As someone who’s only been doing this for about 5 months, all the mistakes that didn’t happen on the video have definitely happened to me. Also, now I know why a pillow is useful, ordering mine from Amazon right now.
For the times you are trying to show when something doesn't work it's just like when you take your car to a mechanic because you heard the car making a weird sound it will never replicate itself while he is around! 😆 Excellent video and fantastic information to help us noobs get going. Subscribed Thanks!
just turn the shirt inside out then press the small print for information with the pillow i have only just started and this was the best way to do the tag 100%
I appreciate your thoroughness! It's very helpful getting advice from people who have tried things, learned from their mistakes, and help others to not make the same. Saves us time and money! Also, even thought not everything went wrong as planned, it's a great message and I'll still not take any chances. Subscribed.
Thank you! We try our best to share what we can and pay it forward. I've learned a lot from our community as well. Rock On and thanks for the feedback!
Very detailed. Thank you for the video. New subscriber here and you literally just went over everything I had questions about. I am new to dtf printing and have already ran into some of these situations. Thank you for clearing these up
Thanks for sharing your knowledge, learning a great deal from your videos, we have ordered our first sheets from you guys and just pressed our first time. You guys rock
Anda menyampaikan semua detail informasi dengan sangat baik bro! saya mendapatkan banyak pengetahuan pada video ini. Satu masalah yang masih saya alami adalah saat saya melakukan press dtf pada karya seni yang banyak detail. ujung yang runcing selalu akan terkelupas kemudian. saya merasa sudah melakukan metode yang benar seperti pada video anda ini. Apakah saya perlu menyemprotkan spray lem khusus pada kaos sebelum saya press dtf itu ? dan juga jika saya menyemprotkan air ke permukaan kain sebelum saya press dtf apakah itu akan bekerja dengan lebih baik ? Terima kasih untuk semuanya. salam dari Indonesia!
Thanks so much! I’m glad the video was helpful for you! If you have any more questions or need further explanations, feel free to ask. Appreciate the support!
What is the purpose of the color bar (black line) all the way down the side? In beginners terms? Or do you have a video showing the difference with and without the color bar?
mainly used by printers to ensure consistent color quality from start to finish on your prints. It helps the printer make adjustments during the run to avoid color shifts. It’s like a color-check guide that runs alongside your design. As for a video, not sure if there’s one specifically about with and without it, but just know it’s removed before pressing so it doesn’t affect the final look on your garment! 😺
Thanks for the info.. i am new subscriber and newbie for this dtf. Just about to start this new journey and wondering to really is the best to use on a tshirt - dtf or sublimation. as of now I only bought heat press but not the rest. Hopefully soon i can decide which one i should do 😅
Welcome to the DTF world! Both DTF and sublimation are great, but they have different uses. DTF is super versatile and works on any fabric type, while sublimation is best for polyester and light-colored fabrics. Since you already have a heat press, DTF might give you more flexibility on t-shirt materials. Let me know if you want to dive deeper into the differences or how to get started with either one!
"Thank you for the tips. I have a few questions: Is it necessary to press it a second time? I followed your advice, but the edges of the design didn’t stick to the hoodie. Can I trust that the design won’t come off when washing and drying the garment?
Pressing a 2nd time helps with longevity. If they aren't sticking for whatever reason, it probably won't last through the wash. Something isn't correct in your transfers or process. Where did you get your transfers from?
pre press is recommended but not needed. Just like a lint roller, its not necessary but if you are a picky decorator or you have a linty fabric, then using a roller will help. We personally don't use a lint roller for mass production.
Thank you for the video!! I was wondering if you suggest pre-washing tops that have a lot of stretch to them that shrink after the first wash. because my transfers are peeling prematurely and I was wondering if that could be contributing to the issue. Thanks!
Haven’t started yet, but I’ve got a lot of cycling jerseys in my store and I’d like to put my logo on them. They are a blend of 80% Polyester, 14% Cotton, 6% Spandex. Will this work for dtf using a Power Press 15x15?
