass bro planning on doing same thing do you have the link for the injectors ?if so can u send it plz
Hell yeah get it done my boy, I gotchu with the link!
www.lsxceleration.com/delphi-35lb-hr-ls3-ls7-fuel-injectors-d56010-320-8-0/
Dude talking like he’s doing the work while watching someone do literally everything for him🤣🤣
The stock intake manifold on these 4.8 5.3 proven to flow more hp and tq over eBay and Amazon fabricated intakes other than that your buddy done a good job doing the swap on your truck though
Yeah i’ve heard 50/50 on these intakes I plan on boosting tho that’s why im sticking with this one! maybe a tbss later!
They put a square port intake on a cathedral port head 😂😂😂 nevermind that it’s cheap ebay crap, the intake to head flow is going to be turbulent AF 😂
@@plugBONEis it bad new here sorry lol
@@plugBONEthe o ring is rectangular but the port is cathedral….but still those sheet metal intakes are 🗑️ on N/A
I would have gone with 6.2 intake manifold
whats the electronic sensor looking doo dad on the line in to the pressure regulator?
that sir is an E85 flex fuel sensor, not required for the fuel pressure regulator just something I added for tuning later.
@@ErikRose_ thanks!
So what do you use in place for the e-85 sensor if you’re not going e-85 yet?
@@moycorral7870 probably just run the line as you would but without the sensor
No gasket befor the manefold is Crazy
Gaskets are installed on the intake they are like o-rings
Is that the dude from LC Performance then went to Limi713SS ?
Nahh lol, that’s my brother 😂. They’re in Texas we’re in California..
Did u get factory or aftermarket fuel injectors?
Yessir! 35lbs AUS injectors
@ErikRose_ ok I didn't know if I could use factory or I had to go aftermarket thank for the help
All this comes with the kit or you have to buy separately?
It comes with intake manifold, fuel rails, brackets, and fuel line to the rails with fittings.
What fuel pressure regulator did you use?
An ebay one for the time being! So far its working great! Heres the link for the one I got!
www.ebay.com/itm/293098256458?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VSwMTnaKQMa&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY
Where’d you get those front rims at
I actually got them off some guy from offer up lol
Did you mount square port to cathedral head with no adapter?
My kit came with the gaskets that give the ports a good seal ! so you can either of the two adapter or gaskets.
@@ErikRose_ I just spent $217 on adapter. Gonna return it now
@@ErikRose_ I have same seals.
@@fmrperformance7774 what manifold do you have?
@Erik Rose chrome version of yours.
Do the stock injectors work I heard that they are to short to run
I honestly couldn’t tell you, we went right into some aftermarket injectors. They looked similar in size though, but I would need to double check.
Where did you get the E-85
Here in LA bro we got E85 everywhere but I get mine from a Chevron
Bracket was to tall cause it's designed to have the spacers for the manifold like it says on the listing on Amazon
link for the fuel regulator
Where’d you get your fuel pressure regulator bro?
Its just a basic ebay one bro for $50 ! haven’t had any issues with it so far !
@@ErikRose_ could you link it bro, I’ve been tryna find it for a min your video has helped me throughout my installation too💯
@@geraldr9562 yessir i gotchu bro ! this the exact one i got
www.ebay.com/itm/293098256458?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VSwMTnaKQMa&sssrc=2349624&ssuid=&widget_ver=artemis&media=COPY
Did the throttle cable give you issues?
Just had to get a new bracket to make it functional.
@@ErikRose_ do you have the link of which bracket you used
What wheels you got at the front??
I think they’re pro comp wheels, they’re 17inch and used for 4x4 builds but i only used them to clear the lowering spindles !
You made your truck slower, congrats. 😂
It has a trailblazer ss manifold now! 👌
Does it really make it slower?
@@Leo_bruhh fuck yes
Absolutely.
What quick-connect’s did you get? Are they the same size or different?
Here the link to the quick connect i used! and yes same size!
EVIL ENERGY 6AN Male to 3/8" SAE Quick-Disconnect Female Push-On EFI Fitting a.co/d/7iZegC7
@@ErikRose_ thanks bro appreciate it going somewhat same way on a build of mine
How did you install the map bro?
