@@madcatz3d let me just say this case airflow isnt that great cable managment too ill say this its a perfect case when on a budget but if u have a little more invest in a better case 9/10 rating the build turned fine too
Yeah i bought this case as a budget option years ago and upgraded mty hardware, and looking at the case, i think i need a new case. The airflow is terrible, i did some testing and with the side panel off i get 10-12 degrees celcius cooler performance which means this case with the panel on is just choking itself. Some front case fans should perhaps work, but 1 there is little to no room and 2 i really wonder where they are going to take their air from. Maybe remove the front LED panel, buy a mesh and call it a day, but idk.
Bought this case recently. Lightweight build quality. Glass side not a particularly good fit. SD card reader was not there. I sent it back for a refund when the LED lights failed after a few hours. For the same money, I bought a good CIT case with a 500watt power supply, space for a CD ROM on the front and much better build quality.
Not the best! But if you use a fan with better SP (static pressure) (the CFM Number, the higher the better*) then it will be just fine. Maybe a Noctua N12?
What if I drill some holes in the acrylic side panel, would it help airflow Got rx 6600 xt and ryzen CPU in this case, worried they'll get hot and fail before their time
are SP Fans better for the vents on the top of the PSU and HDD shroud? I'm quiet new to pc building and this is my current case. I plan to buy an 240 AiO to be installed on the front. And the vent on the top of the case is quiet tight. The 120mm fans could not fit well because of the CPU cable connected at the top part. My Motherboard is MSI B450M Mortar Titanium.
Great question! I would personally use SP fans entirely on this case. Anything over 50 cfm would be ideal especially using a AIO. ID-Cooling to some great cheap SP fans XF-12025’s also I did struggle with some fans at the top and rear mounts as some are thicker than others. Also the same said fans are on the ID-Cooling ZoomflowX AIO cooler, so you could bye that and a pack of 3 fans and your sorted! However there is a very good airflow case for under £35 if your in the UK from Kazza on amazon. Please let me know if this works.
A little late to the party, but I've built that same system except a 6gb gpu instead, and it runs just fine, though it's also set up on a desk in a 65F room, so that might have some effect
I don't know if that RGB power cable is called SATA but can I only connect the RGB power cable and not the 3-pin while being able to control the modes?
I haven't purchased a case in twenty years I usually modify old ones and make them useful but I'm out of cases and time to build from scratch so this one may do
I know this video is really old but this is the case I have and was wondering if I kept the cpu and it has the stock fans from intel and such I have a i7-7700k and rx-580 but they cheaped out on everything else and was wondering could I upgrade all of that in this case?
You can maybe go as high as a RTX 2070! But may I suggest you buy a High Static Fan like a Noctua D12 for the front bottom to really such in as much air as possible? Maybe if you can afford it? One for the back too? They are whisper quiet but move so much air the system will stay really nice and cool but look great! If you want RGB on the rear fan you can opt for a Halo Fan cover to give it bling! There are other cheaper alternatives if you would like me to compile a list of good airflow fans for you
@@JezyYT I was gonna get another computer and might be getting a 2080ti, 3700x was gonna get the new 3000 cards but as you know from the stock and stuff from this pandemic and sure! I don't go to well with heat and have fainted a few times since I have two monitors also but will be moving into a bigger room soon so could use the most performance and better cooling so for the pre-built was thinking a 2060. Fans I could use some help on since yeah new to tech side and if and would like as many as I could add and with decent cooling and of course rgb it has zero this case haha
Do you think that the B450 aorus pro WiFi motherboard will fit in this case? I want to build a pc and I’ve been looking at this case and I am worried that my motherboard will not fit.
if you are talking about the front RBG i was also confused at first but it is just a sata cable from the front panel that connects directly to the power supply. I am not a big fan of it as all of the RGB in my case is connected and can be sunk minus the front panel. i also saw people not being able to turn off their front RBG but if you just hold down the LED button on the front of a couple seconds it will turn off.
I'm housing a 7700k with radeon 7. This thing, once built looks very nice. Feels more expensive paired with some RGB fans. The SD reader is a nice touch for a cheap purchase. Air flow is pretty good too.
