Do you still use the panda l1800 as a buisness Have they held up for you Hinest opinion please Im torn there is so many good and bad comments the good seems to be by utubers that get a commission if you buy one
My print looks great when I press it onto the shirt. But there's always a ring of the powder around the image and it's especially noticeable on dark (black) t-shirts. How can I avoid this???
Great video . Very informative. Just curious . How many washes do you think dtf can sustain without losing its quality? Can you compare with Screen printing? How durable is it on tshirts?
Super good Question!!! I would say around 50-100 washes depending on Logo Size and Quality of materials! Screen Printing if done properly can easily withstand like 200-400 Washes
Lots of good info on here, but the video is really hard to watch with so much movement. It actually gave me motion sickness. Just wanted to bring that to your attention, as maybe it can be prevented for future videos.
question .. after applying powder on dtf print how long can we wait to cure? I ask because my curing process is done outsdie for ventilation and it would be so time saving if i can print and powder several prints before taking them all outside to cure.
I'm actually at work so I don't know if you covered this. People please be mindful not to put the adhesive side down on your DTF oven. My dumbass did it twice
hi. love your videos. g8t and thx heaps. recently have a dtf printer, still learning. a few issues and i hope you could help. first, usually use black tshirts with white coilur printing. once print the tshirts, white becomes a bit of dark white, not white white. second, print black thsirts with multiple colours and wash once and the printing fading and looked very old. only once. i am using cheap chinese inks and dtf film. have u had these problems?
There you go! you answered your own question. ONLY use the BEST INKS, POWDERS, FILMS, and OTHER ACCESSORIES. When DTF Printing, we made that same mistake at the beginning and even made a video about using (cheap china supplies, supplies sheets, etc...)
Do you have an email? I have a printer issue and desperately need some assistance. I cannot get in touch with the DSV people i purchased my printer form and Im at a dead end. @@WHOLEPRINTING
Hey could explain why these dtf printers are so much more expensive than certain epson dtf printers? Is there a difference in quality or does it have to do with print size? Looking to get a dtf printer either L1800 or AA Prestiege, but not sure why the big price difference compared to others. Thanks in advance for any help.
Can't beleive you let someone take over your computer like that to do a basic install. Who are these "engineers"? They didn't even seem to know what they were doing. That was scary how they were just strolling through your PC
Excellent, very complete information, really helpful
Thank you! Happy printing :)
Do you still use the panda l1800 as a buisness
Have they held up for you
Hinest opinion please
Im torn there is so many good and bad comments the good seems to be by utubers that get a commission if you buy one
This is super informative! Covered all the things. Well done bro!
Happy to hear this! Happy printing bro :)
Thanks Dom this was great!!!
Love from Canada
My print looks great when I press it onto the shirt. But there's always a ring of the powder around the image and it's especially noticeable on dark (black) t-shirts. How can I avoid this???
You can try reducing the margin on your printer, however there will almost always be a white outline…
Roughly how long does it take to print a high def image on an 11x17 film? I was looking at the Panda printer but I just want to make sure before I buy
Around 20Mins
Great video . Very informative. Just curious . How many washes do you think dtf can sustain without losing its quality? Can you compare with Screen printing? How durable is it on tshirts?
Super good Question!!! I would say around 50-100 washes depending on Logo Size and Quality of materials! Screen Printing if done properly can easily withstand like 200-400 Washes
Lots of good info on here, but the video is really hard to watch with so much movement. It actually gave me motion sickness. Just wanted to bring that to your attention, as maybe it can be prevented for future videos.
Thanks for your helpful input
Hi! Great video! Is the software free and does it come with the printer?
Yes, it does!
Buy it with my link, it's directly from Amazon and comes with after-sales support!
Do you have a link for the oven?
Yes all links in description
What’s the black powder for?
Dark Prints on Dark Garments
question .. after applying powder on dtf print how long can we wait to cure? I ask because my curing process is done outsdie for ventilation and it would be so time saving if i can print and powder several prints before taking them all outside to cure.
