True,You guys are focused too much on materialistic things and fake news about country. You always think you guys are the best,because of the Dollar. God bless you guys.
Fantastic, these people are the true recycling experts. Nothing is beyond them. What they lack in modern machines they overcome with pure ingenuity and hard work.
@@deflash A lot less pollution than making a new one. His carbon footprint in work is next to nothing compared to an average Western worker who drives to work, has every appliance under the sun and eats take away. All while spending most evenings watching Netflix, farting and moaning about the state of the planet while the third world dig out and graft to make a pittance but are happy many with a smile.
After watching the man repair the sidewall on the tire, it all makes sense. The cleaning and prepping throughout the whole process as well as attention to detail on joining surfaces. The using of heat to vulcanize the patch is something I remember as a child.
Эта покрышка на выброс, дурачок. Она запросто может кого-нибудь убить при её разрыве. Дикари, вы скоро туалетную бумагу с презервативами стирать будете. Отсутствие у таких людей мозгов именно об этом и глворит
Then this sidewall explodes on the mountainside. The truck crashes and kills dozens of people. The savings from the consequences of such repairs will never be justified.
@@marshalkindo you honestly think they're doing this because they're trying to cut corners instead of ordering a new one off of tire rack or something? You sir / madam are a complete and utter tool... This is sheer necessity as there is no access / availability for a new tire thus making do with what is in hand. Pure craftsmanship & ingenuity... Furthermore I'd wager a new one of these tires is well over $1,000 if not five times that much. Which the driver would not be able to afford, again making do with what is available... And even brand new tires from reputable manufacturers have blowouts, tool...
@@marshalkinyou obviously have no clue as these types of repairs have been done for Decades and their failure rate is significantly lower than you think.
This is a Great Idea and skills Lost . This man is doing a great service for ones, that don't have a lot of money for a new tire. The Side wall's of these big tires do not have the Pressure that the Tread has. I have a large Tractor Tire with a tear this size, and plan to stitch it with Kevlar, which is about the strongest twine available. I would like to find that Peal and Stick Rubber Roll, but so far haven't found it yet. I have a boot on order and Industrial cement for the inside. Old Tire Repair shop's used to vulcanize with rubber strips, and a heat cap that was lit, which heated the underside. This Man has developed a similar way to vulcanize, by using a crude, but effective under the tire heat. Thanks for good old people that still will work. I'am 80, but still can move about to get things done. Any comments will be apreaciated. Thanks
I have ordered from a supplier called Acme Rubber in the past when doing repairs on tires like this. You should email them and inquire as to whether they'd sell you a smaller quantity. They typically do wholesale, but if you ask nicely, they're willing to ship out smaller amounts for a small fee.
These badly damaged sidewalls would never be attempted here in America .... they'd toss it in the trash and buy new ... industrial or agricultural. Not these ppl tho. Some of these guys even finish detailing them out to make them more presentable. This is one if the most fascinating things I've found in YT.
@@Wyomingchippewaits not a steel belted radial, its not even a steel belted. Its a bias ply tire that uses nylon cords. The only steel in the tire is where the bead is. Besides, even steel belted radials use nylon in the sidewall, many use it in the belts as well.
Very resourceful and very environmentally responsible to recover such a large badly damaged tire . Such knowledge and skills involved with basic equipment. Absolute Respect .
The name is poverty and lack of resources. They would love to buy a new tire, but kids from rich countries look at this and say "Oh, look how beautiful, the poor man with environmental responsibility..."
I don't think people who have never worked with a tire can appreciate how strong that man is the way he was moving that tire around. A tire that size probably ways 200-250lbs, easily.
I’m a tire tech. And I think he did a good job. I was more concerned about the safety of that. I know they have a thing where they will weeks tread to larger semi tires?? But this just comes off as dangerous to me.
@@aristonia1991 For sure it's not a road used tire It might be use for a shovel truck working off road in a crusher area or building site or so. Even the shovel truck wiil not move in a long distance range in the site. It will stay working in the same area loading or unloading So it's not for road speeding purposes so I think it's safe They will keep on repairing it until it's all gone So even this repair does not stay for long it will not harm anyone when it get damaged
@@aristonia1991 with a little common sense? Perfectly safe. Just don't stand near the repaired tire when it's under load, then it if goes boom, no one gets hurt. So long as no one is hurt by a rapid decompression, it is simply an annoyance getting the earth mover/truck/whatever machinery uses this tire out and into the repair shop on just three wheels. A tire like this would be around $2500 USD, so even if refurbishing it means more safety precautions must be taken on the jobsite, it is still worth it to repair and use until it's worn out.
