Building a Big Dust Collector Blower #2
ฝัง
- เผยแพร่เมื่อ 31 ต.ค. 2016
- Want to help out?: www.patreon.com/mariushornber...
or support me through my Amazon wishlist:www.amazon.de/gp/registry/wis...
Follow me on Instagram: / marius.hornberger
Part 1, The Impeller: • Building a Big Dust Co...
Part two of the Big Blower build series. Now it's all about the blower housing and hanging it from the wall.
And of course also testing it.
Enjoy the video! - แนวปฏิบัติและการใช้ชีวิต
The author does like to from scratch, th-cam.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.
Love the percussion and the humour. Your ingenuity and creativity is showing!!
You are doing sophisticated engineering and doing it well. I like your sense of humor.
A little trick I learned from building radio controlled airplanes to strengthen bolt threads straight into wood is take thin CA "cyanocrylate" AKA Super Glue, and soak the threads with the CA. Run the tap back through the hole after after the CA dries. It will make the threads very strong, just make sure to use thin CA so that it soaks into the wood.
It is really good to see some people putting there stuff ups in videos
I love the shot at 10:35, where you can see the blower shifting boards around on your lumber racks.
I'm in awe of your shop and your design skills. You rock my stripey socks!
Your explanation of things is what separates your videos from yours peers. Keep up the good work!
your humor is refreshing and you make it fun to watch. Good job!!
You sir are a steely eyed missle man. Thank you for your creativity and ingenuity.
Watching your build videos is quite inspiring, and I love the added touch from your video editing skills.
Many folks do home brewed projects to improve their workshop; few however do it as cleanly & precisely as you do. Very well done, keep it up & look forward to your next plan. Gruss Gott.
Very thorough Marius, great attention to detail. All the best, Jim.
That was one of the best editing segments I have ever seen
Great project.
Love your craftsmanship and wit.
Just like this project, I'm a HUGE FAN of your work :)
We're all blown away by your wit
I'm impelled to agree
This thing sucks.
FANtastic project....dust sayin'
it works really wood ;-D
I really appreciate all of your builds in general. I particularly enjoy your dust collection videos. I hope that some plans are to follow. I for one would gladly pay.
The quality of the stuff that you build, Marius, is just amazing. I wish I have the hability to make things that look half as cool as yours!
Your work is just insane! Very impressive, keep going like that!
A big Up from France!
I really enjoy your videos, Marius! I get so exited when I see you have uploaded. Keep them coming! 👍🏼👍🏼
Very impressive Marius! These two videos are the first I've seen of you. Super work and a DIY level that I have not attempted. I respect your level of precision and overall craftsmanship. GOOD SHOW!
Your disclaimer states very clearly and logically where you got your metal. You will no doubt still get a flood of people complaining that after hours of searching they were unable to find a ".8mm sheet metal store". This is a good thing because it gives you practice dealing with this type of mentality. Unfortunately most of them will be clients or more likely your boss. Good luck.
Great videos - thanks -- keep them coming
Yeah, that bad bad sarcasm.
Simply amazing!! You have a huge admirer.
This is one beautifull blower. Great design and I really like the steel side.
Can you tell me where you bought the sheet of galvanized steel?
Lol
Lennard Hartman 😂😂😂😂
I'm gay.
as long as your happy lol
This was a cry for help.
My blood is on your hands.
Great work, looking forward to the next instalment.
Sooo watchable! Thanks.
My fourth time watching this blower build. Good stuff.
Your skill levels in wood working and equipment building are impressive for someone in your age bracket. I look forward to seeing how your skills grow with more experience.
Great video, clever editing, great sense of humour.
Amazing work, really well done.
Sweet stop-motion with the clamp knobs!
I really dig your approach about using stuff you have around. Never thought of making a dust fan out of wood. Nice out-of-the-box mind ;-)
I enjoy your projects and for a young fellow you an excellent builder. I wish I had your ability to do some of those things.
Job well done.
Really enjoying watching your videos, Marius! Very inspiring stuff, keep up the good work :-)
Awesome job man! Congratulations !
I just took apart a shop vac to check the impeller, and noticed how tiny it was to generate the suction it does. The impeller and blower you've made is beyond impressive.
Super creative video and I love the way you edit your stuff. Keep them coming!
Another awesome video ! Love the mix of woodworking and science :). Keep up the great work.
That Came out Very Beautiful! i really appreciate your talent for woodbuilding. you Did such a Great Job on this!!! keep up the great videos! Thanks.
Yet another excellent video! another bucket of thumbs up!
really enjoyed this one too.
I really liked the center punching scene... very well done! That must have taken a lot of time!
Oh my God you are genius with that video editing I can't even tell you how awesome that is!!!!!
Great build, Marius. Keep it up.
Cheers
Makes me wanna build one, although my shopvac works fine! Nice work, seems like zero vibrations... 👍
your ideas are great and you give loads of info
Fantastic , editing was brilliant , build was awesome , work quality flawless , results looking great . Your uploads have been amazing recently .
great explosion cover you do fine work. enjoy your work.