I have a msi 5700xt gaming x (pretty toasty card) and it runs no hotter than 80°C. My fan setup is 3 front, 1 gpu and 2 exhaust. I think it shohld be fine
2023 REVIEW: Anyone coming to this comment section in 2023 be forewarned that this case as pretty subpar airflow. I am running a liquid cooled ryzen 7 5700x (with a 240mm radiator mounted behind the front panel) and a 3060ti. This thing got HOT when I first built it (60C idle, 88 under 100% load) because the hot air was just hitting the front panel like a walland getting trapped in the case. The only **affordable** solution I could think of for this was to cut some holes in the front to let the air passing through radiator and expel somehow. Came out pretty good and temps are reading more normal (45C idle, 65 under 100% load.) If you’re trying to budget and don’t want to dump money on a GPU cooler as well, this method of customization makes this case pretty viable all around, or if you don’t care about aesthetics you can just remove the front panel all together to let the air escape. 7 out of 10.
thanks mate, appreciate it. I have this case for about 4 years now and looking to see whether i can upgrade hardware in this thing. Can you install 2/3 front fans and remove the front panel and put a magnetic mesh filter on it, would that work?
If you put a SP fan at the bottom of the front mounting area you can pull in some average air! But keep an eye out for my review on the upcoming Pro version
Ok so i'm new to PC builds, I have this case with a single exhaust fan at the rear above my graphic card, I'd like to add 2 rgb fans to the bottom black grill thing (rgb makes stuff run better obv) my question is which way should the air flow be, and where do I plug the fans in to get power?
Depends on the fans! May a Suggest different fan placement for optimal airflow and better looks? Place the stock fan in the front in the bottom position, 1 RGB fan on the roof of the case and one at the back. Each fan will plug into either Molex, Sata, Controller or a motherboard header! Need any assistance? Fee free to message me Via the Jezy_Official Facebook page
Safistic yes, look at the front of the case, at the bottom where you see the vents, put your hand under the front of the case and you will feel a large cutout about the size of your hand? Grab the case here and maybe rest some body weight on the rest of the case and pull! Not violently!!!! As you will break the friction fittings. Give it a pull and upwards, if it doesn’t come off do it harder until it does! Then to put it back on! Just put into place and use your palm and with reasonable force (about the same force you use knocking a door) whack in the fitting locations for it to clip back in place. If you would like additional support with a video demonstration? Drop a request to me on the Jezy_Official facebook page. Take care
greetings my friend my name is phil I am the funniest unfunny guy and from twitter I am now your newest youtube channel subbie I am trying to make the planet laugh have a philnominal day
x1.25 playback speed
thank me later
Lol 😂
Lmao
It actually works
it works lol
im sad i saw this after the vid, no offense jezy this was a great vid
How do you remove the back panel? I’m struggling to install the PSU
Fionn slide it
@@BryKriTri A bit late considering this comment was a year ago.
could you please tell me how to setup and connect the leds
just brought this case getting it tommorow
How was it?
@@madcatz3d let me just say this case airflow isnt that great cable managment too ill say this its a perfect case when on a budget but if u have a little more invest in a better case 9/10 rating the build turned fine too
Where do u mount the hardrive
Potential Gaming Hows it been serving you in the long run?
Yeah i bought this case as a budget option years ago and upgraded mty hardware, and looking at the case, i think i need a new case. The airflow is terrible, i did some testing and with the side panel off i get 10-12 degrees celcius cooler performance which means this case with the panel on is just choking itself. Some front case fans should perhaps work, but 1 there is little to no room and 2 i really wonder where they are going to take their air from. Maybe remove the front LED panel, buy a mesh and call it a day, but idk.
Can a 240mm addressable liquid cooling system fit in this case?
Pc part picker says that the dark rock is 159.4 mm but says the case only allows 155 mm. Which is the correct number? Thanks.
Did u found the answer? Because i got mugen 2 that need some love and im considering this case.
Adam F Its 155 mm to the acrylic “glass” my cooler is 156 mm and touches the glass but it fits.
@@koldpizza7152 Oh no XD my cooler is 158mm and i already payed for this case.
Bought this case recently. Lightweight build quality. Glass side not a particularly good fit. SD card reader was not there. I sent it back for a refund when the LED lights failed after a few hours. For the same money, I bought a good CIT case with a 500watt power supply, space for a CD ROM on the front and much better build quality.
Maybe you didn't connect correctly the hd+ and audio+ pins
@@nixussayzer9688 I connected everything correctly. The electrics failed. It was a substandard case so it was returned.
