Grabbing this video again in hopes of hearing it roar to life. MTrunk 85 fired up an old truck they had sitting on the property (and used it to move some dirt), so now I am all excited about this truck! Watching and Supporting!
I smile when I see the image of the chicken... every time. My head gasket survival test is trying to start the engine... University of Florida fans are loving the orange and blue! I am so wanting to hear it purr! It's ending and I am like, "Noooooo!" Watching and Supporitng - LIKING part III (part IV), but whose counting! LOL
I was laughing at the part where you said I can put this camera down if you need help. I would’ve said get your ass off that camer, come over and help haha! Nice job getting it to this point!
that spider web looked like the way brown recluse do theirs, not very neat, I know might bet comments, but heads are about the only thing I ever used a torque wrench on,,, I know some folks want to even torque the wing nut on the air filter, but most things aren't that critical.
We had a Internatiol R190 truck tractor. Engine was a IH Red Diamond 450 inline 6 gas.. I was in Vo-Tech school at the time and I was allowed to bring it to the school and do a rebuild on it. It was frozen tight..we got the head off it on a Friday filled the cylinders with mixture of diesel and WD-40 let it set over the weekend. Monday we pulled it out with the 1100 Massey tractor the school had took some 4x4's about 8 to 12 inches long and a sledgehammer an hot the top of the pistons.. put the truck in 4th or 5th gear and began to pull it around the school lot.took about ten minutes but the engine turned over.
🍃Farmall..Low and Behold Spiders🕷..Tractors love em!!..Hmm..Do I smell Rust?!💚🖤Super SweeET..watching and Supporting..Enjoyed!! much Respect from New Orleans Louisiana ..☆ steph..opal..aka Big Mama
I cant say the Last time i threw the Stock heads on one of those lol most of the ones i had been around we put Dart Heads on and even threw an Isky Cam with a 270 duration in which was not a cheap feat lol but it made about 40 more horse over stock which was about all a guy could afford for the 13 Letter Shit Spreader lol
Oh this sucker gon drink gas all day @around 165 ponies. Im gonna wind it out too. Im losing my ass on crops, I might as well nail the coffin shut with a 4 mile to the gallon truck lol
4 Mpg lol nice and Funny thing is the New International CV Truck is just hitting the Market and they are Using the GM Duramax 6.6 and Chevy truck Cab and interior for the smaller Med Dutys now
You should have shown the combustion chamber for those of us unfamiliar with these engines. They looked different from the standard pentroof I'd expect in a automotive head.
Is there any good (valid) reason why you left the layers upon layers of crap on the block... and then did the head gasket and heads...? Serious question... I don't understand the logic behind not giving a shit with a fast clean. Not even re-paint... but just a CLEAN.... (???????)
Great update brother!!! Sorry, a nigga almost hacked my page .. i think it's a nigga woman and my page is messed up now... Full view ✔ and big hugged like..💯💯💯👍👍👍
Big thumbs up 50 my friend im here always supporting you full view have a great weekend
Hey there Farmall, thanks for joining me on my livestream the other night. I'm here to check out this unboxing.
Coming along real well...waiting for part 4 and vroom vroom...have a nice day....Jeanie
I'm not mechanical, but I was truly intrigued. Tfs. 👍👍👍👍
Grabbing this video again in hopes of hearing it roar to life. MTrunk 85 fired up an old truck they had sitting on the property (and used it to move some dirt), so now I am all excited about this truck! Watching and Supporting!
I saw that video and loved it! Thanks for the added watch time!
NYC sharing
Great job
Thumbs up! Have a great weekend!
Well your getting closer! It's all looking good so I can't wait to finish up!! Thanks for sharing.
That is a job of passion. Fun watching this. have a great weekend.
Starting to look like an engine again! Thanks for the updates.
Looking good. She’ll be pering soon. Thanks for sharing.👍🏻
Just watching looks a lot easier hahah .. Man.. a lot of work there!
Damn this channel has always been killing it. Best farming channel props
Thank you! 🤠
I know that you are really supportive in the community too. :)
10 9 8...... You're getting there!! The countdown started!! Good luck! I want to hear that motor! lol
I have learned a lot about that engine
Wait til you find out how much gas it drinks 😲
I smile when I see the image of the chicken... every time. My head gasket survival test is trying to start the engine... University of Florida fans are loving the orange and blue! I am so wanting to hear it purr! It's ending and I am like, "Noooooo!" Watching and Supporitng - LIKING part III (part IV), but whose counting! LOL
Very nice work again
I was laughing at the part where you said I can put this camera down if you need help. I would’ve said get your ass off that camer, come over and help haha! Nice job getting it to this point!
Im the boss, I get to be the jerk hahaha
haha there's a lot of perks to being the boss!
رائع
I think that you did a great work with this. Congratulations! You are a master on this!
U have a super duper blasting intro my friend, engine building is awesome,that penetrating spray seems to work the best, big thumbs up
Wow that looks like alot of work
Looking good coming along 👍🏻👍🏻👍🏻
Catching up bud. Well done!
Ready to see this thing run
Looking forward to the startup.