You have a most impressive amount of tools!!
AIR-WOLF type Hornberger :-)
Great work and thx for the outtakes, best moment -> T-shirt
Nice work, well thought out. Your quite talented!
Another fantastic project video!
Very cool man, I don't care what anyone bitches about, you are smart and not many people can say they built their own...
Marius, love your videos! Been following your channel for quite some time. Love how far you've come! Keep up the good work!
"This stuff cuts like no butter." Greatest quote ever
You just won my subscription with the video edit of you hammering!! Funny, but GREAT job!
your skills are amazing ive been a carpenter and cabinet maker for 30yrs. honestly I'm very impressed with your leval of detail and technical skills. you did a fantastic job. your parents must be extremely proud of you. enjoyed every moment. And the outtakes on your previous post. had me laughing so much I spilt tea all over my trousers. specially when your handle came off when you started to carve. I couldn't stop laughing. just brilliant. ignore the haters my friend and keep them coming and the outtakes 😂 👌👍👍👍
soviel liebe in deinen videos :) einfach schön anzuschauen danke dir!
google translater ^^
haha no german dude :)
Ratz wofür braucht man denn Google Übersetzer??
Very nice build and your noise level seems fair! I built a very similar centrifugal fan at 400mm diameter by 80mm depth and it's generating close to 100 dB of noise (android app), compared to 85db for a big shop vac. That's at full load so it's moving a lot more air that it would be once everything is hooked up.
You are a real craftsman and a funny guy.
Mvg,
Marc
Belgium
Loved your face, when the bag got full of air ;-) Must have been a great feeling. Keep up the good work.
xserv4real Yeah, you almost seemed embarrassed at your glee.
+Helge Frisenette no, not embarrassed, just a glee of satisfaction
I love the edit with the hole center punch.
Hello Marius, your work is excellent, very creative and you take care of the details. Since you improved the dust collector I recommend that you install a star delta starter, thus reducing the torque with which the engine starts and also the starting current, this will prevent the starting torque is too high and cause damage to the turbine in addition reduces energy consumption at start-up which results in energy savings and lower cost of the electric bill. The connection is simple and not very expensive, three contactors with auxiliary contacts and a pair of buttons. Congratulations for all the projects and continue to work like this.
It would be a good idea, but in a (German) comment he made in the previous video, he indicated that he runs this motor in wye configuration at all times, so a wye-delta switch to reduce starting torque can't be used.
God, I love your videos Marius. So entertaining, informative and inspiring.
great job Marius
Very nice mr a lot of work but Worth it well done 👍 thanks for your video 👏👏
Once again... Really nice work!
Killin it! Keep up the well explained break down.
Fine build.
Good luck to you always and everywhere.
very cool i like your thinking and how you approach problems and come up with solutions to solve them and most of all your funny haha
well done :) i am more an electronics guy myself. I could desgin a soft start for that motor if you want. That would take away the spin-up stress. Might as well make it variable rpm.
evil Bunny - I was going to suggest that 😉 Miele vacuum cleaners have soft-starting on their corded models
Do really like the outtakes 😊
Congrats for your vids ! So much hard work !
6:17
I love such detail in video editing
Dude impressive yet again, Keep'em coming
excellent on wearing hearing protection for everything. That will do you good in the long run
Really nice work.
DUDE! amazing work!!
I loved it when he said that the noice didn't bothered him at all but his parents said that it's much better XD
cool build
neat workshops!!
really good work
My dear friend Marius, you are awesome. Very cool, your videos make me motivated.
DUDE! SO proud to see this shit! You are the man! Your kids someday will be mind blown!
Fantastic! And a healthy amount of fear of exploding spinning things :)
Very good Work.
As far as I know a lot of the noise comes from the air circulating through the system and gets out the 90 degree exit part you have there. try to glue some of that wrapping material or some insulating foam on that part on the inside.
I accidentally was a witness of such a procedure when some industrial size fans were making too much noise for the nearby resident housings. So they brought in some dudes that did just that. they glued some kind of flexible foam material on the inside of the air evacuation ports. Also to top it all up they mounted at a distance(measurement that I do not remember) a shielding system so the air and sound coming out was hitting the shields and dispersing on the sides. the shields also had that foam material glued on. try doing that see how much the sound drops.
1:52 because of this you have earned a new subscriber. plus i love your German accent. I'm German too!
You, mister, just got yourself a subscriber. You make really good, quality videos.
In the US, that sheet metal is typically called "flashing". It's in the roofing section
The german Frank Howarth... I send you all my Respect, Buddy!
looks god damn strong and accurate 👍
Love your videos.....Kepp up the good work. Your a champ
Nice job!
12:00 thanks man, nice! and a good looking blower too :)
Man i love your editing!
Awesome video!
amazing work. good job on getting it all to fit first time. the only thing I'd advise is that you buy a soft start for the motor. they are available for as little as £60 and buying one would vastly prolong the life of your blower
You make it look easy.