I enjoy your videos, very educational. I’m going to try porting for the first time. I’m gonna sacrifice my Stihl ms170 for this hopefully I pull it off.
Nice build. Going to build my 266xp with a 52mm bore, head gasket delete to start with. A sleeper 272xp..😆. I too enjoy the 200 series saws the best. It would be nice if Ryan or someone, would put together a nut, bolts, bearing, seals, top end, mag, clutch, oilers linkages and rubber grommets kit for these saws. Maybe a check list purchase, deal. All the needs and bits, one shop, one purchase. TC Mahalo Tinman 🤙🤙🤙
Well, after a few years of hunting local, I have finally found and brought home 2-266s; once of which is the 300 year edition! Both running saws.....y'all would kill me if you knew what I paid but here I'm the Maritimes the going rate on saws is bonkers. Looking forward to getting them in the wood this weekend!
I followed Harvey's 272xp cylinder and piston advice for my 268 and it's a Strong runner. It pulls a 28" full house no problem. Followed your advice for assembly and haven't had any issues. The both of you are great teachers. Quick question for you or anyone really. How come people don't run the 272 "west coast" HD airfilter more? Simple air filter and clamp. No gaskets, or extra screws. Seems much simpler than the other air filter designs. And makes for even easier disassembly and install. Take it easy and take care.
I bought a blown up saw that the wrist pin clip let go. Now I am paranoid every time I build a saw to make sure they are good and seated. Glad your starting to feel better. The flu can be rough especially when you have newborns around.
Yeah I'm gonna have to get myself another saw in that chassis to build, I'm digging working on my 181 but I wanna tear into one of the little guys and see what I can make
Try applying the Motoseal with small 10ml syringe. Drug stores sell them for 30 cents or so. 1mm tip without a needle lays down a perfect 'factory like' bead, no mess.
I’m putting two saws together right now. One is a 266SE that’s getting a 268XP top end. Other is a 61 that’s getting a Jonsered 630 top end. Can’t wait to get them done, they’re both in really good condition.
Good to see you again! Glad yer Feelin' better. Another great video !!!! Not to worry about the little one....kids are tough as nails. Mine used to run around the house with a 101 degree fever like he wasn't sick. He'd always run a temp when he was cutting teeth.
I have used permatex motoseal few times and dont like it much. Dirko is what i use now. In a past i have used Reinzosil and it works very well. Dirko and Reinzosil are easy to work with unlike motoseal.
I had the flu and covid last year. The covid a headache and sleepiness for a day. The flu total knockdown in bed and not movement for 2 days. The flu was vicious
Hey tinman congratulations on the baby girl , I know exactly what you mean my wife and I just had a first a baby girl 5 months ago , what a life changer . You don’t know what love is until you have a child .
hi.a did have one time broke the sureclip,it was in 2 piecies.well you can ques how the cylinder did look after that.hve heard couple more where the sure clip did broke.
Is a husky 266 and a jonsered 670 interchangeable, if so this could solve my barrell supply issues. I could attempt a port job knowing I have a spare. Please reply- and in my previous post it came out as spouse instead of spud, sorry no offence just predict a text.
Great but can anyone point me to another one where @Tinman makes a cone for the oil pump out of an old pop can. I watched it and now can't find it anywhere!!
I saw a 372 oe on my local for sale for 70 bucks. I truly hope that saw is going to come home to me :) Gonna throw a full wrap, muff mod, etc on it.
Lovely cylinder and great assembly 🙂
A lost my phone tinman a have missed soo much content... Hope you get better fella... Cheers fae Scotland....
Outstanding teaching and demonstration, as always👍👍👍
Glad your feeling better
Glad your better! Being sick is never fun👎🏻 especially with little ones.
Sounds great👍🏻 I'll bet that'll definitely be among Hogan's go-to's!
Sounds like a really great saw
Awesome saw brother 🙌 glad you are feeling better!
Love the 365/372 dawgs on that lil moster!
Another great video! I hope you're better soon!
Glad to hear u feeling better friend .hogan will be well pleased .peace an love from scotland stu an family.
Sounds like another good build !
I think this one is going to be one of my best.
MY first firewood saw was a 272xp my uncle gave to me awesome saw I like how you put together HOGANS saw with pride stay safe Tinman
I've always used hi-temp Pro Seal with good results in my shop. They're also an American company and they even sell it at Harbor Freight!
I enjoy your videos, very educational. I’m going to try porting for the first time. I’m gonna sacrifice my Stihl ms170 for this hopefully I pull it off.
Nice job! She sounds like a lil dirt bike idling along strong!