Great question! To outline fonts, especially in design software like Adobe Illustrator or Photoshop, you just select the text, then go to the ‘Type’ menu and choose ‘Create Outlines.’ This turns the text into shapes that stay the same no matter where you send the file, so no worries about missing fonts when the printer doesn’t have the exact one!
These are really helpful tips, thanks for educating! I have a question though, how do you get rid of moisture from your prints? We've been having some issues where our prints get this oily residue over time, even after pressing them on the shirts. We know it's the humectant component from the inks. Are we not curing the prints enough? Would love to know how you solve this issue. Cheers!
There are several factors that may contribute to oily prints. It is typically excess glycol that is left over from the inks not being cured enough. The curing process should be slow and cure times should be longer so that all the moisture evaporates from the ink. Some shorter shakers are limited in cure time. I’ve also seen that certain film retain moisture more than others. Certain inks like black are more running and may notice moisture more frequently in those prints. Lastly shipping orders with silica packages help.
DTF prints are printed from CMYK values. We calibrate and have profiles for our ink/color combos. With that said when creating artwork to send to us, we ask our customer's to use the same CMYK FOGRA39 profile if they ordered a color chart from us and want to color match. Here's a video explaining our process, everyone has a different process but this is what works for customer's to upload files to us. th-cam.com/video/0d0jpOVroiw/w-d-xo.html
Hi there im new to all this and alot of learning going on. How are you printing without dtf powder and curing it? Probably a silly question lol im going to re watch the video tomorrow as its getting late unless i missed something, any advice id be very grateful.
Not silly at all! DTF powder is what makes the ink stick to the garment when heated, so you do need it for DTF printing. Without the powder, the print won’t adhere properly. After applying the powder, you cure it (usually by heating) to melt the powder into a glue-like state, so it sticks perfectly during the pressing process. Hope that clears it up!
Do you have to change the heat setting and pressure if you have the Teflon sheet attached to the heat press like that from the beginning? I thought we'd only use the sheet for the 2nd press...
No, you typically don't need to adjust the temperature when using a Teflon sheet from the beginning. The Teflon sheet's non-stick surface serves to protect the transfer and prevents premature release, which could potentially warp the image. So, you can proceed with the same heat setting without any adjustments.
There’s a lot of printers that only take PNG and you can only save files in RGB format. As a graphic designer I know what happens when you convert RBG to CMYK. My issue is some of my prints come with that white outline you talked about, but all my images are 300dpi and they start out as 300dpi, no resizing done.
If you are seeing a white outline, how is your alignment? Are you completely calibrated? When preparing and contracting your design in photoshop, do you see a design contraction in your newly created white layer? It should show on the preview before you even print.
@@transfersuperstars I will check, but I’m almost positive everything is fine on my end. It’s weird bc on the same gang sheet the designs are fine and some aren’t. But I think it’s happening with images/text I convert from Illustrator to Photoshop.
Hey! For DTF, I’m using premium film sheets (we have a few we purchase from maybe we’ll make a video about that) that work with both hot and cold peel transfers. To get the white on top, it’s all about the underbase layer of white ink that prints first, and then the colored design prints on top of that. It ensures the colors pop, especially on dark garments. Hope that helps!
It depends on a few things. You want to try to print as much white so that it is bright but just enough so that the white ink does not pool and drip. Its the right combination that will get you a perfect transfer that is durable, vibrant, soft.
I’ve heard a lot about using sRGB instead of CMYK. Does that work? I’ve shown mock-ups to customers, and when they get their product the colors look very off. Is there a way to prevent this?
@@transfersuperstars Ok i have submitted a images in a gang sheet put when saving in canva i do the transparent background and the white is gone from the image..
Do you have the paid version of canva or free? That may affect some of the exporting features. Canva is very user friendly but we've seen a lot of times there are issues with backgrounds and lower than 300 dpi quality gangsheets. If you have your artwork ready, I recommend using the gangsheet builder on our website, you can check for backgrounds on there. www.transfersuperstars.com/products/dtf-gangsheet-builder
So what is 'enough pressure' what is the right pressure for cotton or polyester or... you said 300 degrees 7 seconds is fine for most fabrics, but what about the pressure?