@@sparklesparklesparkle6318 sounds like a skill issue to me. Just be careful and you won't get hurt. Should tell your friend/uncle to stop drinking on the job.
@Blasphemous Sadly over their our ideas of age are not easily found. Too us that's clearly his grandpa, but to them alot of our parents look like they'd be our siblings. Their life is just so much harder that a 50year old man from the west vs from the middle east is just not comparable.
Is it? Instead of going to school to be a doctor, an engineer or a teacher (etc), those children are learning a manual task, which will pay next to nothing, in order to survive. Please, stop romanticizing poverty.
Like the rest of you guys , who watched this video....I have seen many amazing things on YT... But this one...I can truly say , is one of the most incredible I've had the pleasure of watching . Such a lot of labor...wonder how long this process actually takes ? And his attention to detail , on every step , is impressive .... Wow !
Probably takes 4 - 5 days. There seems to be a lot of material drying processes, which take up a lot of time. I also imagine this one project makes this guy about the same money a Mc Donald's cashier makes in one shift. Or probably even less. 😥
Salute to Uncle and kid, usually with someone who has these roadside skills it's problematic that we Indo Pakis always bargain with them and never know the honest effort in making this scraping tire work for long and the confidence with you about the patch that gets repaired as newly updated as newest. Respect for work is truly appreciated by not having mentioned safety gear as usually they do.
I noticed the lack of anything that could protect feet fingers and eyes 👀. That was a worry especially when he used the spinning grinder and tiny chunks of rubber and materials went flying. Amazing job!👍
U guys don't get it they work the same amount as any other manufacturer labor or repair labor The difference is in the perceived and actual amount of resources in the area. In America our perceived resources are very high. But in real reality America's has just about the same resources as India or Pakistan or Germany or bulgaria
Just give this the money he asks for this job.. do not bargain.. this is incredibly hard work and to do with such perfection.. I'd rather give him a little extra than what he asked just as an appreciation for the hardwork alone 🙌
This is a wonderful demonstration of museum restoration of ancient artefacts. That tire probably is stiff and crumbly, but in the hands of an octogenarian it is re-made into a whole new museum piece.
sir you and your grandson just recreated the strongest tyre on the loader it came off, the psi pressure will hold that in place alone, forget the adesieve, a great video, a great channel, if you make we will watch, 🤝👍💑.
Respect & love from the USA friends! These guys are awesome! I love watching them turn scrap or damaged parts into refurbished & usable again! Amazing talents! 😇
My brother is NOT old, he's very active, mobile and clearly working. Skilled labor would have been a better title. I bet he would run circles around most teenagers #RESPECT Bless up from Brooklyn NY
Is this kind of repair really better than getting a new tire? Is this cost better because it’s cheaper to repair? And yes this is very tough work and he has excellent control.
Я пака смотрела на видео, так жалко стало этого человека. И представила себя как он устаёт на работе. Ишо не дай Аллах дома жена варчун, сила тебя кормилец семьи и здоровье.
Its great! What a skill! I highly appreciate the person who is doing his work so sincerely & precisely! Unbelievable! Whoever & wherever he is hats off to him. I love to see this kind of work. Wonderfull skill.
Here's the deal everywhere he saved between 2 to 5 thousand dollars and will not get paid $300 at least they always want miracles but will not pay even a fraction of what it saves
I watch every one of these that I can. The pride of workmanship, skill and determination to do the job right is something many could learn from. Such craftsmanship is to be commended... Kudos to this man on his hard work ..... and I'm sure it IS demanding. Congratulations on work well done. P.S. Many questions, such as exactly what is the painted-on material, as well as the adhesive-backed material? Im assuming vulcanizing paint and vulcanizing rubber sheeting. It's all very interesting to watch being applied.
@@moorekurtashley7377 with the thread he used to stitch everything up it should work fine. It seems what people forget, this is not a tire for some car going 70 mph on a highway. This is something going slow most of the time.
My salute to this man even the lovely child helped him in the best ever way possible. May the Almighty (S.W.T) give him the prosperity he deserves. Ya MALIKULMULK ham teri kis kis nemat ko jhutlaayien.
Back here watching tbis onecagain, and this mans pride of workmanship is truly amazing. And the younger one, right there with him, learning tge skills of this awesome trade (more work if art), by taking something like a badly damaged tire (injured beyond use) and turning it back into useful condition. Work that many wouldn't even attempt, but this man performs as a professional. Many wouidnt find this at all interesting, but to me it's fascinating. Ive watched such videoes of the 'higher tech' operations, repairing badly injured tires from the huge front-end loaders used in mining and quarries, and their materials are of state of the art air tools, used for skiving etc, on up to ore-measured boots and patches .... in the end, this msn and others achieve the same outcome .... they use the same techniques, vulcanizing cements, cushion gum, stitching methods, but doing the repairs at a fraction of the cost.