Nice build. Going to build my 266xp with a 52mm bore, head gasket delete to start with. A sleeper 272xp..😆. I too enjoy the 200 series saws the best. It would be nice if Ryan or someone, would put together a nut, bolts, bearing, seals, top end, mag, clutch, oilers linkages and rubber grommets kit for these saws. Maybe a check list purchase, deal. All the needs and bits, one shop, one purchase. TC Mahalo Tinman 🤙🤙🤙
Agreed! This is a great idea!
Well, after a few years of hunting local, I have finally found and brought home 2-266s; once of which is the 300 year edition! Both running saws.....y'all would kill me if you knew what I paid but here I'm the Maritimes the going rate on saws is bonkers. Looking forward to getting them in the wood this weekend!
I followed Harvey's 272xp cylinder and piston advice for my 268 and it's a Strong runner. It pulls a 28" full house no problem. Followed your advice for assembly and haven't had any issues. The both of you are great teachers.
Quick question for you or anyone really. How come people don't run the 272 "west coast" HD airfilter more? Simple air filter and clamp. No gaskets, or extra screws. Seems much simpler than the other air filter designs. And makes for even easier disassembly and install.
Take it easy and take care.
So our tips helped you build a good running saw!
I dont run the 272 filter cause they don't fit under the 266xp top cover.
@@tinmanssaws gotcha, take it easy pal.
I bought a blown up saw that the wrist pin clip let go. Now I am paranoid every time I build a saw to make sure they are good and seated. Glad your starting to feel better. The flu can be rough especially when you have newborns around.
I lost a saw years ago to a circlip failure, those can rough cause there's no seeing it coming then BOOM!!
Yeah I'm gonna have to get myself another saw in that chassis to build, I'm digging working on my 181 but I wanna tear into one of the little guys and see what I can make
Try applying the Motoseal with small 10ml syringe. Drug stores sell them for 30 cents or so. 1mm tip without a needle lays down a perfect 'factory like' bead, no mess.
I’m putting two saws together right now. One is a 266SE that’s getting a 268XP top end. Other is a 61 that’s getting a Jonsered 630 top end. Can’t wait to get them done, they’re both in really good condition.
hey Tinman , that Saw sounds great. Good job.Will we see her cut, or on Buckins Channel?
Good to see you again! Glad yer Feelin' better. Another great video !!!! Not to worry about the little one....kids are tough as nails. Mine used to run around the house with a 101 degree fever like he wasn't sick. He'd always run a temp when he was cutting teeth.
I have used permatex motoseal few times and dont like it much. Dirko is what i use now. In a past i have used Reinzosil and it works very well. Dirko and Reinzosil are easy to work with unlike motoseal.
I had the flu and covid last year. The covid a headache and sleepiness for a day. The flu total knockdown in bed and not movement for 2 days. The flu was vicious
Hey tinman congratulations on the baby girl , I know exactly what you mean my wife and I just had a first a baby girl 5 months ago , what a life changer . You don’t know what love is until you have a child .
Congrats! It's the greatest thing ever isn't it???
@@tinmanssaws yes it really is .
💯💯💯👍👍👍🤝🤝🤝
Any suggestions on a Stihl 034
hi.a did have one time broke the sureclip,it was in 2 piecies.well you can ques how the cylinder did look after that.hve heard couple more where the sure clip did broke.
Great job. Have you ever worked on or with a 460 Rancher
Sorry I've never worked on one of those.
@@tinmanssaws they are great saws for homeowners and farmers. Maybe you could check one out for the channel
Did you have trouble fitting the 266 top cover over the 272 cylinder?
How do you clean all that black and brown crud out of the fuel tank?
Just wondering what you set the ring end gap at? I have heard different opinions on that.
.005" to .008" per inch of bore is a good place to be.
I need a velocity stack for a 2100 so i can use a uni filter or the green weenie filter any idea where to find 1?
Is a husky 266 and a jonsered 670 interchangeable, if so this could solve my barrell supply issues.
I could attempt a port job knowing I have a spare.
Please reply- and in my previous post it came out as spouse instead of spud, sorry no offence just predict a text.
Great but can anyone point me to another one where @Tinman makes a cone for the oil pump out of an old pop can. I watched it and now can't find it anywhere!!
Does anyone know of a good carburetor replacement?
Oem carbs seem to be the only reliable option.
@@tinmanssaws agreed
What’s the difference with a 266se & xp
FYI --- I reverse tested cylinder torque and found a spec of 62 to 65 inch pounds consistently. .
Wanna see it in the wood
I lost 2 clips, I found one in my beard when I had a shower, the other I found on the floor the next day.
Lol I've been there
Hey tinman how can I get ahold of you your email isn't working