Heavy pressure or if you have an air pneumatic it is 40lb psi min. The final test should be a wash test. If you have enough pressure you won't see premature wrinkles. Here's a video on pressure. th-cam.com/video/oyj0As0Bz6Q/w-d-xo.html
I've used a few DTF print shops to try and see who works for me. Everything I design is 300dpi and sent out either PDF or SVG. I keep getting white outlines in spots. What to do?
Try a better supplier. If you files are high resolution it should not have the outlines. The printer's calibration may be off. We'd love to earn your business. www.transfersuperstars.com/pages/order
We print custom designs that are customer's submit, If you don't have access to artwork, we sell premade transfers as well. www.transfersuperstars.com/collections/ready-to-press-transfers
I would say 6-1yr is safe. However I would be selective and minimize storing large solid prints. I have some dtf neck tags and pocket logos that are over 3 years old and they press perfect.
5:30 300 degree in Fahrenheit. Should be logical as 300C is too high. 17:10 tip applies to 12:08 Heat press setting, it's best to just ask your supplier if that's available. Avoid asking other DTF related company, as their machine may not be the same as yours.
Hi I just bought a dtf printer and heat press. The result is coming out very dark and dull, what could the problem be? It is not the quality I am aiming for. Watching as many TH-cam videos as I can still not sure what’s gone wrong. Any advice would be appreciated thanks
Dark and Dull sounds like a result of a printer that is not properly profiled or it could be the actual artwork. What printer are you using and are you using the same inks that originally came from the manufacturer?
My printer is new ,I'm new . Why does my print stop mid print ? Or when adjust done it just stops. Then the paper light comes on. I'm stuck ! Help!Please
Unfortunately its not available anymore. Vevor took it down after a few days on Amazon. We really like the value of it for a budget press but we just havn't been able to find it.
It was on Amazon, www.amazon.com/VEVOR-Magnetic-Semi-Automatic-Clamshell-Sublimation/dp/B0C6SW63SS?crid=2WW7BHUPGQXGI&keywords=vevor%2B15x15%2Bsemi&qid=1695743811&sprefix=vevor%2B15x15%2Bsemi,aps,128&sr=8-2&ufe=app_do:amzn1.fos.f5122f16-c3e8-4386-bf32-63e904010ad0&th=1&linkCode=sl1&tag=transfersuper-20&linkId=1641945ccce74e40577991eb3f55f90d&language=en_US&ref_=as_li_ss_tl here is a video we did on it. th-cam.com/video/2t-uaHeE7T4/w-d-xo.html
Most likely a calibration issue. the artwork is not lining up. Find a new printer or give us a try. Keep us in mind if you need a transfer provider. www.transfersuperstars.com/products/dtf-gangsheet-builder
Heat press pillow is more durable and easier to slip in for quicker production. Cardboard may also crease and that may affect the overall finished product. You don't want creases on your transfers.
Outlining fonts in Adobe Illustrator is an essential step in the design process, especially when sharing files or preparing them for printing. When you outline a font, you convert text from a font-based vector to a shape-based vector. Here's why this is important: 1. Preserving Design Integrity: Font Availability: Not every computer or printer will have the same fonts installed that you used in your design. If you send a document with live (editable) text, the receiving system might replace your chosen font with a default one if it doesn't have access to that specific font. This can alter the appearance of the text in your design. Consistency Across Platforms: Outlining fonts ensures that your text looks exactly as you intended, no matter where or how the document is opened or printed. 2. Editable Text vs. Graphic Element: Non-Editable: Once text is outlined, it's no longer editable as text. This means you cannot change the wording, font style, or font size as you normally would with text. Customization: However, outlining allows you to manipulate the text as a graphic shape. You can apply complex transformations, distortions, and other graphic effects that aren’t possible with standard text. 3. Commercial Printing Needs: File Compatibility: In professional printing, the process often requires files to be universally compatible. Outlined text ensures the text appears as intended, regardless of the fonts installed on the printer’s computers. Avoid Licensing Issues: Some fonts have licensing restrictions that may not allow them to be embedded in files shared with others. Outlining the text circumvents this issue. 4. File Size and Performance: Reducing File Size: In some cases, outlining fonts can reduce the file size, as the information about the font itself (which can be quite extensive) is no longer embedded in the file. Improving Performance: For complex documents, having live text can sometimes slow down performance. Outlining the text can improve the processing speed when working with the file. How to Outline Fonts in Adobe Illustrator: To outline text in Adobe Illustrator: Select the text using the Selection Tool (V). Go to the top menu and select Type > Create Outlines (or use the shortcut Shift + Ctrl/Cmd + O). The text is now a vector shape and can no longer be edited as text. Conclusion: Outlining fonts is a best practice in graphic design, especially for finalizing documents for sharing and printing. It ensures that your design remains consistent and appears as intended, regardless of the end user’s system configuration. However, it’s advisable to always keep an editable copy of your document before outlining text, in case you need to make changes later.