Nice video and good looking truck
Nice little tune you played. 😀
the head is a heavy beast almost back together now mate
*😇dropped a like👍👍AU 👫🔍fully viewed🔎*
If you are happy it's all good :) enjoyed the watch. 👍
I love the Browning 👍🏼
Them I know...vehicle parts...not so much
Thanx Farmall👏🏼👏🏼👏🏼
Liked haha...this is so exciting, waiting for the final result😄wow great stuff you got there. Haha...sounds rhythmic to me😊
Cool stuff Left you a like
This is cool friend!👍
The anticipation is killing me! Lol.
Nahhh lol
Same here lol 🤣
It won't be long now will be listening to her purr like a kitten
Just wondering did you clean off the surface rust on the bottom of the heads, and the intake surface?
Sure did 👍
Looks great awesome work
that spider web looked like the way brown recluse do theirs, not very neat, I know might bet comments, but heads are about the only thing I ever used a torque wrench on,,, I know some folks want to even torque the wing nut on the air filter, but most things aren't that critical.
Getting her done!!
cant wait to see it run
We had a Internatiol R190 truck tractor. Engine was a IH Red Diamond 450 inline 6 gas.. I was in Vo-Tech school at the time and I was allowed to bring it to the school and do a rebuild on it. It was frozen tight..we got the head off it on a Friday filled the cylinders with mixture of diesel and WD-40 let it set over the weekend. Monday we pulled it out with the 1100 Massey tractor the school had took some 4x4's about 8 to 12 inches long and a sledgehammer an hot the top of the pistons.. put the truck in 4th or 5th gear and began to pull it around the school lot.took about ten minutes but the engine turned over.
amazing sharing frnd!!!
Dammit man! where the other two parts? Hahaha! good stuff! Thanks for sharing
Great rebuild man!!! 🙌:-) Nice work
Thanks for sharing!!!!
getting there man , one video at a time ...lol
Engine parts still available anywhere? I’m not having luck locating much other exhaust manifold from Vanderhaags.
I bought my kit off Ebay
🍃Farmall..Low and Behold Spiders🕷..Tractors love em!!..Hmm..Do I smell Rust?!💚🖤Super SweeET..watching and Supporting..Enjoyed!! much Respect from New Orleans Louisiana ..☆ steph..opal..aka Big Mama
You smell it and I taste it haha
Trying to figure out why he bolted your new xylophone to an engine. 🤔
Well I like your DIYs Hot glue guns don't work with your projects. Great to have help on these projects
Cool!
We want 4 we want 4 lol i had to watch again
Cool I was hoping that you would upload part 3🙏😇
Its getting there lots of hard work
one day closer to purring like a kitten!!
2 more videos till we hear it run! oh man.
Old bus engine, cant wait!
did this have a 2 barrel carb?
Yep
👍💖
Big hugs!! FROM New Orleans Louisiana..☆ Steph..Opal Aka Big Mama
Nice getting along looking like a engine..I thought you mite play. Taps off us on the head..
Haha thought about it
If there is anyone who can rebuild an engine, it is you!
Ty for the share share
(Tip... hoisting heads... use hay hooks!!)
thnx for sharing
I cant say the Last time i threw the Stock heads on one of those lol most of the ones i had been around we put Dart Heads on and even threw an Isky Cam with a 270 duration in which was not a cheap feat lol but it made about 40 more horse over stock which was about all a guy could afford for the 13 Letter Shit Spreader lol
Oh this sucker gon drink gas all day @around 165 ponies. Im gonna wind it out too. Im losing my ass on crops, I might as well nail the coffin shut with a 4 mile to the gallon truck lol
4 Mpg lol nice and Funny thing is the New International CV Truck is just hitting the Market and they are Using the GM Duramax 6.6 and Chevy truck Cab and interior for the smaller Med Dutys now
You should have shown the combustion chamber for those of us unfamiliar with these engines. They looked different from the standard pentroof I'd expect in a automotive head.
I was new to making videos then
@@FarmallFanatic fair enough.
Those exhaust valves are at an odd angle aren't they?
@@j.danaclark2166 Yes they are it's an International 345 . Pretty simplistic to work on really
Lot done today. You will be firing her up before you know it.
Where's 4 can't wait to hear it run
Nice it will be purring before you know it. Just soak it down and wack'em
That was funny wackamole for mechanics nice sound could have made music to that
So who is your helper?
Hillbilly
Soak em down! That should work pretty good...lmao 😊😎
Nice!!
Is there any good (valid) reason why you left the layers upon layers of crap on the block... and then did the head gasket and heads...? Serious question... I don't understand the logic behind not giving a shit with a fast clean. Not even re-paint... but just a CLEAN.... (???????)
Because I needed it now, not next year.. serious answer... Otherwise, i'm with you
Valid. :-) @@FarmallFanatic
Hey I didn’t name it Crafty cooking sorry lol. But it’s me AKA Crafty Mommy85 coming to support with my second channel 😊
Ill visit this channel, tfw!
you boys aint scared to tackle anything
We do a couple engines a year...lot of fun.
Great update brother!!! Sorry, a nigga almost hacked my page .. i think it's a nigga woman and my page is messed up now... Full view ✔ and big hugged like..💯💯💯👍👍👍