True Vertical Model Diesel Engine
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2025
- Diesel model engine with 13.5 ccm and direct injected fuel. Runs on diesel, Lampoil, Kerosene, White Spirit etc. Design is inspired by the engines of Find Hansen and early diesel engines. Hand start is possible down to a temperature of 10°Celsius using diesel oil. The engine is equipped with a high pressure fuel pump, controlled by flyball governor. Cooling is done via a water pump an a water jacket around the cylinder.
We make this engine available soon as a kit!
Nice to see an engine almost like mine, running so Well. Regards, Finds Motor
Thank you! And hats off to you Sir! You are the inventor of miniature diesel engines and your work has been a big inspiration for us! Your engines are truly a masterpiece!
Nice engine, looks to be running well.
Thank you!
thanks for sharing. keep up the good work.
Thanks!
I remember great grandpa having one of these in 1898 we just came over from Slovakia. I believe it was four horsepower.. And weighed about 600 lb
Beeindruckender Motor!
Ich freue mich sehr darüber, dass der Motor bald zu erwerben ist.
Lief die Entwicklung/Fertigung nebenher als Hobby oder Vollzeit?
Vielen dank erstmal! Das Ganze ist aus dem Wunsch nach einem Find Hansen Diesel auf dem eigenen Schreibtisch entstanden.
Zunächst in der heimischen Werkstatt und da ist auch die Einspritzdüse nach über 4 Jahren Entwicklung entstanden.
Mittlerweile arbeiten wir mit einem Betrieb zusammen, der über die entspechenden
Maschinen für die Fertigung verfügt - also Drehen/Fräsen konventionell und CNC, Laserschweissen etc.
I personally love to assemble from the ground up, a kit would be perfect for me. I would like to purchase this engine as soon as it is available. Please let me know if you need any "beta" testers.
Toller Motor! Gratuliere 👏. Ich bin seit Jahren ein Find Hansen Fan.
Auf das Set bin ich sehr gespannt. Gibt es eine Möglichkeit sich auf eine Merkliste setzen zu lassen?
Vielen Dank! Eine Merkliste gibt es so nicht, sonst einfach eine kurze Mail an: niffi_w@gmx.de
Well done and great crafstmamship. The model engine hobby needs high quality products like this.
Will you be releaseing this as assmebled model ?
thank you! Complete assembly is difficult because of liability issues here in Germany. However, we can combine components so that it takes little time to build the engine.
@@niffi2 Rein aus Interesse, was gibt es da für Probleme was Haftung/Garantie angeht?
@niffi2 that could be a great way to sell if it comes as ready to built kit . I would be keen on it
@@gediegengegonnt31 Wenn man den Motor erst montieren muss damit er läuft, gilt derjenige als Hersteller und übernimmt die Haftung. So einfach ist es aber leider doch nicht. Angenommen, der Betrieb des Motors würde zu Personen - oder Sachschäden führen, muss die Haftung geklärt sein. Wir sind aber gerade auf dem Weg hin zu einer Lösung.
Die gute Nachricht ist, daß dann auch ein voll betriebsbereiter Motor angeboten werden kann.
@@Engineman_show yes, but after speaking to a lawyer, we can sell the engine fully assembled. It makes no difference if it is a kit or assembled in terms of liability.
I wish my German was better.
This seems to be THE model engine for everyone else to aspire to! :)
The ease of starting and silence has to be seen to be believed.
What capacity is it and what are the power and economy numbers?
I ask as I want to build a small by functional Combined Heat and Power system to do actual work here!
Wow ! EIn sehr schönes Modell ! Wie breit ist denn der Zylinder am Mantel ausen ?
Vielen Dank! Die Breite ist 35mm, die Bohrung ist 21mm.
@@niffi2 ein gelungenes modell ! Find ist bestimmt stolz auf dich ! ich glaube du hast die Maße sehr gut getroffen! Darf ich fragen, sind die gussteile in Eisen oder alu ? und wird es einen gussteilesatz und zeichnungen geben ?
@@pirminkogleck4056 Danke! Der Sockel und A-Rahmen sind aus einer Zink/Aluminium Legierung gegossen und die beiden "Arme" zur Aufnahme der Nockenwelle sind im Feinguss aus Messing gefertigt. Kraftstoff - und Wasserpumpe werden beim Verkaufsmodell ebenfalls im Feinguss aus Messing gefertigt. Einen Gussteilesatz planen wir im Moment nicht, aber einen Bausatz mit fertig bearbeiteten Teilen ist eine Option. Der Motor wird aber zunächst als Fertigmodell angeboten.