Hey Jane! Was the transfer printed in-house or from a third party? If in-house: What film type and curing process are you using? Are you peeling hot or cold? If third party: Do you know if they used glossy or matte film? What are your heat press settings?
As someone who’s only been doing this for about 5 months, all the mistakes that didn’t happen on the video have definitely happened to me. Also, now I know why a pillow is useful, ordering mine from Amazon right now.
Its definitely a learning experience with DTF! Glad you're still learning a thing or two and picked up something useful.
For the times you are trying to show when something doesn't work it's just like when you take your car to a mechanic because you heard the car making a weird sound it will never replicate itself while he is around! 😆 Excellent video and fantastic information to help us noobs get going. Subscribed Thanks!
We all start somewhere, thanks for subbing! Appreciate the feedback
I have 2 Clug ink cartridge what should I do I tried everything
It will only lift when static is present on the shirt, transfer or platen
“Demo gods” were not on his side lol. Great informative video. :)
when you are so good at your job, even when you try to mess it up still comes out good
Lol thanks! Its hard to replicate some problems. Thanks for watching the video and we really appreciate your comments
just turn the shirt inside out then press the small print for information with the pillow i have only just started and this was the best way to do the tag 100%
That works
I appreciate your thoroughness! It's very helpful getting advice from people who have tried things, learned from their mistakes, and help others to not make the same. Saves us time and money! Also, even thought not everything went wrong as planned, it's a great message and I'll still not take any chances. Subscribed.
Thank you! We try our best to share what we can and pay it forward. I've learned a lot from our community as well. Rock On and thanks for the feedback!
Very detailed. Thank you for the video. New subscriber here and you literally just went over everything I had questions about. I am new to dtf printing and have already ran into some of these situations. Thank you for clearing these up
Glad it was helpful!
Thanks for sharing your knowledge, learning a great deal from your videos, we have ordered our first sheets from you guys and just pressed our first time. You guys rock
Thank you so much!
pretty interesting; thanks for sharing your knowledge and mistakes to avoid when working with DTF. Very useful and well explained.
Glad it was helpful!
totally burst out my laugh to your expression when you trying to mess up the print and still works... Thank you for the advice
haha we're trying to replicate problems, they don't always happen lol
When you're attempting to demonstrate how something might appear messy or chaotic, yet ultimately turns out great
haha it happens all the time, when you want replicate an issue and it just doesn't do it.
Insightful information. I have experience some of the mistakes you talked about. That's why I keep looking for good tutorials and you just nailed it.
Glad it was helpful!
Anda menyampaikan semua detail informasi dengan sangat baik bro! saya mendapatkan banyak pengetahuan pada video ini. Satu masalah yang masih saya alami adalah saat saya melakukan press dtf pada karya seni yang banyak detail. ujung yang runcing selalu akan terkelupas kemudian. saya merasa sudah melakukan metode yang benar seperti pada video anda ini. Apakah saya perlu menyemprotkan spray lem khusus pada kaos sebelum saya press dtf itu ? dan juga jika saya menyemprotkan air ke permukaan kain sebelum saya press dtf apakah itu akan bekerja dengan lebih baik ?
Terima kasih untuk semuanya. salam dari Indonesia!
Thanks so much! I’m glad the video was helpful for you! If you have any more questions or need further explanations, feel free to ask. Appreciate the support!
