Same here...This fixed mine.. Changed the throttle Body & Gas Pedal Sensor ( it has A Sensor that goes Bad on It , it all together ) This will fix the Reduced engine power
So I'm having the stabiltrak light come on and I have to get my obII reader and delete codes and then It will work again like nothing for a while but it also says by 2nd Bank of 02 sensor needs to be replaced you think I need to replace this or what else should I take a look at it kinda sounds like it's misfires sometimes thanks for the help You think mine could be the same parts I need to replace on my Escalade
@@jesushernandez-wu3ri which wire brother do you think and which sensor the 02 sensor is that what your talking about if so also does it matter what sensor I buy ive seen some Bosch that run about 25 and some trq that run 120 bucks should I get just a regular Bosch one or a more expensive trq one thanks for the quick reply and which wire do you think I need to check out thanks for your reply brother 👌👍👍
@chatobalencian1504 The Bosch will Do. 02 Sensors have a wire attached to them ..Sometimes the inside of the wire ( the copper ) it looses it continuity ..Keep posted on the Results...Also you can do all things Thru Christ.
@ nope . Got a new bcm checked the grounds under the dash , behind the passenger wheel well . All good . Got it going into the dealership Monday for 5 recalls one being the exact problem with the stability tack system . Recommend looking up the recalls on the truck . I believe the new bcm isn’t programmed correctly. My fault code says bad can bus sensor to electrical brake system ( stabilitrack)
You’re the goat my sensor is fucked and every time I turn right it will kick on and my ABS will turn on so I can’t turn
Same problem for me, bout to try it. TY
Mine kicks into Reduced Engine Power when i turn right
Pulled ABS fuse, still same problem but with a message
Stabiltrak Off
Same here...This fixed mine..
Changed the throttle Body & Gas Pedal Sensor ( it has A Sensor that goes Bad on It , it all together )
This will fix the Reduced engine power
So I'm having the stabiltrak light come on and I have to get my obII reader and delete codes and then It will work again like nothing for a while but it also says by 2nd Bank of 02 sensor needs to be replaced you think I need to replace this or what else should I take a look at it kinda sounds like it's misfires sometimes thanks for the help
You think mine could be the same parts I need to replace on my Escalade
@@chatobalencian1504 Might be a Loose wire or The Sensor went out ( Full of Carbon ) change it out and it should clear That Code
@@jesushernandez-wu3ri which wire brother do you think and which sensor the 02 sensor is that what your talking about if so also does it matter what sensor I buy ive seen some Bosch that run about 25 and some trq that run 120 bucks should I get just a regular Bosch one or a more expensive trq one thanks for the quick reply and which wire do you think I need to check out thanks for your reply brother 👌👍👍
@chatobalencian1504 The Bosch will Do.
02 Sensors have a wire attached to them ..Sometimes the inside of the wire ( the copper ) it looses it continuity ..Keep posted on the Results...Also you can do all things Thru Christ.
Mine was a broken abs wire passenger side . Still have service stabitrack warning
did you ever find out how to make it go away?, having same problem
@ nope . Got a new bcm checked the grounds under the dash , behind the passenger wheel well . All good . Got it going into the dealership Monday for 5 recalls one being the exact problem with the stability tack system . Recommend looking up the recalls on the truck . I believe the new bcm isn’t programmed correctly. My fault code says bad can bus sensor to electrical brake system ( stabilitrack)
Hey bro what about an 2014 Chevy imala lt I have the same problem
Impala
Hold the traction cl tell button down for 10 seconds
Did you watch the video
Ima try on my 2019 hopefully it won’t 😊
Didn't work on a 2018 Silverado