I used to ride quad bikes and stripped several engines and gearboxes to try and save them. Not one of them ever ran again! Big respect to you Sir, you make it look like art!
I have a semi auto 110, I want the buy the manual 125 with electric start and kick start, I found a cheap priced motor but it has reverse. Can you just swap the clutch pack with a straight 4 speed to remove the reverse?
Hey man ur vids are really informative, thanks for posting. I have a problem on my atv motor. For the timing chain and sprocket, i odnt know why, but for some reason when reassembling, the chain is now too short to reach the bolt holes for the sprocket for the camshaft
Buona sera, grazie per il video, Ti chiedo se tra il blocco e il cilindro per il passaggio dell’olio ci va un oring particolare. Stessa cosa tra cilindro e testata?
Hey man what kind of bolt goes and hold the rubber piece in that the chain goes around than goes to the cam just got one of these and it's missing that bolt and I'm redoing the gaskets on it idk what that rubber piece is called lol ? What does it do?
@@ScottsShed yea that has to be it bc the middle of the rubber wheel is smaller so that holds it in place it goes on before the cam gear mine was just sitting in there which probably won't hurt anything but I tried to order it he doesn't ship to Ohio lol one more question lol on the cylinder and head by the 4 studs you got the little dowel pins or guide pins to hold and match up the studs than there's another circle next to it little larger in diameter rubber seals go there what's them called I also need them lol but man I bought a whole truck load of quads engins and just misc parts for 40$ lol so figured I'd need few things
Hi i have a question It is possible that a 110cc cylinder could be put in a 90cc engine It is for a kazuma 90cc atv But I would like to put a 110cc cylinder on it You think the parts are compatible
Possibility but u would need a bigger piston and would need a bigger carb too also would have to measure the exhaust port to see if kazuma pipe will fit hope it goes well you will have to let me no how it performs if u get it done 🤙
Question. Just got a similar motor taken apart in a box someone gave me. I need to know what fluids go in it.. I’m pretty sure it will be a 10/40 but it’s a 4 speed. Is there a “trans” fluid?
I’ve rebuilt a few of these Chinese motors and still this day I don’t understand why they have the gear sensor screw so tight you need a screw impact driver to get it off! All of them are the same!
part 2 now live on you tube
AHHH! Cleaner than a fair few newer ones I've seen torn down over all. Well done. on the rebuild vid too.
@@mitch_smith thank you very much for the kind words
I used to ride quad bikes and stripped several engines and gearboxes to try and save them. Not one of them ever ran again! Big respect to you Sir, you make it look like art!
Thank you for your kind words
i still have this engine on my chinese motorcycle, its been running great for 11 years until now.
Do you happen to have a part number for your flywheel puller?
There’s a video on the channel about them
new to the channel...great video
cant wait for part2
Can the flywheel puller be purchased through Amazon? I have a 125cc with a suspected broken Woodruff key.
What’s the part called in your hands at 12:14 any help mine cracked trying to find replacement???
I think it’s a magneto backing plate not sure on the name or a stator backing plate sorry carnt be more help full 🤙
Did you find it??? Need one can’t find it anywhere!!
I have a semi auto 110, I want the buy the manual 125 with electric start and kick start, I found a cheap priced motor but it has reverse. Can you just swap the clutch pack with a straight 4 speed to remove the reverse?
No you need to change gear box
Currently working on part 2 guys
Hey man ur vids are really informative, thanks for posting. I have a problem on my atv motor. For the timing chain and sprocket, i odnt know why, but for some reason when reassembling, the chain is now too short to reach the bolt holes for the sprocket for the camshaft
Have you reinstalled the cam chain tensioner?
Buona sera, grazie per il video,
Ti chiedo se tra il blocco e il cilindro per il passaggio dell’olio ci va un oring particolare. Stessa cosa tra cilindro e testata?
What’s the part number on that flywheel puller
It’s a 27mm generic flywheel puller unsure on part number
SCOTT'S SHED 27mm left hand or right hand thread?
@@theautodidacticman_ right hand thread
SCOTT'S SHED strange, I’m only able to find the 27mm in left hand thread.
Let me check it and will get back to U
Perfect video, thanks. I'm definitely glad I found this video.
why was all of the oil in the firing area? bad rings or something? seems a bit heavy.