Thanks for sharing great tips but what is the right temp and time for C° heat press?
We keep our heat press settings around 150c or 300f for our transfers.
What is the purpose of the color bar (black line) all the way down the side? In beginners terms? Or do you have a video showing the difference with and without the color bar?
mainly used by printers to ensure consistent color quality from start to finish on your prints. It helps the printer make adjustments during the run to avoid color shifts. It’s like a color-check guide that runs alongside your design. As for a video, not sure if there’s one specifically about with and without it, but just know it’s removed before pressing so it doesn’t affect the final look on your garment! 😺
Very detailed, thank you!
Glad it was helpful! It look awhile to put together enough samples to make a good video for you guys. Appreciate you checking it out. Thanks again.
Thanks for the info.. i am new subscriber and newbie for this dtf. Just about to start this new journey and wondering to really is the best to use on a tshirt - dtf or sublimation. as of now I only bought heat press but not the rest. Hopefully soon i can decide which one i should do 😅
Welcome to the DTF world! Both DTF and sublimation are great, but they have different uses. DTF is super versatile and works on any fabric type, while sublimation is best for polyester and light-colored fabrics. Since you already have a heat press, DTF might give you more flexibility on t-shirt materials. Let me know if you want to dive deeper into the differences or how to get started with either one!
The information you shared & demonstrated in this video was excellent! Thank you!
You are so welcome!
"Thank you for the tips. I have a few questions: Is it necessary to press it a second time? I followed your advice, but the edges of the design didn’t stick to the hoodie. Can I trust that the design won’t come off when washing and drying the garment?
Pressing a 2nd time helps with longevity. If they aren't sticking for whatever reason, it probably won't last through the wash. Something isn't correct in your transfers or process. Where did you get your transfers from?
Great information. What about pre-heat and lint roller on the t-shirt?
pre press is recommended but not needed. Just like a lint roller, its not necessary but if you are a picky decorator or you have a linty fabric, then using a roller will help. We personally don't use a lint roller for mass production.
I find turning shirt inside out works way better with neck tag
That's a great tip! Thanks for sharing.
Thank you for the video!! I was wondering if you suggest pre-washing tops that have a lot of stretch to them that shrink after the first wash. because my transfers are peeling prematurely and I was wondering if that could be contributing to the issue. Thanks!
First thing I would suggest is looking at your press and pressure setting, which heat press are you using?
rasterme tool for photoshop can halftone any image with 2-3 clicks, it's a game changer for DTFs
I'm going to check that out, Thank you
Thank you! Very valuable info🎉
Keep us in mind if you need a transfer provider. www.transfersuperstars.com/products/dtf-gangsheet-builder
Haven’t started yet, but I’ve got a lot of cycling jerseys in my store and I’d like to put my logo on them. They are a blend of 80% Polyester, 14% Cotton, 6% Spandex. Will this work for dtf using a Power Press 15x15?
Yes they work fine with jerseys. Keep us in mind if you need a transfer provider. www.transfersuperstars.com/products/dtf-gangsheet-builder
How to outline font?
Great question! To outline fonts, especially in design software like Adobe Illustrator or Photoshop, you just select the text, then go to the ‘Type’ menu and choose ‘Create Outlines.’ This turns the text into shapes that stay the same no matter where you send the file, so no worries about missing fonts when the printer doesn’t have the exact one!
These are really helpful tips, thanks for educating!
I have a question though, how do you get rid of moisture from your prints? We've been having some issues where our prints get this oily residue over time, even after pressing them on the shirts. We know it's the humectant component from the inks. Are we not curing the prints enough? Would love to know how you solve this issue. Cheers!
There are several factors that may contribute to oily prints. It is typically excess glycol that is left over from the inks not being cured enough. The curing process should be slow and cure times should be longer so that all the moisture evaporates from the ink. Some shorter shakers are limited in cure time. I’ve also seen that certain film retain moisture more than others. Certain inks like black are more running and may notice moisture more frequently in those prints. Lastly shipping orders with silica packages help.
@@transfersuperstars Thanks for taking the time to respond. I really appreciate it. Looks like we have to go back and adjust our settings.
