That's EXACTLY the weapon light you want for the CQB purpose you built the rifle for. If you build another that is more multipurpose rather than CQB, a higher candela light makes sense. At this time only the 600 version of that same light will have better CQB performance.
I built an upper is similar back in 2008/9 using one of John Noveske's N4 barrels 14.5 M249 turn down blank, perm PWS NT4 flashcomp. Still going but I don't shoot it as much anymore, round count is around 20K and not showing any adverse signs yet.
have one myself. Sadly I went with a aero upper. Gonna see if using a colt upper and colt bcg will improve accuracy. Currently getting like 2.5 moa with Winchester M855.
Mine was built by DD…I can’t really complain with accuracy. You can always send it to APE defense and have them FIT everything together…they’ll get you a great shooter
My build is similar Got surfire scout with electrical tap for the cable management and the tap switct (it works) PSA lower with SLS magpul stock (recovering broke nigga) DD Ris II FSB 14.5 pin and weld EXPS3 DD fixed rear sight Magpull angled grip Magpul adjustable sling and a DD sling QD socket No laser (yet)
Why choose FSP RIS II and keeping the delta over the low profile gas block and full rail RIS II? What’s the advantage to keep the delta? I’m asking bc I’m not sure what option to adopt on my AR.
I’d say there are more advantages with the lowPro block and full length rail. Most glaring advantage is real estate for lights and lasers and being able to put them where you want them. I went FSP because it suited me and it was a smoking deal 😅
I’m confused on the pressure pad setup. The dual switch for laser/ light makes sense, but what is the extra modlite button for? That would have three leads, but only two devices to attach to?
The DBAL A3 has dual Output so I can run the vis laser or the IR marker/illuminator switched to ON and have a switch for each one. So I can throw either one without changing the settings on the DBAL
The DBAL A3 has dual Output so I can run the vis laser or the IR marker/illuminator switched to ON and have a switch for each one. So I can throw either one without changing the settings on the DBAL
Doing a similar build, got the SOCOM profile barrel, Daniel Defense RIS II FSP rail, what brands of upper receivers are good to go with the barrel and the rail?
@@MillWorks-vi6oj awesome 😎 I originally was going to go with aero precision upper but was unsure about it, looked at Daniel Defense but I didn't see that they had just the upper for sale, most came with the rail and barrel as well. Should have switched my MOS to armory while I was in the Corps to gain more knowledge 😂
@@cuylercronin I’m assuming you are new to guns in this case. That riser makes the eotech that is already high up over the bore of the rifle even higher, somewhat better if your shooting with night vision on, but it is a CQB optic and in CQB as it sits with the mount, makes you have large hold overs and also screws up your cheek placement for fast shooting. So there are a lot of downsides to the mount with a few up sides to it. If you have any questions feel free to ask and myself and the team can get you set up correctly so you don’t spend lots of money on bad set ups and develop bad shooting habits
@@Flashhideronly yeah I run a unity riser for my eotech on my 10.3 build but I wouldn’t run anything high on my longer guns. Love high mounts, way more comfortable to shoot just have to practice and know your hold overs.
Wanting to build a new sbr for work I came across the clone scene and I definitely want to do something similar. However my current parts list includes the ris2, a colt upper, rc2. And I also have a Unity mount and t2. So unsure if there are other clones that would align with what I already have. The reason I went with t2 instead of Eotech was for the Unity built in rear sight. But the option of just removing the qd to access the buis was always in the back of my head.
Honestly I Fully watched the video and you’re going out to 300? CQB in my book but a 14.5 can easily get pushed out to easily 600 yards you’ll have a 100 Moa drop…. understand no it is 0 to 77 and you use 62 grain your holes are going to be extremely different then again you’re running a eotech Can be used to judge distance but not the best for 3-600 I would try out some sort of LPVO set up …. I have a build w a CHF CL Centurion Arms Socom profile barrel .0615 gas port pre pinned and tabbed similar to DD mk12 block also is pre dimpled and a tight gas block fit it is in my book a better barrel as I wasn’t going for cloning but did want the heavy so on barrel the pinned the block and polished the m4 feed ramps 480 bucks later…. Throwing i. A geissele super 42 braided buffer h2 w their Grey buffer tube have radian and geissele lower parts and trying the ssp trigger out and waiting… I might do an acog RMR combo or a no nightforce atacr 1x8
Why would u run so many switches look at the firearm as OK what am I gonna be doing with this how am I gonna be most comfortable is there going to be a white light accidental discharge I do not understand why you have a duel switch Plus a white light switch the only reason I could be thinking is if you have it switched it like an IR mode or something but it’s still A lol overboard with the wires at most out run a cloud defensive mode DS 07 And with IR all you really have to do is thumb it on top
It works for me. DBALA3 has the ability to have Vis and IR readily available to be fired through two separate switches. It’s an easy system to work and one I’ve worked with for a while now.