You can wait around 10 mins I believe. Im not sure tho
@@WHOLEPRINTING thank you
@@WeirdWatchShorts you’re very welcome
Let your extension cord be at least 12 gauge wire. Yes I am an electrician
Yes good advice !
have one i can buy on amazon?
@@saintmalik5402 link in description!
@@WHOLEPRINTING thanks
Thanks man
My pleasure, happy printing !!!
I like the video I need little help..I have a DTF L1800 Epson printer ...i don't know I kend fine how the software connect to my PC
Email us - wholesprinting@gmail.com
If the oven goes into alarm mode what does that mean🧐
It means the timer has gone off!
nice . where is psd link sir
Video on how to make a page setup on my channel just search (Page Setup) on my search bar on my channel!
in addition, isnt this how supacolor makes their transfers? or am wrong?
That’s a very good question! I’m not sure...
@@WHOLEPRINTING okay thanks
blue ink is dripping while printing. how to solve this problem??
Email us - wholesprinting@gmail.com
I'm actually at work so I don't know if you covered this. People please be mindful not to put the adhesive side down on your DTF oven. My dumbass did it twice
I did not cover this... but YES good look brother!
Do you let the ink dry a little before you powder? Does it have to have a matte look before powering?
No go straight to powdering and then straight to oven.
Okay thank you.
@@IAMBLUSH you’re welcome
hi. love your videos. g8t and thx heaps. recently have a dtf printer, still learning. a few issues and i hope you could help. first, usually use black tshirts with white coilur printing. once print the tshirts, white becomes a bit of dark white, not white white. second, print black thsirts with multiple colours and wash once and the printing fading and looked very old. only once. i am using cheap chinese inks and dtf film. have u had these problems?
There you go! you answered your own question. ONLY use the BEST INKS, POWDERS, FILMS, and OTHER ACCESSORIES. When DTF Printing, we made that same mistake at the beginning and even made a video about using (cheap china supplies, supplies sheets, etc...)
@@WHOLEPRINTING oh...i git it now. thx heapd.
can the screen print be ironed on like the dtf?
no
I want to watch your videos but it makes me nauseous from the camera moving.
Thanks for the feedback!
Our new videos are better and we also keep this in mind for all future content:)
Do you have an email? I have a printer issue and desperately need some assistance. I cannot get in touch with the DSV people i purchased my printer form and Im at a dead end. @@WHOLEPRINTING
I have a problem to connect the software in my PC
Email us - wholesprinting@gmail.com
can these sheets be used in inkjet printer?
not sure don't think so
These are inkjet printers
Why does my underbase cover the whole page i want the underbase ro just cover the drawing
Are you still having issues with your under base?
Hey could explain why these dtf printers are so much more expensive than certain epson dtf printers? Is there a difference in quality or does it have to do with print size? Looking to get a dtf printer either L1800 or AA Prestiege, but not sure why the big price difference compared to others. Thanks in advance for any help.
A full on video would be best. But your paying for a lot more then just the printer. I’ll make a full video soon about this topic. Thanks:)
@@WHOLEPRINTING thanks for the response! :) what dtf printer would you recomend? Not trying to spend over 7k
@@claymayer1708 3K on Amazon? You in Canada or USA or Other?
@@WHOLEPRINTING USA
@@claymayer1708 Amazon is your best bet!
Can't beleive you let someone take over your computer like that to do a basic install. Who are these "engineers"? They didn't even seem to know what they were doing. That was scary how they were just strolling through your PC
Ahahaahah good question! I trust them, They've help me solve ALL my problems with DTF
I don't see
Can you explain what you mean?
Too hard on the eyes trying to watch this video with the camera going all over the place.
Thanks for you super kind advice!
Happy printing
Very informative video; but your video is making me dizzy…slow down !!!
DTF Q&A #4 is going to be released in a few days, stay posted I made a response lol
Too shakey
Thanks SO much for the kind feedback. Thanks for watching also!