Why you use a Offset color profile for digital print? For best colors, you need a custom RGB or CMYK profile made for DTF.
DTF prints are printed from CMYK values. We calibrate and have profiles for our ink/color combos. With that said when creating artwork to send to us, we ask our customer's to use the same CMYK FOGRA39 profile if they ordered a color chart from us and want to color match. Here's a video explaining our process, everyone has a different process but this is what works for customer's to upload files to us. th-cam.com/video/0d0jpOVroiw/w-d-xo.html
Excellent content. Thank you!
You're very welcome!
Hi there im new to all this and alot of learning going on. How are you printing without dtf powder and curing it? Probably a silly question lol im going to re watch the video tomorrow as its getting late unless i missed something, any advice id be very grateful.
Not silly at all! DTF powder is what makes the ink stick to the garment when heated, so you do need it for DTF printing. Without the powder, the print won’t adhere properly. After applying the powder, you cure it (usually by heating) to melt the powder into a glue-like state, so it sticks perfectly during the pressing process. Hope that clears it up!
@@transfersuperstars thankyou I really appreciate the reply.
very clear explanation...thx u ❤
Thank you! Keep us in mind if you need a transfer provider. www.transfersuperstars.com/products/dtf-gangsheet-builder
Do you have to change the heat setting and pressure if you have the Teflon sheet attached to the heat press like that from the beginning? I thought we'd only use the sheet for the 2nd press...
No, you typically don't need to adjust the temperature when using a Teflon sheet from the beginning. The Teflon sheet's non-stick surface serves to protect the transfer and prevents premature release, which could potentially warp the image. So, you can proceed with the same heat setting without any adjustments.
thanks I liked it and it helped me but about the neck U can justturn the t-shirt around and do it easier...thanks
Thanks for the tip!
I was thinking the same thing about hoodies 😊
Which vevor are you using?
Thank you for the great information!
Glad it was helpful!
There’s a lot of printers that only take PNG and you can only save files in RGB format. As a graphic designer I know what happens when you convert RBG to CMYK. My issue is some of my prints come with that white outline you talked about, but all my images are 300dpi and they start out as 300dpi, no resizing done.
If you are seeing a white outline, how is your alignment? Are you completely calibrated? When preparing and contracting your design in photoshop, do you see a design contraction in your newly created white layer? It should show on the preview before you even print.
@@transfersuperstars I will check, but I’m almost positive everything is fine on my end. It’s weird bc on the same gang sheet the designs are fine and some aren’t. But I think it’s happening with images/text I convert from Illustrator to Photoshop.
Very helpful. Thanks.
What dtf sheets are you using? To get the white on top?
Hey! For DTF, I’m using premium film sheets (we have a few we purchase from maybe we’ll make a video about that) that work with both hot and cold peel transfers. To get the white on top, it’s all about the underbase layer of white ink that prints first, and then the colored design prints on top of that. It ensures the colors pop, especially on dark garments. Hope that helps!
Very helpful Thank you Phil
Glad it was helpful!
Awesome details and knowledge what type of printer do u use
Thank you! We used to import our printers from overseas but now we upgrade our our fleet of printers as we continue to upgrade parts.
HI,
how much white ink do you need to print, how do you adjust or calibrate that?
It depends on a few things. You want to try to print as much white so that it is bright but just enough so that the white ink does not pool and drip. Its the right combination that will get you a perfect transfer that is durable, vibrant, soft.
My Dtf prints in halftones comes in grey. not like halftone dots. maybe underneath white spot fills it?
Thanks for your time bro, much appreciated. God bless..
Very welcome
I’ve heard a lot about using sRGB instead of CMYK. Does that work? I’ve shown mock-ups to customers, and when they get their product the colors look very off. Is there a way to prevent this?
DTF printer prints in CMYK, its closer to the true color values.
Where can I get that Mario flower image??
Great Video but what if my image has to have a white background for a dark T-shirt what do u recommend for image on a gang sheet
I'm not sure what you mean but you can definitely print white and even submit white images on our website. We can print the white for you.
@@transfersuperstars Ok i have submitted a images in a gang sheet put when saving in canva i do the transparent background and the white is gone from the image..
