So I got this exact same exhaust for my 450ss and I didn’t put the silencer. It’s a lot louder but not obnoxious loud. Pretty much straight piping it lol
@@imTjmotovlog I own the 2023 ....pretty loud as is sitting in traffic. Ride those revs your bike is capable of 68 miles per hour in 3rd gear over 80 in 4th 48 in 2nd, and 32 in first. Just gets better when ride those revs. I shift at around 7200 rpms. Get to know what the capabilities of your bikes performance are. Really a great bike in all weather with the current tires.
I just got my exhaust in the mail. It comes with all those pieces but mine came with another small cylinder tube but idk where it goes! Anybody know what I'm talking about?
@@imTjmotovlog Hello. Instead of getting shorter springs just bend the spring loops up to a 90-degree angle to the surface they are welded to. This solves two problems. One. Use of the springs that you already paid for. Two. Rattles/noise. When you bend the loops up it gets the springs away from the pipe instead of laying on it and creating a harmonic noise from vibration. Also, when pulling on the spring from loop to loop do not pull past the loop. Only just enough to clear loop. This weakens the spring because you distort/ stretch the windings. This weakens the pulling power. You can see how the top spring winding past its center has gaps not uniform to the rest of the windings. If on any application when using springs and they start to bend the coils during installation you are using to short of a spring for the distance to be captured.
Another tip on these types of mufflers that do not have a hard mount welded to the muffler. Make sure you run the bolt through the beginning and end of the clamp with nothing in between. Otherwise you are adding length to the clamp creating a spacer and the designed clamping force is reduced. This oversite is what usually causes the rubber channel gasket to start working itself out between the clamp and muffler.
@@melisa2607 Im not sure link is allowed. I tried but its not going through. /item/1005004895170972.html?spm=a2g0o.order_list.order_list_main.289.35291802aQUiQK
@@SludgedB I didn’t even know they made one, I just checked it out but it seems a bit bulky. Hopefully with CFmoto getting more attention more companies will make different styles
@@truantray Yikes you heard it here first folks, if you like the sound of your motorcycle you’re a squid lmfao. Let people enjoy their bikes man, The drop in power (if any) will not be noticeable with just a slip on exhaust. I’ll agree if you do a full system then you need to re-flash your bike.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
absolutely my dream bike 🤍🖤
Thats is insane it almost sounded like R7 holyy
It’s temporary but I definitely love it
@@imTjmotovlog what do you mean temporary bro? The sound? It gets changed while u ride the bike??
@@muhammadumer1276 No 😂 the slip on is temporary. Hopefully a full exhaust is in the near future 👀
just bought mine now!!!
It sounds like a CR-T (SC Project)
I just got one on my rs660, also a 270deg P-Twin… sounds like an offshore boat
So I got this exact same exhaust for my 450ss and I didn’t put the silencer. It’s a lot louder but not obnoxious loud. Pretty much straight piping it lol
Hey, loved the install! But what lift stand are you working with? Ive tried a couple and none of them seem to work on this bike
The 2024 sounds much quieter than 2023 which I have.
The video definitely doesn’t do it justice but I would love to find someone with a 2023 and do a side by side comparison that would be awesome
@@imTjmotovlog I own the 2023 ....pretty loud as is sitting in traffic. Ride those revs your bike is capable of 68 miles per hour in 3rd gear over 80 in 4th 48 in 2nd, and 32 in first. Just gets better when ride those revs. I shift at around 7200 rpms. Get to know what the capabilities of your bikes performance are. Really a great bike in all weather with the current tires.
@@JessicaSimonson1976 the 23 and 24 are the exact same
He sounds like Ryan Reynolds when he says,Oh my God!
Hi, I’m curious if you just took off the decals or bought a new fairing kit. Thanks 🙏🏾
This was how the bike came from the dealer
@MotoChrispy u have this?
Pretty sure this is the one he mentions in his recent 1 month bike review video.
Sounds great 👍. I'm waiting for you too open it up ????
I will be making a full sound only video soon for this set up!
Where can I get one for my 2024 ninja 500
I just got my exhaust in the mail. It comes with all those pieces but mine came with another small cylinder tube but idk where it goes! Anybody know what I'm talking about?