When a new tire this size can cost new in the thousands it is probably more expensive than the entire old tractor its going on. Trippy to see the caveman style vulcanization process but man this has got to be a life saver for some farmer or construction company in that part of the world. Cheers!
Outstanding job!!.. This mature man + young kid, real evidence Humankind ingenuity + skills + experience, are 'Real Time' proof that 'most anything' can be repaired. MUCH Love & utter Respect for these hard working men!!. This is a very hard 'kick ass' to actual 'replace anything / everything' trend. Many thanks & Blessings!!.. 🤗🏆🙏🙏🙏
An Excellent job done,laboriously brilliant & sheer knowledge how rubber tires function . commendable!Can't Express Enough in Words my Amazement & how this people toil with superb Skill.Imagine how costly more it is to send the Tire for a Machine Recapping!?
Honest hard work. Something folks seem to shy away from these days. Not afraid to get the job done. He sure doesn't have to worry about belly fat.! Like his young helper try his best to help out.
Those rubber replacement patches have to be adhered to that side wall with an incredibly strong bond in order to take on that kind of pressure. Phenomenal job.
The soft stuff he put on its rubber uncured im pretty sure that they use bond the the tread to the carcass of the tyre he literally vulcanized the patch on that part where he made the mold.
The carcass does not exist on an small place and you can't replace layers of steel weaving, with some thick cotton thread. They are'nt even vulcanizing the damaged spot correctly. This grandpa is making a sort of emergency repair, that is use AND brainless, because U can never use force on this tire again, let alone on the tread of the profile. I understand, that being poor is everything they have there, but this result is for the ass.
craftsmanship and skills! the only problem here is the safety of the driver who will use that tire and the people might involve in the accident. Strong old man! GOD bless!
A tire of that size is probably around $5000 usd mounted and balanced. They are super expensive....which is why it's better to pay a man like this a few hundred dollars for a repair instead of the cost of a new tire. Some tires and machines that work in mines go for as much as $50000 per tire. It's insane and a fookin very large tire lol
@@sirfreddiemercury6996 If it would be worthless nobody would pay this men for his repair work....And it seems he does such repairs not the first time....
The young lad helping his grandfather and both enjoying each others company is a thing we don't often see in the west.
Yeah, who needs school anyway when you can do this job for life?
This is child labour. They are maybe not relatives even.
@@annoyingbstard9407 School? Haha. You mean Indoctrination Center? Good slave you are.
True,You guys are focused too much on materialistic things and fake news about country. You always think you guys are the best,because of the Dollar. God bless you guys.
@@annoyingbstard9407⁹9⁹😮😮⁹⁹😮 ее😮 ⁹😮⁹⁹⁹ за то что не
Fantastic, these people are the true recycling experts. Nothing is beyond them. What they lack in modern machines they overcome with pure ingenuity and hard work.
This is literally going to explode on the road and get people killed or injured at worst.
and also materials you can order online.
Recycle expert that blow all the crap in the air 😂
@@deflash A lot less pollution than making a new one. His carbon footprint in work is next to nothing compared to an average Western worker who drives to work, has every appliance under the sun and eats take away. All while spending most evenings watching Netflix, farting and moaning about the state of the planet while the third world dig out and graft to make a pittance but are happy many with a smile.
@@deflash
When you take your car for an MOT, don’t tell me you’d wanna scrape through for as little as possible even if your vehicle is a smoker.
This guy never gets TIRED
Comments like these just TIRE the hell outta me
@@wrecktal_seepager
I'm sure he suffers from BURNOUT every now and then.
😮😢😢illlllĺķķ
After watching the man repair the sidewall on the tire, it all makes sense. The cleaning and prepping throughout the whole process as well as attention to detail on joining surfaces. The using of heat to vulcanize the patch is something I remember as a child.
Эта покрышка на выброс, дурачок. Она запросто может кого-нибудь убить при её разрыве. Дикари, вы скоро туалетную бумагу с презервативами стирать будете. Отсутствие у таких людей мозгов именно об этом и глворит
Then this sidewall explodes on the mountainside. The truck crashes and kills dozens of people. The savings from the consequences of such repairs will never be justified.
@@marshalkindo you honestly think they're doing this because they're trying to cut corners instead of ordering a new one off of tire rack or something? You sir / madam are a complete and utter tool...
This is sheer necessity as there is no access / availability for a new tire thus making do with what is in hand. Pure craftsmanship & ingenuity...
Furthermore I'd wager a new one of these tires is well over $1,000 if not five times that much. Which the driver would not be able to afford, again making do with what is available...