Do you have the paid version of canva or free? That may affect some of the exporting features. Canva is very user friendly but we've seen a lot of times there are issues with backgrounds and lower than 300 dpi quality gangsheets. If you have your artwork ready, I recommend using the gangsheet builder on our website, you can check for backgrounds on there. www.transfersuperstars.com/products/dtf-gangsheet-builder
@@transfersuperstars I do have the paid version..i will check the link thank you
Np! Keep us posted.
So what is 'enough pressure' what is the right pressure for cotton or polyester or... you said 300 degrees 7 seconds is fine for most fabrics, but what about the pressure?
Heavy pressure or if you have an air pneumatic it is 40lb psi min. The final test should be a wash test. If you have enough pressure you won't see premature wrinkles. Here's a video on pressure. th-cam.com/video/oyj0As0Bz6Q/w-d-xo.html
in for the algo , thanks for the knowledge.
I ordered some magnets and changed my time/temp settings :-)
Excellent! Glad to help
what kind of ink and printer they use? can I use that ink with Epson L121, L3120 or Epson L8050?
We use a custom commercial printer. We wouldn't recommend a converted printer.
I've used a few DTF print shops to try and see who works for me. Everything I design is 300dpi and sent out either PDF or SVG. I keep getting white outlines in spots. What to do?
Try a better supplier. If you files are high resolution it should not have the outlines. The printer's calibration may be off. We'd love to earn your business. www.transfersuperstars.com/pages/order
Where can we get the DTF prints you are using? Are there any websites you recommend getting premade DTF prints?
We print custom designs that are customer's submit, If you don't have access to artwork, we sell premade transfers as well. www.transfersuperstars.com/collections/ready-to-press-transfers
Hi? How long does DTF last in storage with Silica Gel Pack?
I would say 6-1yr is safe. However I would be selective and minimize storing large solid prints. I have some dtf neck tags and pocket logos that are over 3 years old and they press perfect.
Very informative 👍
5:30 300 degree in Fahrenheit. Should be logical as 300C is too high.
17:10 tip applies to 12:08
Heat press setting, it's best to just ask your supplier if that's available. Avoid asking other DTF related company, as their machine may not be the same as yours.
300F or 150c is what we press our transfers at. We sell transfers so this is the setting we ask our users to use.
300 degrees ferenheit or celsius for 7 seconds? Out here we mostly do 160-170 celsius for 15 to 20 secs... So im just wondering about that setting...
300F is what we press most our garments at. The transfers we make are only pressed for 7s. Cold or Hot Peeled
Hi I just bought a dtf printer and heat press. The result is coming out very dark and dull, what could the problem be? It is not the quality I am aiming for. Watching as many TH-cam videos as I can still not sure what’s gone wrong. Any advice would be appreciated thanks
Dark and Dull sounds like a result of a printer that is not properly profiled or it could be the actual artwork. What printer are you using and are you using the same inks that originally came from the manufacturer?
thank you for the videos
Glad you like them!
Is there any way to buy old stock DTF from you from Italy like 100 pieces different size
We don't ship internationally at this time. Sorry!
My printer is new ,I'm new . Why does my print stop mid print ? Or when adjust done it just stops. Then the paper light comes on. I'm stuck ! Help!Please
It could be various things, what kind of printer are you running?
I wanna know what kind of ink do we need for DTF ??
You need specific INK for DTF, most importantly you need a printer with some print heads that can handle this ink. Do you have a printer currently?
What Vevor heat press are you using here? I cant find the auto open on Amazon
Unfortunately its not available anymore. Vevor took it down after a few days on Amazon. We really like the value of it for a budget press but we just havn't been able to find it.
@transfersuperstars perhaps it can be found used?? What model were you using in this video?