![CAMPปลิ้น | EP.77[2/2] "รับทราบ" แก๊งเพื่อนรัก 10 ปี ที่ไปไหนก็มีตำนาน!](http://i.ytimg.com/vi/ifc0ofD51B0/mqdefault.jpg)
This build is chefs kiss. Absolutely gorgeous. I’m a sucker for mismatched FDE
i just got a ddm4 fsp upper as well...itll be setup damn near the same. glad you like it
Sweet rifle man I’m a sucker for FSP rifles, such a timeless look especially with that RIS 2
That's EXACTLY the weapon light you want for the CQB purpose you built the rifle for. If you build another that is more multipurpose rather than CQB, a higher candela light makes sense. At this time only the 600 version of that same light will have better CQB performance.
Really diggin the fde and green...most likely going to copy that!
Man that’s sweet rifle! I need one !
Very nice, you put some thought into it.
I built an upper is similar back in 2008/9 using one of John Noveske's N4 barrels 14.5 M249 turn down blank, perm PWS NT4 flashcomp. Still going but I don't shoot it as much anymore, round count is around 20K and not showing any adverse signs yet.
Can’t argue with a Noveske… sounds like a banger 🤙🏻
This is nice!
Great build. The magwell you're using, I have the same on my MK18.
I'll be getting on of those uppers soon
i love spikes lowers man. they do quality work. i use them for my block 2 cqbr and URGI
This was the first lower I bought(2013 time frame) and I couldn’t let it go…it’s seen a lot of use in 11yrs
I really like block ii with triangle iron gunsight
Beautiful.
I simp hard for this😍
have one myself. Sadly I went with a aero upper. Gonna see if using a colt upper and colt bcg will improve accuracy. Currently getting like 2.5 moa with Winchester M855.
Mine was built by DD…I can’t really complain with accuracy. You can always send it to APE defense and have them FIT everything together…they’ll get you a great shooter
Aero is good to go. If anything it’s finish quality is better than Colt these days.
H2 buffer is that to accommodate the 77 grain I’m sure you have it dialed. Thanks.
It could use a bit more tuning…the Bolt Carrier is heavy duty so I’m trying to find the best balance. H2 has helped it seems
My build is similar
Got surfire scout with electrical tap for the cable management and the tap switct (it works)
PSA lower with SLS magpul stock (recovering broke nigga)
DD Ris II FSB 14.5 pin and weld
EXPS3
DD fixed rear sight
Magpull angled grip
Magpul adjustable sling and a DD sling QD socket
No laser (yet)
Good shit. What did you say the riser was called? Also how tall is it? Close to the same as a unity or?
It’s from my friends at Bobro Engineering
Why choose FSP RIS II and keeping the delta over the low profile gas block and full rail RIS II? What’s the advantage to keep the delta?
I’m asking bc I’m not sure what option to adopt on my AR.
I’d say there are more advantages with the lowPro block and full length rail. Most glaring advantage is real estate for lights and lasers and being able to put them where you want them. I went FSP because it suited me and it was a smoking deal 😅
I’m confused on the pressure pad setup. The dual switch for laser/ light makes sense, but what is the extra modlite button for? That would have three leads, but only two devices to attach to?
Otherwise sick build!
The DBAL A3 has dual Output so I can run the vis laser or the IR marker/illuminator switched to ON and have a switch for each one. So I can throw either one without changing the settings on the DBAL
The DBAL A3 has dual Output so I can run the vis laser or the IR marker/illuminator switched to ON and have a switch for each one. So I can throw either one without changing the settings on the DBAL
Doing a similar build, got the SOCOM profile barrel, Daniel Defense RIS II FSP rail, what brands of upper receivers are good to go with the barrel and the rail?
Can’t go wrong with a factory Daniel Defense, Sons of Liberty, BRavo Company, or have APE Defense build
You one 🤙🏻
@@MillWorks-vi6oj awesome 😎 I originally was going to go with aero precision upper but was unsure about it, looked at Daniel Defense but I didn't see that they had just the upper for sale, most came with the rail and barrel as well. Should have switched my MOS to armory while I was in the Corps to gain more knowledge 😂
I love them surefryers
Who's specific spring and H2 buffer are you running? Getting my first carbine gas and dont want my parts to be dead so fast
99% sure I’m running the Aero Precision setup in this one.
Sig MCX-Spear / ХМ7 6.8×51 .
But it's not clone correct 😵💫
Anyways nice build, looks good.
😂absolutely not 😂😂😂
That’s not a break right? Compensator? Seriously curious, I k ow there’s way more types of muzzles devices.
It’s just a Sure Fire flash hider.
What marker did you use for those witness marks?
UniBall oil based paint pen🤙🏻
Is that the socom barrel upper and is it overgassed ?
Its M4 profile, I never felt as though it was overgassed.
looks sick!!! would kick early HK416 ass..
Thank you!