And even brand new tires from reputable manufacturers have blowouts, tool...
@@marshalkinyou obviously have no clue as these types of repairs have been done for Decades and their failure rate is significantly lower than you think.
@rudypeev bullshit any failure Rate is to high. Can't use string on a steel reinforced sidewall
Highly difficult task but this wise man did it so technically. Extremely strong man.
Long live.
Ensina teu filho no caminho que deve andar , poque quando crescer não desviará dele👏👏👏👉🇧🇷👈
I bet his hands are hard as rocks.
Very shoddy work he performed
@@Jack_Mehoff7221 oh yes? As compared to what exactly?
@@Jack_Mehoff7221We know where your hand strength comes from.
This is a Great Idea and skills Lost . This man is doing a great service for ones, that don't have a lot of money for a new tire. The Side wall's of these big tires do not have the Pressure that the Tread has. I have a large Tractor Tire with a tear this size, and plan to stitch it with Kevlar, which is about the strongest twine available. I would like to find that Peal and Stick Rubber Roll, but so far haven't found it yet. I have a boot on order and Industrial cement for the inside. Old Tire Repair shop's used to vulcanize with rubber strips, and a heat cap that was lit, which heated the underside. This Man has developed a similar way to vulcanize, by using a crude, but effective under the tire heat. Thanks for good old people that still will work. I'am 80, but still can move about to get things done. Any comments will be apreaciated. Thanks
I have ordered from a supplier called Acme Rubber in the past when doing repairs on tires like this. You should email them and inquire as to whether they'd sell you a smaller quantity. They typically do wholesale, but if you ask nicely, they're willing to ship out smaller amounts for a small fee.
It's not lost anymore is now. Thanks to TH-cam and Bill Gates, we are now more smarter and wiser.
Kudos to you. Never surrender to hard work.
When I saw the thumbnail I was thinking “hell no” , but this is actually a VERY thorough repair!
I thought the same.
Same.
But the labor is hard and tedious. Didn't expect it to turn out so perfect
same. thought it looked sketchy first, but this old man obviously knows what he is doing.
can we just appreciate for a second how clean and groomed and helpfull the kid is in this workshop full of dust and tar and burnt rubber. amazing
That's what I was thinking. Imagine if they had a nice clean professional place with modern tools and enviroment, what they will be able to achieve!
These badly damaged sidewalls would never be attempted here in America .... they'd toss it in the trash and buy new ... industrial or agricultural. Not these ppl tho. Some of these guys even finish detailing them out to make them more presentable. This is one if the most fascinating things I've found in YT.
Yep. And when he used the cheat bar was great. Little man has old timer showing him the ropes
childlabour seems to be cool for you?
This gentleman is extremely strong, he moves this tire like it weighs nothing!
He is probably 40-45 years old 😎
Experience
@@englewood1971 40 to 45 are you kidding...he is 60 to 65 years old.
It's all technique... Moving heavy things is more about technique... Why he makes it look easy.
Did we watch the same video? It looked quite difficult for him
I’m more impressed that he still has all his fingers and toes still
I can’t believe they use this after 😂 these tires can easily kill you if they explode 😂
Great to see old school repairs, especially reinforcing the sidewall. Making do with what you have versus a throw away society .😊
How is string reinforcing an area that was made of STEEL and rubber???
@@Wyomingchippewaits not a steel belted radial, its not even a steel belted. Its a bias ply tire that uses nylon cords. The only steel in the tire is where the bead is.
Besides, even steel belted radials use nylon in the sidewall, many use it in the belts as well.
Very resourceful and very environmentally responsible to recover such a large badly damaged tire . Such knowledge and skills involved with basic equipment. Absolute Respect .
He pisses the big tire companies off.
Respectful he is THE MAN
Not to mention the repurposed engine valve that he is using as his needle
The name is poverty and lack of resources. They would love to buy a new tire, but kids from rich countries look at this and say "Oh, look how beautiful, the poor man with environmental responsibility..."
@@davenoejoehow? By doing a repair that could kill someone? Tires are made of STEEL and rubber not string😂😂😂
Masha Allah this pakistani old man is really giving his 100% into his work. Earning every penny in a Halal way.
Mohammed is a false prophet.
I don't think people who have never worked with a tire can appreciate how strong that man is the way he was moving that tire around. A tire that size probably ways 200-250lbs, easily.
I guess smoking 🚬
Is the real reason for his strength and stamina!!
Or how easy he made it look sewing it up.
I’m a tire tech.
And I think he did a good job.
I was more concerned about the safety of that.
I know they have a thing where they will weeks tread to larger semi tires?? But this just comes off as dangerous to me.
*Weys
These tires are mad expensive, got to repair if possible, for sure. Great work, absolutely amazing craftsmanship.
