This Door Is Ridiculous! Barn Find 1967 Chevy C10 Stepside
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- The Barn Find 1967 Chevy C10 Stepside is back in the garage for some tlc! The driver's door is ridiculous & needs to be fixed for good. We fixed the door in a previous video linked below but it's catching on the fender again. A big hammer & a block of wood is the answer. We also need to install the finger guard underneath the hood. There is also a flat tire we are going to plug. Tool, parts, t-shirts etc. are linked below.
Subscribe www.youtube.co...
Here's the Chevy C10 videos I mentioned!
We're Improving The Barn Find 1967 Chevy C10 Stepside
• We're Improving The Ba...
BUDGET Ring Job! '67 Chevy C10 Straight 6
• BUDGET Ring Job! '67 C...
Cracked Engine Replacement On The Barn Find 1967 Chevy C10 Stepside!
• Cracked Engine Replace...
'67 Chevy C10 Breakdown & Recovery Mission
• '67 Chevy C10 Breakdow...
Heater Problems In The Barn Find 1967 Chevy C10 Stepside
• Heater Problems In The...
Here's some parts, tools, shirts etc!
The Tire Plug Kit I Use: amzn.to/3RErxId
More Tire Plug Kits: amzn.to/3Tkjce8
Autobody Tools: amzn.to/46UbBWY
Tire Iron: amzn.to/47TSBJq
Pneumatic Impact: amzn.to/3v3sAsl
Impact Sockets: amzn.to/47TWldU
Chevy t-shirts: amzn.to/3Pprzl0
I'm Not Old I'm Classic T-Shirt: amzn.to/3PapRFj
Carhartt Jackets: amzn.to/3NnYNkC
Chevy Hats: amzn.to/4ajCiqY
Dewalt Drill: amzn.to/3TnMxEz
Automotive Test Light: amzn.to/3RBYjsD
Magnetic Work Lights: amzn.to/3GlFtk0
Telescoping Magnet: amzn.to/3QWrJ4h
WD-40: amzn.to/3T68pUL
Brake Parts Cleaner: amzn.to/3PkdWn5
Blue Shop Towels: amzn.to/49ntks4
Purchases made through some store links may provide some compensation to Freeman's Garage.
Please like, comment, subscribe & share!
Thanks for watching!
#freemansgarage
I mentioned this Chevy C10 video th-cam.com/video/5VInLMYLDTc/w-d-xo.html
I've used the same tire plugs for 40 years now, they work very well.
At first I thought "hinges are sprung" until you showed it closing easy. Then when you started with the wood and hammer I thought "a slat of wood under a prybar with gentle pressure" but you got it working fine the way you went with it. Good deal.
That is a good idea.
after you trim the ends you get some fire on it with a match & melt it a bit.
Light the ends with a BIC and let it fizzle out inside the tread... Makes a perfect seal everytime... Makes the plugs last triple the life
That's smart.
I'll give it a try. Thanks for taking the time to comment that.
Really like the truck squeaking door and all
It is a nice squeak. It will probably come back again.
That truck is worth getting a body man to fix that door.
Agreed.
I had a 71 GMC once that the wind caught the driver's door and wanged it open and jacked it up. I have a 55 and a 56 wheel you can have if it will help.
That darn wind. That's terrible. I really appreciate the offer for the wheels. The 56 wheel would help. Then I would just need 2 more for a full set of 56 wheels.
Steps I ALWAYS take on doing Plugs..... Ream the hole with the reamer/file handle about 10 to 14 times.... Add the plug into the T Handle...... Add a good glob of rubber cement into the hole and press plug inwards until its about an inch from the bottom of the T Handle... Pullup slowly until the opening in the end of the T Handle is visible... Snip the rubber strip in the eye.... Trim off excess leaving about an inch of the strips showing... Get a BIC and light it... Let it burn until it fizzles out... Never had a plug fail yet.....
I wrote that down on a piece of paper. Next time I do a plug I'll try it that way. If I can find the paper that is.
@@freemansgarage I use a drill to ream out the hole. Then proceed with the T-Handle.
Man I thought that handle was going to break & go right through your hand.
I'm glad it didn't.
Move the dang fender forward!
That might throw off the front end.
@@freemansgarage then again, it might not! Quit half-assing it!
@@deidredarnell5693 The fender isn't ALL JACKED UP, THE DOOR IS, CHRIST.
My god, the door opening up at the beginning of the video was worse than nails on chalkboard. You’re probably better off just driving around without a door. 😂
That's funny. I guess I could go Jeep style.
@@freemansgarage Exactly!