What do u think about the intake in the front
Is it open for the air to flow in?
Not the best! But if you use a fan with better SP (static pressure) (the CFM Number, the higher the better*) then it will be just fine. Maybe a Noctua N12?
What if I drill some holes in the acrylic side panel, would it help airflow
Got rx 6600 xt and ryzen CPU in this case, worried they'll get hot and fail before their time
any updates?
@@MUSTAFK didn't go through with it but I did change the CPU cooler with a thicker one, temps seem to be normal, playing Darktide, cp77
Will work but not well
are SP Fans better for the vents on the top of the PSU and HDD shroud? I'm quiet new to pc building and this is my current case.
I plan to buy an 240 AiO to be installed on the front.
And the vent on the top of the case is quiet tight. The 120mm fans could not fit well because of the CPU cable connected at the top part. My Motherboard is MSI B450M Mortar Titanium.
Great question! I would personally use SP fans entirely on this case. Anything over 50 cfm would be ideal especially using a AIO. ID-Cooling to some great cheap SP fans XF-12025’s also I did struggle with some fans at the top and rear mounts as some are thicker than others. Also the same said fans are on the ID-Cooling ZoomflowX AIO cooler, so you could bye that and a pack of 3 fans and your sorted! However there is a very good airflow case for under £35 if your in the UK from Kazza on amazon. Please let me know if this works.
Looking into this case, thanks for the video!
EDIT: Ordered the case, it coming tomorrow.
Thanks again!
Np 👍🏻
How it's doing
@@CorneliusHaas Still one of the best cases I've ever used.
@@JezyYT why an what u used before
@@JezyYT cyclon or rift
Bro is the stock exhaust fan enough? I'm on a 1060 3gb and ryzen 5 2600 and no plans of overclocking anything what so ever
Yes definitely! I would suggest going for a roof fan if you upgrade your GPU
A little late to the party, but I've built that same system except a 6gb gpu instead, and it runs just fine, though it's also set up on a desk in a 65F room, so that might have some effect
U can do a fan in the front
@@JezyYT just one in the roof would be OK with a rtx 2060 super?
I don't know if that RGB power cable is called SATA but can I only connect the RGB power cable and not the 3-pin while being able to control the modes?
Good review, getting close to 8K subs! 👍
Woop woop
@Jezy Does this cabinet fit a: Thermaltake Smart RGB 600w power supply?
I haven't purchased a case in twenty years I usually modify old ones and make them useful but I'm out of cases and time to build from scratch so this one may do
I ordered it yesterday it comes in 3days im so hyped
@@itsallgoodman1244 yeah I have it, I don't recommend it
I know this video is really old but this is the case I have and was wondering if I kept the cpu and it has the stock fans from intel and such I have a i7-7700k and rx-580 but they cheaped out on everything else and was wondering could I upgrade all of that in this case?
You can maybe go as high as a RTX 2070! But may I suggest you buy a High Static Fan like a Noctua D12 for the front bottom to really such in as much air as possible? Maybe if you can afford it? One for the back too? They are whisper quiet but move so much air the system will stay really nice and cool but look great! If you want RGB on the rear fan you can opt for a Halo Fan cover to give it bling! There are other cheaper alternatives if you would like me to compile a list of good airflow fans for you
@@JezyYT I was gonna get another computer and might be getting a 2080ti, 3700x was gonna get the new 3000 cards but as you know from the stock and stuff from this pandemic and sure! I don't go to well with heat and have fainted a few times since I have two monitors also but will be moving into a bigger room soon so could use the most performance and better cooling so for the pre-built was thinking a 2060.
Fans I could use some help on since yeah new to tech side and if and would like as many as I could add and with decent cooling and of course rgb it has zero this case haha
How many fans does it come with?
How did you open the front part where the led thing is? did you pull it? Did you unscrew something?, I want to put 2 fans on the front please help.
There in a lip in the bottom of the front panel, you pull it forward with the case standing normally. Don’t pull too hard and break the clips though!
Jezy I’ll try that thanks
Grab from the bottom and pull
I'll be ordering the case in the weekend. I'm asking if 1x 140mm intake fan is enough for RTX 2060 and ryzen 5 2600?
Thx
Yes front, bottom mount ans the exhaust will be fine
@@JezyYT Thx
How do you connect the rgb?