Paint the adapter black. It looks so much better after I did.
I actually thought about doing this, I still might
Question about the silencer, once its pushed against the adapter, will it be flush within the muffler? My silencer seems to droop down a bit
It doesn’t sit straight unfortunately but it doesn’t seem to affect the sound at all from what I’ve experienced
@@imTjmotovlog Thank you!
I just got the exact same exhaust and I'm just waiting for mine to arrive.
Can you tell me what the length of that spring you used? Thanks!
I think the kit comes with 65mm springs but the ones I used were 58mm!
@@imTjmotovlog Hello. Instead of getting shorter springs just bend the spring loops up to a 90-degree angle to the surface they are welded to. This solves two problems. One. Use of the springs that you already paid for. Two. Rattles/noise. When you bend the loops up it gets the springs away from the pipe instead of laying on it and creating a harmonic noise from vibration. Also, when pulling on the spring from loop to loop do not pull past the loop. Only just enough to clear loop. This weakens the spring because you distort/ stretch the windings. This weakens the pulling power. You can see how the top spring winding past its center has gaps not uniform to the rest of the windings. If on any application when using springs and they start to bend the coils during installation you are using to short of a spring for the distance to be captured.
Another tip on these types of mufflers that do not have a hard mount welded to the muffler. Make sure you run the bolt through the beginning and end of the clamp with nothing in between. Otherwise you are adding length to the clamp creating a spacer and the designed clamping force is reduced. This oversite is what usually causes the rubber channel gasket to start working itself out between the clamp and muffler.
hey could u send the link for the exhaust cuz the one in the desricptipn doesn’t work anymore
@@melisa2607 Im not sure link is allowed. I tried but its not going through. /item/1005004895170972.html?spm=a2g0o.order_list.order_list_main.289.35291802aQUiQK
Just bought one too!! How many db would u say it is if you know?
I'm not sure on the exact DB
@@imTjmotovlog okay 👌
did not check the sound without anything :(
What size? I ordered one but it doesn't fit so ill have to return and get a different one.
I didn't see an exact size, I just filtered the search out by this motorcycle model and that's the one I purchased
What's the link for the exhaust men!
In the description
Hi I also installed this exhaust but its leaking. How do i fix this?
Which area is it leaking from?
This or the yoshimura exhaust?
Up to personal preference and if you can afford the Yoshi
try toce exhaust..
Mine definitely hate me…lol
I just installed a KO Lightning on my 2023 ZX4RR and its way too loud. I now need ear protection! Something has to be done to reduce the noise.
Did you use the silencer?
@@imTjmotovlog Yes
@@etobiCRACKscorpions Wow that’s crazy, the ZX4R is definitely a beast of a bike
Bro! I switch to the Austin Racing . I felt like an asshole with my KO lightning lol So Loud
It is crazy loud! And that’s even with the silencer in. I couldn’t imagine if didn’t have the silencer in
do you have a link for the austin? haha
@@imTjmotovlog is it too loud? like having no muffler at all? thinking of getting one.
Perez Shirley Clark Betty Thompson Sharon
The eBay exhaust mod
Gotta do what you gotta do until more companies make exhausts for this bike haha
@@imTjmotovlog yoshimura does
@@imTjmotovlogif the point is to make noise and lose power, just take the exhaust off.
@@SludgedB I didn’t even know they made one, I just checked it out but it seems a bit bulky. Hopefully with CFmoto getting more attention more companies will make different styles
This will just make noise like an a-hole and drop power. Squids suck.
@@truantray Yikes you heard it here first folks, if you like the sound of your motorcycle you’re a squid lmfao. Let people enjoy their bikes man, The drop in power (if any) will not be noticeable with just a slip on exhaust. I’ll agree if you do a full system then you need to re-flash your bike.
Did enjoy the video. But please stop saying, O-M-. As a Christian it makes me ching. Saying this in love for you bro.😢
ching? also, not everyone has to abide by your belief. grow some thicker skin, weirdo.
Shut up and stop telling people what to do. Christians always with their self righteous BS