Lots of you have been asking for this kit, the Potentiometer that we use on this kit has been on backorder for months now. We promise to make a video and release it with the different types of kits once we have them. Thanks for subscribing and watching Cart Smart TV
Have you got a parts list for all you did? I know the parts may be on backorder but with a list I could start to look around at potential options? Thanks
My 1987 Club DS doesn’t move until I push the peddle down about a quarter of the way.. then it kicks and bucks . Any suggestions on where to start to trouble shoot the problem…
Here are the kits we offer - www.ecartparts.com/club-car-series-resistor-coils-to-regen-controller-conversion-kit www.ecartparts.com/golf-cart-series-resistor-coils-to-regen-controller-conversion-kit-1266a-curtis - Let us know if we can help. 276.632.8905
Great Job man I love old DS carts. Quick question if I may.. . I've got a 1960 "Turf Rider IV" golf cart with the original 36v DC motor (GE) that is strong and quiet. Unfortunately I can't tell what is wrong with the "controller" and when I say controller I mean 3 resister coils a 8 relay solenoids that are connected to a "throttle box" ... and when I say throttle box I mean an exposed ascending series of brass tabs that come in contact with a solid brass bar on the Go pedal linkage. Is there any way to use a modern controller with the old GE motor? Thanks!
I would like to add to his question. Back to if the original motor will work. i have a vintage golf cart. I want more speed just was wondering if i upgrade to solid state keeping original motor. If that would work
Hello, what youll need to do is visit ecartparts.com go to motor/controller packages and its the first listing and then just follow the instructions from there.
Quick question. Fairly new to this and looking to make some changes to my wife’s grandmother’s ‘89, as it has sentimental value, but isn’t able to adequately pull the hills in her neighborhood. I seem to have located the kit on your site, but my question is on the 36v to 48v conversion. A) is that necessary B) what is the benefit and C) what parts are needed to make that swap Thanks in advance!
Hello sir the controller is compatible with either 36v or 48v battery pack if you have 36v battery pack it is not necessary to change to 48v. The benefit is better operation of the cart more power for pulling(not crazy amount) where it would be unsafe to ride for an elderly woman to ride, plus it bring the cart up to date with the newer style technology( easier to get part for repair if ever needed. I hope this helps and give us a call we can help you get the proper kit for installation and the only extra parts you will need are some self tapping screws. call the number on the website for any additional help.
Does a 1990 club car ds have the same solenoid system? Found a 36v one that "only needs batteries" according to the seller. I don't care much about speed but I need torque. Small hills, bumps, pulling deer and hogs out of the woods and using it for filling feeders etc. It's a cool little cart for$1200. Wondering if it would be worth it? Or more work and $$ than just buying a newer one.
Question can i take the old cart just use my v slide accerator put a new controller an make it run? just use the controller to bypass the resistor coil
Can you elaborate on what you had to do or what you had to buy to switch from the resistor to the solid state? Or is there a company that sells the parts to do it?
You have to get a *Pot Box or Potentiometer which tells the controller where the gas pedal is. We are currently putting together a complete kit that anyone can buy. mygolfcartshop.com
Yes we still sell those also each. In most cases its only one of them that burns up. Feel free to call us for help if needed. 276.632.8905 Here is a link to what we have..www.ecartparts.com/speed-control
would like to seen complete video of each step that would have made this channel get 100's thousands of hits...instead of just saying we put this Potentiometer in golf cart to showing how you did that to upgrade the cart..i looked at the site not sure which Potentiometer i would need to do the upgrade what all the parts i would need ect....
We understand, We were in a rush getting this one done for a customer. We promise on the next one we will break it down step by step details and the parts you would need. Right now our vendors are out of the potboxes. We are now trying to put together a whole kit to make it easier also, You can also contact us with any questions or help.
OK so there are several different price ranges it all depends on what you want it to do this particular cart was beefed up pretty good and he was just under $3000 but again this cart had high speed motor and 600amp controller roughly stock price is $1600 give or take a few hundred we are in the process of getting a parts list made for stock setups.
@@enriqueramos4132 So what is your reason or interest in this kit? Most install this due to low power and or/torque or burning up resistor coils...etc... But to answer your question on some carts you can use your motor depends on what you have?
Lots of you have been asking for this kit, the Potentiometer that we use on this kit has been on backorder for months now. We promise to make a video and release it with the different types of kits once we have them. Thanks for subscribing and watching Cart Smart TV
Any updates?
Have you got a parts list for all you did? I know the parts may be on backorder but with a list I could start to look around at potential options? Thanks
www.ecartparts.com/club-car-series-resistor-coils-to-regen-controller-conversion-kit
Hi, We are waiting for our kits to come in. We will notify you all once they come in. It's like everything else at the moment, parts are on the way.
is there a parts list? i would like to do the same thing...
Give us a call.
www.ecartparts.com/club-car-ezgo-yamaha-series-resistor-coils-to-regen-controller-conversion-kit
My 1987 Club DS doesn’t move until I push the peddle down about a quarter of the way.. then it kicks and bucks . Any suggestions on where to start to trouble shoot the problem…
Give us a call 276.632.8905 we can help for sure.
What motor did you use and did you change Forward and Reverse switch?
th-cam.com/video/p0cn1sxy8zs/w-d-xo.htmlsi=ym3ZqFluAe5pIHiW
Thanks for the video. Will the motor that comes in one of the kits work for a 1984 Club Car DS?