The only real question is; how safe is it by today specs.
@@aristonia1991
For sure it's not a road used tire
It might be use for a shovel truck working off road in a crusher area or building site or so. Even the shovel truck wiil not move in a long distance range in the site. It will stay working in the same area loading or unloading
So it's not for road speeding purposes so I think it's safe
They will keep on repairing it until it's all gone
So even this repair does not stay for long it will not harm anyone when it get damaged
@@aristonia1991 with a little common sense? Perfectly safe. Just don't stand near the repaired tire when it's under load, then it if goes boom, no one gets hurt. So long as no one is hurt by a rapid decompression, it is simply an annoyance getting the earth mover/truck/whatever machinery uses this tire out and into the repair shop on just three wheels.
A tire like this would be around $2500 USD, so even if refurbishing it means more safety precautions must be taken on the jobsite, it is still worth it to repair and use until it's worn out.
@@sparklesparklesparkle6318 sounds like a skill issue to me. Just be careful and you won't get hurt. Should tell your friend/uncle to stop drinking on the job.
@Kual Svinus Someone needs to learn to talk to people.... inbred
Old the real gold. I cannot do this job for myself. This man is so strong and full of stamina. Appreciate this so much❤👍👍👍👍
It is always a great joy to see a real craftsman doing his job so well.
Good to see him passing his knowledge along to another generation and better seeing the young man eager to learn and willing to work so hard with him.
or maybe.....hear me out........send the kid to school to learn to read and write
@@davidroosa4561 sure, but that is not always possible
@@GG-ii1uc ll llo
@Blasphemous Sadly over their our ideas of age are not easily found. Too us that's clearly his grandpa, but to them alot of our parents look like they'd be our siblings. Their life is just so much harder that a 50year old man from the west vs from the middle east is just not comparable.
Is it? Instead of going to school to be a doctor, an engineer or a teacher (etc), those children are learning a manual task, which will pay next to nothing, in order to survive. Please, stop romanticizing poverty.
Like the rest of you guys , who watched this video....I have seen many amazing things on YT...
But this one...I can truly say , is one of the most incredible I've had the pleasure of watching . Such a lot of labor...wonder how long this process actually takes ?
And his attention to detail , on every step , is impressive ....
Wow !
Моллоодец. Ттруддяга
@@wyyeesjehhe9195 What language?
Probably takes 4 - 5 days. There seems to be a lot of material drying processes, which take up a lot of time. I also imagine this one project makes this guy about the same money a Mc Donald's cashier makes in one shift. Or probably even less. 😥
@@march1903Русский
It was timed with several cigarettes.
Salute to Uncle and kid, usually with someone who has these roadside skills it's problematic that we Indo Pakis always bargain with them and never know the honest effort in making this scraping tire work for long and the confidence with you about the patch that gets repaired as newly updated as newest.
Respect for work is truly appreciated by not having mentioned safety gear as usually they do.
I noticed the lack of anything that could protect feet fingers and eyes 👀. That was a worry especially when he used the spinning grinder and tiny chunks of rubber and materials went flying. Amazing job!👍
@@thefirststudentzero welcome to the subcontinent, brother.🤣🤣🤣
indo mean india bro
And notice the guy did not try to catch rubber in his eyeballs like an idiot in western Countries would by nature do.
These videos should get more views. Those people have to work so hard to earn just a small amount. They deserve more credit...
These videos will humble you really fast!
I watch them all the time!!
U guys don't get it they work the same amount as any other manufacturer labor or repair labor
The difference is in the perceived and actual amount of resources in the area.
In America our perceived resources are very high. But in real reality America's has just about the same resources as India or Pakistan or Germany or bulgaria
@@hickstylez yea I see my local tire repair shop fixing tires like this all the time lol get outta here
Just share it for more people to view them!
Just give this the money he asks for this job.. do not bargain.. this is incredibly hard work and to do with such perfection.. I'd rather give him a little extra than what he asked just as an appreciation for the hardwork alone 🙌
Don't you see her is a mushrik? He is smoking ( doing nasha!)
Big UP ☝🏼
This is a wonderful demonstration of museum restoration of ancient artefacts. That tire probably is stiff and crumbly, but in the hands of an octogenarian it is re-made into a whole new museum piece.
Это робот крепкого здоровья ему и его семье и чтобы они были всегда сыты за адский труд который он делает
Адский труд это работа в шахте а это обычная работа
What an ingenious and complicated process. Great to see it. Such a hard working chap too. He's saved somebody a lot of money.
Grande maestria e intelligenza, che ti fa risparmiare un sacco di soldi, anche se per me, meritano molto di più..