Sata cable that connects to the power supply
@@bradleyadair5308 lol I feel stupid asking that question now that I’ve owned the case for so long
I’ve seen other reviews on how th top of the case can flex. Is this true
No, just a tiny bit
probably shouldnt be putting stuff on the top of your case...
How do you take off the front pannel PLEASE help.
i figured that out but i dont know how to connect the rgbs can you please help me?
Do you think that the B450 aorus pro WiFi motherboard will fit in this case? I want to build a pc and I’ve been looking at this case and I am worried that my motherboard will not fit.
Definitely!
Yup this is the one i have it works but you can't install a fan in the left bottom.
Can you make a video about how to take the front panel (not glass, but where the rgb strip is) i want to add fans to the front?
Still need help ?
How good is the airflow of the Case?
Trash. Very trash.
Hey i hope you reply , but where do you put that sata cable thats in the background?
I build my pc using this case but I still dont know where to plug in the rgb cable
Same
if you are talking about the front RBG i was also confused at first but it is just a sata cable from the front panel that connects directly to the power supply. I am not a big fan of it as all of the RGB in my case is connected and can be sunk minus the front panel. i also saw people not being able to turn off their front RBG but if you just hold down the LED button on the front of a couple seconds it will turn off.
Can the rear fan be relocated to the front? I want to replace it in the rear with an RGB fan. (Case arrived yesterday before rest of my components.)
Whats the best rgb fan for this case?
I’m just tryna install my front fans but I have no idea how to take off the front panel
Same bro
You pull it from the bottom gently not to hard or the clips will break
How do I take the top part off
Would the Asus H31OM-E R2.0 be compatible with this case?
why does the light on the top of my case flash blue after turning it off?
I have no idea? Very strange
Try reconnecting the power cable
I just bought this
Same
So do you only need one sata cable from the psu in order for the rgb to work?
Is this the mini one?
Do you have to put fans in the front or it’s already there?
hey jezy!
is this an asus aura case? because i want an asus aura pc.
I'm housing a 7700k with radeon 7. This thing, once built looks very nice. Feels more expensive paired with some RGB fans. The SD reader is a nice touch for a cheap purchase. Air flow is pretty good too.
How are your thermals
just got this today :) dont know how to remove front panel tho
Has clips down the inside of the front of the case
Yank it off from top left corner
Luke B Are you referring to the case? Lol
Luke B oh you said “Yank” I must have miss read
@@JezyYT where are the clips i just cant find them ._.
Can u do a video on how to remove the front panel
I don’t have the case anymore. But you pull it from the bottom with minimum force
What fan config would be best for an RTX 2060 and Ryzen 5 3600 PC? I can get up to 3 fans
4 or 3 fans should be fine but more is better
Can u make atutorial how to set up the rgb on the case
It’s very straight forward bro, plug in the Sata power connection and boom 👍🏻
Jezy where do you plug it?
@@axelescobedo6027 Plug it on the Sata connector from your PSU
what cpu cooler r u using? I wanna know whats the biggest cpu cooler i could fit in this case
Im sure I mentioned it during the video bro? Anyway! It’s the BeQuiet Dark Rock 4
@@JezyYT u prolly did but I could barely hear anything. Anyway thanks for letting me kno, fam. Keep on with the good work
Andrei Raducan welcome 👍🏻
How the hell do I remove the side panel to put in the power supply
Do you guys know how to connect the rgb
It’s button operated olu
How you connect the 15 pin sata
To a Sata connection on the power supply
will upgrading the fans be enough for lets say the new 3070 graphics card
I have a msi 5700xt gaming x (pretty toasty card) and it runs no hotter than 80°C. My fan setup is 3 front, 1 gpu and 2 exhaust. I think it shohld be fine
@@januscher7877 how did u install all those fans lol i have no room whatsoever
Can you change the colors? Or it's only this rainbow, wave mode?
You can make it 7 solid colors or 6 color changing modes
I can’t figure out how to fit my power supply in
2023 REVIEW:
Anyone coming to this comment section in 2023 be forewarned that this case as pretty subpar airflow. I am running a liquid cooled ryzen 7 5700x (with a 240mm radiator mounted behind the front panel) and a 3060ti. This thing got HOT when I first built it (60C idle, 88 under 100% load) because the hot air was just hitting the front panel like a walland getting trapped in the case. The only **affordable** solution I could think of for this was to cut some holes in the front to let the air passing through radiator and expel somehow. Came out pretty good and temps are reading more normal (45C idle, 65 under 100% load.) If you’re trying to budget and don’t want to dump money on a GPU cooler as well, this method of customization makes this case pretty viable all around, or if you don’t care about aesthetics you can just remove the front panel all together to let the air escape. 7 out of 10.
thanks mate, appreciate it. I have this case for about 4 years now and looking to see whether i can upgrade hardware in this thing. Can you install 2/3 front fans and remove the front panel and put a magnetic mesh filter on it, would that work?
