Causes and Fixes P0733 Code: Gear 3 Incorrect Ratio

How to fix P0733 Code: Gear 3 Incorrect Ratio
A P0733 code is set when the computer (TCM/PCM) detects that the revolutions per minute (RPM) difference between the rotational speed of the input speed sensor and the transmission output speed sensor in 3rd gear falls outside the normal range.
Common causes for the P0733 code include low transmission fluid, a defective gear 3 shift solenoid, internal transmission failure, and a bad speed sensor.
Possible Causes of a P0733 Code:
Low Fluid - Dirty Fluid - Clogged Filter
Bad Transmission Sensor (Input - Output Speed Sensors)
Transmission Failure (Pump, Planetary Gear, Solenoid)
Wiring Harness or Bad Computer (TCM/PCM)
By using this information user assumes all risk of use.

[@lacsonsautoshop]

This video explains a lot for troubleshooting. 👌But for 5R55S transmission not gonna work. 😢

[@malcolmadams2105]

I have an Audi A-4 2004 1.8 t Quattro I’ve checked the solenoids replaced the fluids filter in the transmission But still goes into limp and won’t shift into third gear. I guess the speed sensors are next.

[@bmx.big.cheese7338]

I think I’m having this issue I’ll get up to speed passed 1 into 2 up to speed but only revs high rpm won’t shift and gain more speed into 3

[@bmx.big.cheese7338]

Not even sure how this happened my trans line broke before I bought it the guy put a hose on it so when I got into the gas the hose broke free and drained my transmission

[@bmx.big.cheese7338]

Towed it home found why it broke free to begin with then filled the trans back up to have this issue happen (master cylinder is bad putting pressure on the brakes and more strain on the engine boom hose broke off drains trans)

[@mikepettengill2706]

How far back does this code apply? 2000 Silverado show that?