Saved r planet
He may well cost them their life
@@mazzerrattiest4880 what you talking about?
And recycled a working tyre, instead of using up more resources in making a complete new one.
sir you and your grandson just recreated the strongest tyre on the loader it came off, the psi pressure will hold that in place alone, forget the adesieve, a great video, a great channel, if you make we will watch, 🤝👍💑.
That's not his grandson it's his brother 🤣
F
Respect & love from the USA friends! These guys are awesome! I love watching them turn scrap or damaged parts into refurbished & usable again! Amazing talents! 😇
$500+ tire $12 fix.. Amazing 👏.
Simply marvelous.
This is defintely a $7000+ tire! And who knows how much he got paid for this job is just anyones guess.
in our country Pakistan he got about 70 dollars for this remarkable job...
My brother is NOT old, he's very active, mobile and clearly working. Skilled labor would have been a better title. I bet he would run circles around most teenagers #RESPECT
Bless up from Brooklyn NY
A lot of these people haven't a clue and sit on there phones all day wouldent o what a good days work is that man is clever and fantastic 👍👍
You think? I would of never guessed he has far more experience then a teenager
@@Dannyhunter1970 here you are, thumbing thru your phone like a teenager.
Is this kind of repair really better than getting a new tire?
Is this cost better because it’s cheaper to repair?
And yes this is very tough work and he has excellent control.
Definitely old. Do they teach the definition of words in Brooklyn schools?
How they vulcanized that rubber repair is truly human ingenuity.
Godspeed and Blessings to Them and Theirs...Truly
What does vulcanize do?
@@mr.fantastic7756 Melts the rubber chemically.
@@mr.fantastic7756 it hardens the rubber
Its always so satisfying to see skilled labour and motorcycle noises for me. You get the feel he puts honest work and experience in this.
Wow!!, what an incredible job 👏🏼, I love that the kid is helping and learning the skill, priceless!!.
...the young apprentice possibly securing his future.
Отец дай бог тебе здоровья 💪работу которую ты выполняешь безумна тяжёлая,👍🔥🔥🔥🔥👍
Я пака смотрела на видео, так жалко стало этого человека. И представила себя как он устаёт на работе. Ишо не дай Аллах дома жена варчун, сила тебя кормилец семьи и здоровье.
@@orxanesgerov6132 они это делают с малых лет и занимаются всю жизнь ) это для нас тяжело , а для них как обычно )
Не только тяжёлая, но ещё и бесполезная. Хорошо нагрузить, и выстрелит в любой момент. Скорее всего просто продадут как "не битую, не крашеную"
@mike Russian 🇷🇺
@@Akellaaaaaa по себе не мерь
We need to bow our heads in a moment of silence and respect for this man's amazing skills 🙏💯
Its great! What a skill! I highly appreciate the person who is doing his work so sincerely & precisely! Unbelievable! Whoever & wherever he is hats off to him. I love to see this kind of work. Wonderfull skill.
A new tire like this can cost between 1200-2000$ easily. Well worth repairing!
Depending on what it goes on these tires can easily top 10,000
Regrooving is also an artform. First time I saw a regrooved agriculture use tire I was pretty fucking impressed. Boggers too.
And this job should be cost around $50 in Pakistan
Happy days for both sides
Pakistaan is poor condition because his maximum fund spend in terrism
Here's the deal everywhere he saved between 2 to 5 thousand dollars and will not get paid $300 at least they always want miracles but will not pay even a fraction of what it saves
Truly incredible to see the labor that goes into such repairs, the only problem I have is that I bet he gets paid a pittance for doing it!
Well, with a 15$ profit he is probably the richest man in town now! Perfect example that we throw away to much things.
i was thinking i hope he gets paid well for that one.
Only took him a half hour ¯\_(ツ)_/¯
I'm not sure their society works on a capitalism type system.
He only has a little palace with 30 rooms and 80 camels....🐫🙏
MAA SHAA ALLAH 💚
Excellent job.👏👏👏👏🤲🤲🤲
Hard work. I hope you get well paid sir. Salute to your dedication and thorough detailed repair work.
Tak treba! A so všetkými vecami. Klobúk dole, robíte pre planétu Zem a ľudí na nej záslužnú prácu.
Boh Vás žehnaj ❣️🙏❣️
Hii
Much respect to such people and such masters. You are great fellows. Make more videos and more repairs
Hello from Kazakhstan
✨✨
Thanks, from Pakistan
shut up from pakistan
When he got to 16:50 I said "gettt the fuck outta here". This is more than a patch. He fully created tire where there wasn't tire. Amazing work.
I watch every one of these that I can. The pride of workmanship, skill and determination to do the job right is something many could learn from. Such craftsmanship is to be commended... Kudos to this man on his hard work ..... and I'm sure it IS demanding. Congratulations on work well done.