Is the M4A1 FSP RAIL INTERFACE SYSTEM, RIS II in FDE? Hard to tell.
It’s their FDE/Bronze anodized hardcoat finish
@@MillWorks-vi6oj man…I’ll just buy yours when you’re ready to sell 😂
I've bought and sold three or four of these uppers. This was the best of the lot...
@@MillWorks-vi6oj what color are the ergo rail covers?
@@anonymized1951 these are sage
What riser are you using on the Eotech?
BOBRO Engineering- Good people 🤙🏻
MK 18 CQBR .
Do you guys sell those red goblins? Looked on your site and couldn't find them in that color. If y'all don't sell them, where could I find them?
Shoot me an e-mail. I can make you a set as a custom order. They were a limited run but I have the material.
@@MillWorks-vi6oj Alright cool, I'll get back to you when I get paid at the end of the week if you'll still have the material by then.
Question... could a 13.7 fit that rail? 🤔
I was told a 13.7 would fit(from armorer). The Issue was finding a 13.7 with a carbine gas length…
@@MillWorks-vi6oj Good looks man! Hmm, Might have to get it chopped..
@@MillWorks-vi6oj Ballistic Advantage.
Odg> fde...quad rails> mlok
What brand Is the riser?
BOBro Engineering makes the riser
what pic rail qd point is that?
Troy Industries QD360
SKU#:
SMOU-PBS-00BT-01
🤙🏻
What color are the rail covers?
Foliage is the color I do believe.
What color are the rail covers
Sage Green I believe
what brand magazine?
DuraMag 🤙🏻
preeeesh brotha man. Totally just copped a bunch of em. @@MillWorks-vi6oj
What’s the weight on that build?
Ooof…it’s heavy…probably 13-14lbs all in
@@MillWorks-vi6ojwow that’s more than would have thought. Looks cool tho, and that’s the point anyways haha
How does it run suppressed?
Haven’t run it suppressed. I’ve run 10.5 MK18s suppressed with Surefire and DeadAir cans…just super gassy
The only thing that kinda kills it is the high rise mount for the eotech. Take that off and run it cowitness and you got a solid build
Riser helps if I aim with NV on
I know. It is one of those things that people are going away from IR lasers being the enemy now has them
@@Flashhideronly wtf are you talking about
@@cuylercronin I’m assuming you are new to guns in this case. That riser makes the eotech that is already high up over the bore of the rifle even higher, somewhat better if your shooting with night vision on, but it is a CQB optic and in CQB as it sits with the mount, makes you have large hold overs and also screws up your cheek placement for fast shooting. So there are a lot of downsides to the mount with a few up sides to it. If you have any questions feel free to ask and myself and the team can get you set up correctly so you don’t spend lots of money on bad set ups and develop bad shooting habits
@@Flashhideronly yeah I run a unity riser for my eotech on my 10.3 build but I wouldn’t run anything high on my longer guns. Love high mounts, way more comfortable to shoot just have to practice and know your hold overs.
Wanting to build a new sbr for work I came across the clone scene and I definitely want to do something similar. However my current parts list includes the ris2, a colt upper, rc2. And I also have a Unity mount and t2. So unsure if there are other clones that would align with what I already have. The reason I went with t2 instead of Eotech was for the Unity built in rear sight. But the option of just removing the qd to access the buis was always in the back of my head.
Honestly I Fully watched the video and you’re going out to 300? CQB in my book but a 14.5 can easily get pushed out to easily 600 yards you’ll have a 100 Moa drop…. understand no it is 0 to 77 and you use 62 grain your holes are going to be extremely different then again you’re running a eotech Can be used to judge distance but not the best for 3-600 I would try out some sort of LPVO set up …. I have a build w a CHF CL Centurion Arms Socom profile barrel .0615 gas port pre pinned and tabbed similar to DD mk12 block also is pre dimpled and a tight gas block fit it is in my book a better barrel as I wasn’t going for cloning but did want the heavy so on barrel the pinned the block and polished the m4 feed ramps 480 bucks later…. Throwing i. A geissele super 42 braided buffer h2 w their Grey buffer tube have radian and geissele lower parts and trying the ssp trigger out and waiting… I might do an acog RMR combo or a no nightforce atacr 1x8
I have rifles for pushing out past 300…so this isn’t something I use to shoot out past 300 and PID is a big factor in limiting the max distance.
Why would u run so many switches look at the firearm as OK what am I gonna be doing with this how am I gonna be most comfortable is there going to be a white light accidental discharge I do not understand why you have a duel switch Plus a white light switch the only reason I could be thinking is if you have it switched it like an IR mode or something but it’s still A lol overboard with the wires at most out run a cloud defensive mode DS 07 And with IR all you really have to do is thumb it on top
It works for me. DBALA3 has the ability to have Vis and IR readily available to be fired through two separate switches. It’s an easy system to work and one I’ve worked with for a while now.