Put it on the back of the intake manifold connected to a hose that goes underneath the manifold
The knock sensor harness was plugged in the wrong sensors
They are tuned out anyways lol
Did you delete the purge valve?
Yes it is deleted
Where did you get the throttle body from?? Can you send the link?
Yessir I gotchu! This the exact one I bought!
LineRacing 102MM Throttle Body for Chevy GM Gen III LS1 LS2 LS3 LS6 LS7 SX LS LSX 4 CNC Bolt (Black, 102mm) a.co/d/7meQJD3
@@ErikRose_ thanks appreciate it
@@ErikRose_ do you have the link to that intake....
@@robertchalk8193 yessir there you go!
Top10 Racing Intake Manifold with Fuel rail fit 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black a.co/d/iFRc10U
Csn you drop link to fuel injectors
yes gotchu bro!
www.lsxceleration.com/delphi-35lb-hr-ls3-ls7-fuel-injectors-d56010-320-8-0/
Do you have the linke for that intake manifold
Yessir! Heres the link to the one I got bro!
Top10 Racing Intake Manifold with Fuel rail fit 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black a.co/d/19sIHZz
What heads do u have on ur 5.3 ?
864 heads
What kind of injectors are you running ?
AUS Injectors 35lbs 👌
Is your motor ported or anything? Can you just bolt this on on a stop block ?
Motor is completely stock ! You can no problem !
Did it affect you negatively
nah no major differences really
Como se llama el kit del regulador de presión ?
Se llama AN6 Fuel Pressure Regulator lo compre en el ebay y hala bien aqui esta el link
www.ebay.com/itm/293098256458?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VSwMTnaKQMa&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY
What size is the brake booster line
I think it was 1/2 inch but not completely sure.
Where did you get your e85 kit bro?
I got the e85 sensor off of Amazon and the regulator as well.
Thanks bro is it universal or for Silverado?
Yes basically universal, you just need the get the pigtails and wire it into you computer and then get it tuned for the mix. You also need the necessary fittings to connect to your fuel lines. I think this is the one I have on mine if I remember correctly. ACDelco GM Original Equipment 13507128 Flex Fuel Sensor
I got a stock 5.3 wtf should I do to add more Power
Everything that i’ve done to my truck has been for power increases, Stage 2 Cam, Intake manifold, E85, and theres lots of other things you can do!
How did you put a 102 ? Rectangular ported on a triangle port head???
I noticed that too LOL it’s possible cause the square ports on the intake is larger than the cathedral ports on the cylinder heads making it able to work but there’s a big problem in doing this as it could cause a lot of turbulence but I think some have done it without any problems but using cheap eBay or Amazon fabricated intakes I don’t think anybody knows if it effects the turbulence and choke the cylinder heads or not
@@justinw523 port the head
This is where I'm stuck at the cathedral ported heads and the rectangular intake......does it work or what
So what’s the back holes for on the intake
I think it is for the map sensor but mine didn’t fit with my style. But might fit with the newer style with o-ring, but either way I didn’t need it just left it the plug in.
@@ErikRose_ ah ok thanks bro just doing lots of research on this intake rn
You can buy the ls3 map sensor, with the converter wire to plug in
Will this work on a vortec 5.3?
mine is a 5.3 !
where did you get the intake from
From amazon bro! link should be somewhere in the comments lol
@@ErikRose_ thx Bro
can this intake fit a 5.3 ecotec 2016 silverado?
the exact one i put no but i know they make one for ur engine as well! Similar but slightly different!
@@ErikRose_ but do you know where i can find it i was looking around 400-500$ ones
Que mas necesitastes para que funcione con e85 y la regular
Y si no la quiero aser e85 tambien tengo que poner el presurer regulador
Para ser el e85 ocupas las líneas de ptfe, la pompa para e85 y el filtro de gas que acepta e85. Solamente se ocupa el regulador si le cambias los injectores
Are you going to do any of the work or watch him do it all
someones gotta film right? 🤣
can u put it on without a tune or anything?
Yeah should be fine.
You don’t have to teach us if your not experienced 😂😂 cool build video! We don’t need pointers lmao
hey some need it ! 😂
@@ErikRose_most definitely keep doing your thing
On my 01 it’s drive my wire not cable
fr thats weird i thought they came like that in the newer ones! the cat eyes!