P.S. Many questions, such as exactly what is the painted-on material, as well as the adhesive-backed material? Im assuming vulcanizing paint and vulcanizing rubber sheeting. It's all very interesting to watch being applied.
The naysayers can't make money off of it so they put it down.
आपकी लंबी उम्र हो आप ऐसे ही पंचर बनाते रहे 🙏🌹
Truly admire these ingenious hard working people. Love that boy help to climb in the big tyre to remove the supports. Wish them well & happy.
Even on his day off this guy goes to work! Great job
amazing to see the work that goes into a repair like this.
I appreciate the work done by this man...It's safes us some money but at the same it has high risk of getting burst..
no it does not thats a dam good repair
yall put air in that??? the ones we have put fluid inside
@@soulsreaper7145 depends on what you do with it.
@@moorekurtashley7377 with the thread he used to stitch everything up it should work fine. It seems what people forget, this is not a tire for some car going 70 mph on a highway. This is something going slow most of the time.
with the vulcanization the tire will hold as new one
My respects to this old man he is a hardworking man providing and supporting his family
Love watching the old timers work
Props to his little helper..kids that put in the work get my respect
Más que un trabajo, un Arte. Felicitaciones a las personas trabajadoras con su trabajo honesto.
Hear here!
for shore
Considering the tools they have there to work with its very impressive.
Opĺlllĺlllllllllĺlllllĺllĺllllllllĺllllĺlllĺlllllĺllllllllllĺlllllllĺllllĺllllĺlllllllllĺllllllllllllĺlllllĺ
Lĺĺlllĺllll
Someone should open a harbor freight over there
No need sophisticated tool for that
This man put more effort into this one tyre than I have in all my jobs throughout my working career
A real man doing an HONEST days work...
Bloody Hard Graft ,Respect to you Sir !👍👍👏👏👏👏
The cigarette 🚬 is one of the most important tools in this repairing, he deserves 5 stars for his efforts 🌟🌟🌟🌟🌟
I clicked on the video because of the cigarette
@@Serpent69.69 same😘
Absolutely
Me too same cigarette
I love ❤ such workers, they pay their lives for their families
My salute to this man even the lovely child helped him in the best ever way possible. May the Almighty (S.W.T) give him the prosperity he deserves. Ya MALIKULMULK ham teri kis kis nemat ko jhutlaayien.
You do what you can, with what you have. Excellent.
His dedication proves that humans are actually good by nature. May he get by with a greater ease.
Yeah doing a shitty repair that will kill somebody proves he's good by nature
You're just a moron with expectations below the floor, thats all
What ?
Legend says that this technique has been used for thousands of years since man made the first tire.
Please tell me you’re joking and this sarcasm
@@barryallen8753 it is. I am a very sarcastic person. It can be annoying at times but many love me for it.
@@jonathanrangel565 okay
@@jonathanrangel565 bro why do you have to explain yourself to such a Rtard? Lmfao... like clearly it is a joke...
Pakistan is a land of loving and hardworking folks. Genuine quality speaks for itself ❤❤❤
Back here watching tbis onecagain, and this mans pride of workmanship is truly amazing. And the younger one, right there with him, learning tge skills of this awesome trade (more work if art), by taking something like a badly damaged tire (injured beyond use) and turning it back into useful condition. Work that many wouldn't even attempt, but this man performs as a professional. Many wouidnt find this at all interesting, but to me it's fascinating.
Ive watched such videoes of the 'higher tech' operations, repairing badly injured tires from the huge front-end loaders used in mining and quarries, and their materials are of state of the art air tools, used for skiving etc, on up to ore-measured boots and patches .... in the end, this msn and others achieve the same outcome .... they use the same techniques, vulcanizing cements, cushion gum, stitching methods, but doing the repairs at a fraction of the cost.
When a new tire this size can cost new in the thousands it is probably more expensive than the entire old tractor its going on. Trippy to see the caveman style vulcanization process but man this has got to be a life saver for some farmer or construction company in that part of the world. Cheers!
Exactly
th-cam.com/video/p0R-YWQCfdQ/w-d-xo.html this is not a cave option. and nothing new. These tires are worth the repair
Excellent work
Salute to the fathers men who work hard in the harshest conditions to feed their families
It’s amazing what people can do when it’s born out of necessity. And something tells me that little guy works just as hard when there’s no camera.
I'm so proud to have seen this Duo work awesome together. Nothing beats strong work ethic! You should be real proud of you're boy.
Outstanding job!!..