It had been sat for a few years oil was really thick and on of the rings was stuck
whats the name of that snap on screw hammer thing that you used?
Impact driver 👍
Hey man what kind of bolt goes and hold the rubber piece in that the chain goes around than goes to the cam just got one of these and it's missing that bolt and I'm redoing the gaskets on it idk what that rubber piece is called lol ? What does it do?
Do u mean the one on the cylinder what the cam chain runs on ? Is that the bolt your after
@@ScottsShed it's the cam chain tensioner bolt that goes into the rubber wheel for chain tensioner on cam gear tensioner
@@ALMIGHTYGARAGE www.ebay.co.uk/itm/403102861331?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=GL3JVNvcTxu&sssrc=2349624&ssuid=gFFjmb-yR_i&var=&widget_ver=artemis&media=COPY
This one ??
@@ScottsShed yea that has to be it bc the middle of the rubber wheel is smaller so that holds it in place it goes on before the cam gear mine was just sitting in there which probably won't hurt anything but I tried to order it he doesn't ship to Ohio lol one more question lol on the cylinder and head by the 4 studs you got the little dowel pins or guide pins to hold and match up the studs than there's another circle next to it little larger in diameter rubber seals go there what's them called I also need them lol but man I bought a whole truck load of quads engins and just misc parts for 40$ lol so figured I'd need few things
Hi i have a question It is possible that a 110cc cylinder could be put in a 90cc engine It is for a kazuma 90cc atv But I would like to put a 110cc cylinder on it You think the parts are compatible
Possibility but u would need a bigger piston and would need a bigger carb too also would have to measure the exhaust port to see if kazuma pipe will fit hope it goes well you will have to let me no how it performs if u get it done 🤙
What mm is the puller I’m gonna buy one but don’t know what size to get
there will be a video later on the puller 🤘
Iv uploaded a video on the pullers dude
Question. Just got a similar motor taken apart in a box someone gave me. I need to know what fluids go in it.. I’m pretty sure it will be a 10/40 but it’s a 4 speed. Is there a “trans” fluid?
Jeff Brady no just engine oil 10/40 should be fine has it only go one fill hole ?
SCOTT'S SHED I believe 2. I’m in the process of re assembling, just waiting on a few gaskets. It’s made by peace motor sports.
If two be two oils take a look on there web site maybe some info on there about it
Hi at 2min in the video u disconnect those wires from stator by tapping the star screw open please show how to connect those 3 wires 😢
How do you get the bolt off the fly wheel.
its a fly wheel puller tool available on amazon and ebay
@@ScottsShed how do you get it to stop moving to get the center bolt off
@@seandaly578 best of with a impact gun like the one i use
@@ScottsShed ok thank you. I see a lot of people posting the same motor but not everyone dose a good video best one yet
Thanks dude appreciate it there will me more pit bike build videos coming soon and going to finish the super moto pitbike witch is on my channel 👌
My son has a 90 cc one of those that has a blown head gasket would rebuilding one of those be about the same as that 110 cc motor ? This is the son
yeah the same just different sizes hope u fix it theres a video of the top end rebuild on my channel
Hey what size was that flywheel puller? 35mm?
Did I notice that there was no gasket for the carb air pipe to the head.
Well thats definetly a problem
Is this an automatic clutch type?
Yeah it is
Great work
Good video
Nice video
Waiting for part 2
Just been uploaded
There is always one snapped bolt. 😞
Nightmare 😃
On the plus side I can do a snapped bolt removal video 😂 thanks for watching
Always useful to someone 😬
@@paulbudford dropped You a sub Paul 👍
Awaiting part 2..
Won’t be much longer waiting on parts
I’ve rebuilt a few of these Chinese motors and still this day I don’t understand why they have the gear sensor screw so tight you need a screw impact driver to get it off! All of them are the same!
Not mine… never has been in my belonging atleast. I guess I’m just lucky
Part 2?
Next week hopefully
I have that impact. Love it
Yeah good little impact
very helpful thanks
Hopefully doing the rebuild when parts arrive
بھائ کدھر س ملےگا ھل
6:03 you are not even losing them
If u look I undo the other one same way and comes out 👀
next month
??