Here are the kits we offer - www.ecartparts.com/club-car-series-resistor-coils-to-regen-controller-conversion-kit
www.ecartparts.com/golf-cart-series-resistor-coils-to-regen-controller-conversion-kit-1266a-curtis - Let us know if we can help. 276.632.8905
Great Job man I love old DS carts. Quick question if I may.. . I've got a 1960 "Turf Rider IV" golf cart with the original 36v DC motor (GE) that is strong and quiet. Unfortunately I can't tell what is wrong with the "controller" and when I say controller I mean 3 resister coils a 8 relay solenoids that are connected to a "throttle box" ... and when I say throttle box I mean an exposed ascending series of brass tabs that come in contact with a solid brass bar on the Go pedal linkage.
Is there any way to use a modern controller with the old GE motor? Thanks!
In most of those carts we start with the primary solenoid (drivers side). We could help you over the phone if you have a volt meter. 276.632.8905
I would like to add to his question. Back to if the original motor will work. i have a vintage golf cart. I want more speed just was wondering if i upgrade to solid state keeping original motor. If that would work
Where are you guys located at??
Martinsville virginia
Do you have a conversion kit for a 36v 1978 Harley Davidson DE-40 cart?
We could probably make one up for you. We would need to see pictures of what you have. Can email to contact@ecartparts.com
Do the Curtis SepEX controllers work with series wound motors?
No sir, the Sepex will only work on the Sepex / Regen systems.
Hey y'all. I see the most recent update is from about 3 months ago. Any luck on getting a kit together yet?
Hello, what youll need to do is visit ecartparts.com go to motor/controller packages and its the first listing and then just follow the instructions from there.
fixing a 1999 DS Precedent Club Car, i was wondering what the black button is to the left of the brake pedal? Thanks in advance
Typically its a horn button or some guys wire up an old school headlight dimmer switch.
Quick question. Fairly new to this and looking to make some changes to my wife’s grandmother’s ‘89, as it has sentimental value, but isn’t able to adequately pull the hills in her neighborhood. I seem to have located the kit on your site, but my question is on the 36v to 48v conversion. A) is that necessary B) what is the benefit and C) what parts are needed to make that swap
Thanks in advance!
Hello sir the controller is compatible with either 36v or 48v battery pack if you have 36v battery pack it is not necessary to change to 48v. The benefit is better operation of the cart more power for pulling(not crazy amount) where it would be unsafe to ride for an elderly woman to ride, plus it bring the cart up to date with the newer style technology( easier to get part for repair if ever needed. I hope this helps and give us a call we can help you get the proper kit for installation and the only extra parts you will need are some self tapping screws. call the number on the website for any additional help.
roughly what did that cost i have a 97 Yamaha 36 volt
Sorry for the delay, These kits range from $1200 - $1800 depending on what you're looking for.
Can you guys put the list of items you put in this golf cart ? I can’t find it on the website. Please
ecartparts.com
Does a 1990 club car ds have the same solenoid system? Found a 36v one that "only needs batteries" according to the seller. I don't care much about speed but I need torque. Small hills, bumps, pulling deer and hogs out of the woods and using it for filling feeders etc. It's a cool little cart for$1200. Wondering if it would be worth it? Or more work and $$ than just buying a newer one.
It might be ok but, once you add $6-700 in batteries you're close to 2k and might come out better getting a newer solid state cart??
Question can i take the old cart just use my v slide accerator put a new controller an make it run? just use the controller to bypass the resistor coil
You would have to use a wiring harness that is compatible with the 98-99 year model club car and the proper curtis controller
Can you elaborate on what you had to do or what you had to buy to switch from the resistor to the solid state? Or is there a company that sells the parts to do it?
You have to get a *Pot Box or Potentiometer which tells the controller where the gas pedal is. We are currently putting together a complete kit that anyone can buy. mygolfcartshop.com
@@cartsmarttv You get this kit together yet? I was looking on the site but didn't see anything. I've got an 85 Club Car DS I'm looking to upgrade.
Like others, would love to see a parts list. Thx
Coming soon! Been waiting on suppliers to send product for us to build kits. keep check here for all updated concerning conversion. Thank you
is it possible for me to purchase a resistor assemble from you I do not have much $$
Yes we still sell those also each. In most cases its only one of them that burns up. Feel free to call us for help if needed. 276.632.8905 Here is a link to what we have..www.ecartparts.com/speed-control
Where can I buy this
We are currently putting together a complete kit that anyone can buy. mygolfcartshop.com
any way you could send me the kit and all the parts you used
www.ecartparts.com/club-car-series-resistor-coils-to-regen-controller-conversion-kit
would like to seen complete video of each step that would have made this channel get 100's thousands of hits...instead of just saying we put this Potentiometer in golf cart to showing how you did that to upgrade the cart..i looked at the site not sure which Potentiometer i would need to do the upgrade what all the parts i would need ect....
We understand, We were in a rush getting this one done for a customer. We promise on the next one we will break it down step by step details and the parts you would need. Right now our vendors are out of the potboxes. We are now trying to put together a whole kit to make it easier also, You can also contact us with any questions or help.
@@cartsmarttv can you sell me all that you took off that old cart i have a old cart needs that
We have just uploaded a step by step video.
And the cost is
OK so there are several different price ranges it all depends on what you want it to do this particular cart was beefed up pretty good and he was just under $3000 but again this cart had high speed motor and 600amp controller roughly stock price is $1600 give or take a few hundred we are in the process of getting a parts list made for stock setups.
www.ecartparts.com/club-car-series-resistor-coils-to-regen-controller-conversion-kit
Where are you guys located ?
Martinsville, VA
Is there any videos that show the actual connection from the controller to the motor wiring etc
And is it possible to use the same motor , My 36 volt seem to have pretty good torque and it's holding strong
@@enriqueramos4132 So what is your reason or interest in this kit? Most install this due to low power and or/torque or burning up resistor coils...etc... But to answer your question on some carts you can use your motor depends on what you have?
@@enriqueramos4132 We don't have any as it depends on which controller and motor. We help you with the kit if you chose one.