Front airflow by any chance
Isn't the cooler 159mm . If so i think i could fit a 212 Cooler in mine
Yes it should fit!
Thank you for the response , best of luck
great video jezy mate keep it up
Can I install a Corsair liquid cooler on it?
Yeah only a 240mm AIO
Thanks
is the airflowing good? Will i get high temps with stock cooler on r5 2600?
If you put a SP fan at the bottom of the front mounting area you can pull in some average air! But keep an eye out for my review on the upcoming Pro version
Ok so i'm new to PC builds, I have this case with a single exhaust fan at the rear above my graphic card, I'd like to add 2 rgb fans to the bottom black grill thing (rgb makes stuff run better obv) my question is which way should the air flow be, and where do I plug the fans in to get power?
Depends on the fans! May a Suggest different fan placement for optimal airflow and better looks? Place the stock fan in the front in the bottom position, 1 RGB fan on the roof of the case and one at the back. Each fan will plug into either Molex, Sata, Controller or a motherboard header! Need any assistance? Fee free to message me Via the Jezy_Official Facebook page
Rgb lights started smoking for me, be cautious of this case
Did you plug it into a 12v header not 5v?
Jezy nope
Jezy I returned it for a new one and it worked fine, just bad luck I guess
Wdym smoking?
How did you get the print pannel off
r/boneappletea
How do I remove the front panel??
i pulled it off from the top, just be careful cuz it’s still connected to cables
How tf u take off front panel?
The little fingers gap at the bottom
Jezy should I just pull on it? I don’t wanna break it
Safistic yes, look at the front of the case, at the bottom where you see the vents, put your hand under the front of the case and you will feel a large cutout about the size of your hand? Grab the case here and maybe rest some body weight on the rest of the case and pull! Not violently!!!! As you will break the friction fittings. Give it a pull and upwards, if it doesn’t come off do it harder until it does! Then to put it back on! Just put into place and use your palm and with reasonable force (about the same force you use knocking a door) whack in the fitting locations for it to clip back in place. If you would like additional support with a video demonstration? Drop a request to me on the Jezy_Official facebook page. Take care
Safistic or you could just watch this video?! th-cam.com/video/drriWVeO5HM/w-d-xo.html
Jezy thanks Amman I appreciate it
So do I need to remove the front panel for the rgb cable
Yes
How do you take it off
@@ryz8819 I need to know this too
I have this case!
Mihai Alexandru Punei do you recommended
Mihai Alexandru Punei how many fans does it come with
@@diesel8999 only one in the back
SaaB just 1
How it's doing
Bro did we get cd drive with it
what cpu cooler did you use in this build and how tall was it? im planning on upgrading my case to this but my cooler may be too tall.
Raju123X he used the dark rock and I think it’s 155mm tall
Can I install 3 RGB fans in front after throwing that useless panel with a RGB line??!!3
Yeah 👍🏻
it’s not tempered glass, it’s acrylic
Can get both models dude 👍🏻
Can you choose what color the strips is self
Yes there is a led button on the top of the case which you can press and choose between collors and different effects
does it come with a psu ?
How can I remove the side panel for HDD installation?
Гвоздики и свеча блять в тему, в этом корпусе только комплектуху хоронить!
Is this an actual pc?
It was a Case review but some like to see a physical build in a case to get an idea of how it can look when finished
greetings my friend my name is phil I am the funniest unfunny guy and from twitter I am now your newest youtube channel subbie I am trying to make the planet laugh have a philnominal day
Good review.
Please never again pronounce it 'see-lon'
its very bad. take off the front panel and gain 20c improvement in temps LOL
This case has zero cooling ventilation
Why
I’m sorry but it’s cylon not see lon
Where’s the sad card reader
sy not see dude..
Pointless case if there’s no where to plug in mouse and keyboard. It’s on the damn top