How tall is that intake
its a tall runner style manifold !
Bro efan conversion
I got it now lol
Where can I get the map sensor ?
it comes off your oem intake manifold!
@@ErikRose_ thanks bro how is the 102 mm intake holding up specs ??
@@clouthunterz781 its great so far, no issues only thing with these style manifold is that they are kind of loud but nothing crazy !
how u delete egr system?
Just disconnected all the lines and left a few hanging, tuner did the rest of the work!
If i was upgrading the intake, i would modify the harness, too,, looks ugly on top of it
It could actually go under the intake you just have to put it under before you install the intake we forgot so we just left it lol
@@ErikRose_ @ ok, yes underneath the intake , was s a good idea!! Looks good anyway 👍👍
Can you hit me with the link for that manifold and fuel rail?
I gotchu! it comes complete as a kit, this is the exact one I ordered!
www.amazon.com/Top10-Manifold-Throttle-Fabricated-Chevrolet/dp/B08Q3NWZ31/ref=asc_df_B08Q3NWZ31/?tag=hyprod-20&linkCode=df0&hvadid=516555722597&hvpos=&hvnetw=g&hvrand=7292159453427035406&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9031251&hvtargid=pla-1267429406765&psc=1
Hey u MFs! Give me some gotos to beef up a 10L-80E. On a 20 Silverado. 1000HP. Got the Torque C. Give me some magic
I’ve heard those 10L-80s hold great power! Definitely would recommend increasing the clutch count for over 1k hp! Sick build 🔥🔥🔥
Nice ! If you dont mind Bro can i get all the Links
I gotchu bro full list for what i did on mine for e85! These are exact links of what I bought.
Fuel Pressure Regulator : www.ebay.com/itm/293098256458?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VSwMTnaKQMa&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY
E85 Fuel Pump : www.ebay.com/itm/184033790153?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=YFsJgTc4R8q&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY
E85 fuel filter: www.ebay.com/itm/353786252312?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ckmxfmmqtas&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY
PTFE Fuel Line : EVIL ENERGY 6AN PTFE Fuel Line... www.amazon.com/dp/B07JFPXHB2?ref=ppx_pop_mob_ap_share
E85 Flex Fuel Sensor: ACDelco 13577429 GM Original... www.amazon.com/dp/B01GQR9C5O?ref=ppx_pop_mob_ap_share
E85 Sensor Connector: For GM E85 Flex Fuel Sensor... www.amazon.com/dp/B07115TSNK?ref=ppx_pop_mob_ap_share
E85 Quick-Disconnect Female Push-On EFI Fitting : EVIL ENERGY 6AN Male to 3/8" SAE Quick-Disconnect Female Push-On EFI Fitting a.co/d/6y8j7sV
And you’ll need AN6 fittings to connect all your PTFE hoses, that’ll differ depending on how you route your hoses. I got mine on Amazon as well. Thats Everything.
@@ErikRose_ Thank You Bro Going This Route for my 4.8 Should be good Right
@@1sixkobstahoe138 yessir 4.8 should be pretty much the same !
@@ErikRose_ Bet Thanks Bro , What about if i just want to install the intake manifold for now will it be just plug nd play bro ? Thanks for your time 💪🏽
Would this fit the 4.8?
yup its the same thing! well you’ll have to modify it a little like i did lol
Can you use the stock injectors ?
for that manifold? yes you can !
Your injectors didn’t leak ?
Nah no leaks !
What about the ports to the rectangle to cathedral
@@GbodySS_LsX no issues as well ! but i do know they make a cathedral port style for this manifold if you want that !
I already have it mounted just having fuel rail issues with my alternator but I bought fittings
@@GbodySS_LsX is not clearing or hitting the alternator? Because I know they make 2 different styles of the Manifold, a short runner and a long runner, mine is a long runner and clears with out issue!
Bro can u shoot mw a msg. I wanna ask u a few questions
wassup bro !?
I need your freind haha how much$?
he’s my brother 😂
I'm😢😢😢😅😮😅
junk intake and tb. u lost alot of hp with that
Have a Tbss now, and I’m boosting it.
Shouldve at least went with shortys my guy 😁
I think i might go with long tube in the future i heard the gains are pretty significant !