It was on Amazon, www.amazon.com/VEVOR-Magnetic-Semi-Automatic-Clamshell-Sublimation/dp/B0C6SW63SS?crid=2WW7BHUPGQXGI&keywords=vevor%2B15x15%2Bsemi&qid=1695743811&sprefix=vevor%2B15x15%2Bsemi,aps,128&sr=8-2&ufe=app_do:amzn1.fos.f5122f16-c3e8-4386-bf32-63e904010ad0&th=1&linkCode=sl1&tag=transfersuper-20&linkId=1641945ccce74e40577991eb3f55f90d&language=en_US&ref_=as_li_ss_tl
here is a video we did on it. th-cam.com/video/2t-uaHeE7T4/w-d-xo.html
Can you not turn the shirt inside out for the neck tag?? makes more sense
There are various ways to accomplish the neck tag. We've found it easier to just place ontop of a heat press pillow.
how do I fix white outlines in my dtf transfers
Most likely a calibration issue. the artwork is not lining up. Find a new printer or give us a try. Keep us in mind if you need a transfer provider. www.transfersuperstars.com/products/dtf-gangsheet-builder
Could I use a cardbox instead of the pillow?
Heat press pillow is more durable and easier to slip in for quicker production. Cardboard may also crease and that may affect the overall finished product. You don't want creases on your transfers.
@@transfersuperstars btw worked well with cardboard, tnx
what do you mean by they have to outline their custom font?
Outlining fonts in Adobe Illustrator is an essential step in the design process, especially when sharing files or preparing them for printing. When you outline a font, you convert text from a font-based vector to a shape-based vector. Here's why this is important:
1. Preserving Design Integrity:
Font Availability: Not every computer or printer will have the same fonts installed that you used in your design. If you send a document with live (editable) text, the receiving system might replace your chosen font with a default one if it doesn't have access to that specific font. This can alter the appearance of the text in your design.
Consistency Across Platforms: Outlining fonts ensures that your text looks exactly as you intended, no matter where or how the document is opened or printed.
2. Editable Text vs. Graphic Element:
Non-Editable: Once text is outlined, it's no longer editable as text. This means you cannot change the wording, font style, or font size as you normally would with text.
Customization: However, outlining allows you to manipulate the text as a graphic shape. You can apply complex transformations, distortions, and other graphic effects that aren’t possible with standard text.
3. Commercial Printing Needs:
File Compatibility: In professional printing, the process often requires files to be universally compatible. Outlined text ensures the text appears as intended, regardless of the fonts installed on the printer’s computers.
Avoid Licensing Issues: Some fonts have licensing restrictions that may not allow them to be embedded in files shared with others. Outlining the text circumvents this issue.
4. File Size and Performance:
Reducing File Size: In some cases, outlining fonts can reduce the file size, as the information about the font itself (which can be quite extensive) is no longer embedded in the file.
Improving Performance: For complex documents, having live text can sometimes slow down performance. Outlining the text can improve the processing speed when working with the file.
How to Outline Fonts in Adobe Illustrator:
To outline text in Adobe Illustrator:
Select the text using the Selection Tool (V).
Go to the top menu and select Type > Create Outlines (or use the shortcut Shift + Ctrl/Cmd + O).
The text is now a vector shape and can no longer be edited as text.
Conclusion:
Outlining fonts is a best practice in graphic design, especially for finalizing documents for sharing and printing. It ensures that your design remains consistent and appears as intended, regardless of the end user’s system configuration. However, it’s advisable to always keep an editable copy of your document before outlining text, in case you need to make changes later.
Okay! wow thank you so much for that information! i will take it with me when i purchase my dtf machine
@@transfersuperstars Would this be the case only with vector files? This shouldn't be an issue if the file is PNG?
there is a way for fonts, expand the text
Show us another machine
💥
Hey hru do I love your information this is AL I see your channel has grown a lot congratulations . Let's do a collaboration video
good video
Glad you enjoyed it!
So you don't have to press DTF 2 times?
Its recommend to press twice.
Why do my DTF’s appear shiny after I print?
Hey Jane! Was the transfer printed in-house or from a third party?
If in-house:
What film type and curing process are you using?
Are you peeling hot or cold?
If third party:
Do you know if they used glossy or matte film?
What are your heat press settings?
My prints on DTF are coming out dark plz help
How dark? Do you have your ICC Profile dialed down? Have you changed inks or anything?
the best
Thank you!
thnx phillybaby
You're welcome! Have a good one