This mature man + young kid, real evidence Humankind ingenuity + skills + experience, are 'Real Time' proof that 'most anything' can be repaired. MUCH Love & utter Respect for these hard working men!!. This is a very hard 'kick ass' to actual 'replace anything / everything' trend. Many thanks & Blessings!!.. 🤗🏆🙏🙏🙏
Very hard work, also developing countries, can find these workers。
That is well worth the effort for someone . Incredible skills.
We can not find like this man in all United States 🇺🇸
We exist we just have fancier equipment
you can, we just have the privilege to not have to do these things.
An Excellent job done,laboriously brilliant & sheer knowledge how rubber tires function . commendable!Can't Express Enough in Words my Amazement & how this people toil with superb Skill.Imagine how costly more it is to send the Tire for a Machine Recapping!?
Wow! This man works hard..amazing job!😍👌
Soo much work into a repair like this. Great job. 👍
I'm betting it holds air with full weight. Excellent! Vulcanized too!
You right bro
Nós temos muito a aprender com esse povo. Recuperar antes de descartar e substituir. Saudações do Brasil 🇧🇷🇧🇷
Привет из 🇷🇺
What a great deal of knowledge and experience involved in doing that work.
Honest hard work. Something folks seem to shy away from these days. Not afraid to get the job done. He sure doesn't have to worry about belly fat.! Like his young helper try his best to help out.
Fascinating I’m very impressed the knowledge this man has is incredible
Those rubber replacement patches have to be adhered to that side wall with an incredibly strong bond in order to take on that kind of pressure. Phenomenal job.
The patches on the inside become even stronger when the tire is inflated .
The soft stuff he put on its rubber uncured im pretty sure that they use bond the the tread to the carcass of the tyre he literally vulcanized the patch on that part where he made the mold.
@@dennnis6416 Right. He's basically melting the rubber fibers together. Very tedious work
Esperemos q aguante.
The carcass does not exist on an small place and you can't replace layers of steel weaving, with some thick cotton thread. They are'nt even vulcanizing the damaged spot correctly. This grandpa is making a sort of emergency repair, that is use AND brainless, because U can never use force on this tire again, let alone on the tread of the profile. I understand, that being poor is everything they have there, but this result is for the ass.
craftsmanship and skills! the only problem here is the safety of the driver who will use that tire and the people might involve in the accident. Strong old man! GOD bless!
Crazy I didn’t know Alvin and the Chipmunks were so big over there….
Jammin out to the “classics” 😂👍
من العراق
آللهم ارزقه رزقا حلالا طيبا مباركا فيه يارب العالمين والصلاة والسلام على سيدنا وحبيبنا ونبينا محمد وعلى آله وصحبه أجمعين
Amazing work. Hardwork and patience. Big Respect to uncle.
Неплохо. Осталось чернение резины замутить, и баллон будет как новый)
Hi how r u? It handwork
Perfect specıal man repaired old tire.. 👍
God bless your work and your efforts
This what you call saving the environment with pure handicraft.
Wow! That's A lot of work to fix a tire! Then again, I'm sure tires are incredibly expensive! Amazing job!!
160.00$ at discount tires
A tire of that size is probably around $5000 usd mounted and balanced. They are super expensive....which is why it's better to pay a man like this a few hundred dollars for a repair instead of the cost of a new tire. Some tires and machines that work in mines go for as much as $50000 per tire. It's insane and a fookin very large tire lol
@@Epochstudios it's a worn out tractor tyre... it's worthless.
@@sirfreddiemercury6996 If it would be worthless nobody would pay this men for his repair work....And it seems he does such repairs not the first time....
Very correct way of fixing it. Good job,
God bless you old man you're the best #1
Parabéns,Memo com toda as dificuldades são profissionais no trabalho .
@mike 🏴 English is a option.
👋Всем привет! 👍Прикольный дед, как в рекламе Теле2 ....🤣
Это он и есть, подрабатывает в свободное время!
@@user-sk6gh3qc9s Ахахахах
@@user-sk6gh3qc9s 🤣🤣🤣
اتري مثل هذا الصناعات في باكستان والهند ودول شرق آسيا فعلا مبدعين وعندهم صبر كبير
Masha’Allah Masha’Allah I Wish Whole Of Pakistan Could Become This Hardworking 🤲🏼🤲🏼🤲🏼
Espetacular parabéns muito profissional 🇦🇫👍👍
he is from Pakistan Not Aghanistan..he is from KARACHI PAKISTAN
@@fazalilabbasawan51214 most of these pathan looking guys are Afghan immigrants working in karachi
The end result looks better than most places that have the tech to do it quicker. Very impressive
This oldman is vast experienced and heavily skilled.
Tire repair looked good... I was more impressed at how hard that little boy was working. Wish our American kids worked that hard
Those are some hard-working folks. ❤