@@niffi2 okay, toll . ich habe das video einem bekannten in den USA zugespielt, und direkt sagte er spaßhalber, es wäre toll wenn man die pumpe und den injector einzeln erwerben könnte. ich musste schmunzeln...ich habe mich selbst ein wenig am Diesel von find interessiert und habe bereits einen injector und eine pumpe am laufen, jedoch muss ich sagen dass der injector bei ihrem modell wirklich noch deutlich besser zerstäubt.
@@pirminkogleck4056 Danke, ja die Pumpe und der Injektor wird nur in Verbindung mit dem Motor verkauft. Die Entwicklung hat sehr viel Zeit in Anspruch genommen und ist praktisch das Herzstück von dem Motor.
I'm a huge fan of this engine and have always dreamed of owning one since seeing the masterful work of Mr. Hansen. How soon do you think it will be available? I can't wait to purchase it! I know a Chinese company recently released their engine, but there's simply no comparison between German engineering and a Chinese-made engine.
Thank you! Our goal from the start was to enable a quiet and slow idle run with a fuel consumption almost like a normal candle together with a quick reaction on the governor handle.
We have to deal with several regulations here in germany, but we are producing in parallel and we hope to be able to deliver the first engines in spring.
Nice! How much?
Thank you! It will be 1490 Euro including tax here in germany. 1215 euro excluding tax.
Will these be offered as a kit with material and drawings? I would love to machine one of these as a kit.
We will initially offer the engine as a finished model, but we are also planning a kit made from finished parts. As a finished model, we can test the engine before delivery and thus ensure problem-free operation. However, we are not currently planning a kit made from raw material with drawings.
Come hai realizzato la pompa e l' iniettore?
Grazie... complimenti molto bravo
The pump is a 2mm plunger pump with a ball valve at the intake and a special design ball valve for the outlet. The injector is a protected design, sorry we can not give you infos on that.
@niffi2 ok grazie e buon lavoro....👍
@@ulisse1360 Mille grazie!
Bro i wamt this engine pliz
Willst du auch was antreiben?
Das könnte man machen, z.B. einen kleinen Generator der Strom für eine Lampe erzeugt. Dafür müsste man dann aber selber etwas konstruieren.
Und was ist mit geregelter Kühlung?
@@MarcelSchmidt-v1r Die Kühlung ist im Prinzip geregelt, da der Kühlwasserbehälter offen ist und das Wasser verdampfen kann.
Ich meine mit einem irgendwie geregeltem Kühler wo die Temperatur geregelt ohne nachfüllen.
@@MarcelSchmidt-v1r Nein, einen geregelten und geschlossenen Kühlkreislauf, also mit Bypass, hat der Motor nicht. Das ist auch nicht wirklich nötig.
I've been trying to find threads from the Find Hassen engine for a long time.
Could you send me the engine plans?
Sorry, there are no plans available. But we will make a diy kit of this engine pretty soon!
@niffi2 yes
@@niffi2 aney idear on price? and is the kit alredy machined or is it a casting kit?
@@mechanicalmoron2251 all parts will be pre-manufactured, except for the fuel and water lines which must be bended and soldered and the valves must be grinded in. Price will be i guess below 1500 Euro, but it depends on our final calculation.
… ich bin absolut begeistert ! 🥰
When you can use the heat from an engine, the efficiency goes WAY up! To around 90%.
That mean that a CHP system can be considered house heat with free electricity
or house electricity with free heat.
When you look at the Combined Heat and Power systems available for a small household there are none.
Especially not quiet, easy on the ear, reliable systems.
Every second house has a solar system nowadays, making the hooking up of a CHP system much easier.
The sourcing of an appropriate, efficient generator is the only 'missing link'!
Well that and a simple auto lube/drip system and enclosure/sump.
ie: Besides the hobby market, I think there is a market for this type of engine as a household CHP system that you guys haven't yet considered..!
I have no problem with it being in kit form. Every house is different after all.
Wassup brother, been long since I saw ya
😀 by the way, there will be news about the axial engine, i guess in spring
@niffi2 That's very exciting, good luck with your project ❤️
Hallo
Super Modell
LG Lutz Wilhelm
Möchte dich zu meinem Dampf Benzin und Dieseltreffen 2025 einladen
In Zwickau
Sind nur Spezialisten unter sich
Eigenbauten , Exoten und Raritäten
@@lutzwilhelm4761 Vielen Dank!
Ich muchte eure engine ich komme aus india