The clutch damper can also be a candidate, but usually start here if the fluid is dirty, and think about a bypass hose for the latter if it is still an issue
In my case, it was a plastic bottle with the bleed tube sealed in the lid, and I used a pump (for inflatables) in vacuum/suck mode attached to the bottle. You can use anything that will effectively 'suck' the fluid and start the process. I do have a vacuum bleeder tool, but didn't have it to hand at the time, but you should be able to make something similar - even if it is a jar and a bicycle pump
my clutch sometimes is okay but sometimes i dont get alot power in first gear. Feel really short. Is that something what would you suggest me to change ?
If you're getting clutch slip (e.g. revs rising but the car isn't accelerating), I don't think the clutch master would resolve it. Typically, you'd expect to see symptoms of the clutch *not* disengaging - so hard to get into gear, crunching into gear etc.
I wouldn't even bother with the £30 master cylinder. It'll be broken in a year or so, if that. My dad went cheap on a master cylinder off eBay once, it broke within 6 months. As for clutch bleeding, just open the valve, put the pedal down then put your toes under the pedal and pull it up. Pump it a few times like this and the air should come out. Then lock the bleed, pump the clutch pedal 5-10 times, then open the bleed nipple again and it should be good to go.
![NONT TANONT - ดอกไม้ที่รอฝน (spring) - Reimagined [Live Session]](http://i.ytimg.com/vi/nY2PsFZFEOg/mqdefault.jpg)
This really helped me out. You're a legend!
Thanks for sharing
Thanks Matey ❤
I’ve noticed when the engine is cold I get really bad clutch judder when moving off, even when revving to 2k rpm - it’s a 1.8 ivtec any ideas? Thanks
Thank u mate i thought it was a slave cylinder but this is exactly the issue i currently having
The clutch damper can also be a candidate, but usually start here if the fluid is dirty, and think about a bypass hose for the latter if it is still an issue
Clutch damper ? Bypass hose ? What does a clutch damper do ?
Having an absolute nightmare trying to bleed mine. Please can you explain how the homemade vacuum is made? Thank you
In my case, it was a plastic bottle with the bleed tube sealed in the lid, and I used a pump (for inflatables) in vacuum/suck mode attached to the bottle. You can use anything that will effectively 'suck' the fluid and start the process.
I do have a vacuum bleeder tool, but didn't have it to hand at the time, but you should be able to make something similar - even if it is a jar and a bicycle pump
@@wheeldesire thank you 👍
my clutch sometimes is okay but sometimes i dont get alot power in first gear. Feel really short. Is that something what would you suggest me to change ?
If you're getting clutch slip (e.g. revs rising but the car isn't accelerating), I don't think the clutch master would resolve it.
Typically, you'd expect to see symptoms of the clutch *not* disengaging - so hard to get into gear, crunching into gear etc.
thanks for this info.✌🏾
2013 civic hb arabama bu parça uyumlu mu
I wouldn't even bother with the £30 master cylinder. It'll be broken in a year or so, if that. My dad went cheap on a master cylinder off eBay once, it broke within 6 months.
As for clutch bleeding, just open the valve, put the pedal down then put your toes under the pedal and pull it up. Pump it a few times like this and the air should come out. Then lock the bleed, pump the clutch pedal 5-10 times, then open the bleed nipple again and it should be good to go.