Hey guys! This is my new 2024 Jeep JL Rubicon X. I am running 37x12.50 x17 Nitto Ridge Grapplers and recently installed a warn winch to stock steel bumpers. Stay tuned as I begin my latest build!
Thank you! And congratulations on your new Jeep! I was torn between the Anvil gray and the Zenith Silver. Anvil is a great looking color! But I am super stoked with the silver!
Nice. Looking forward to seeing to seeing u build it out. I’ve got my 24 Rubicon X on order. With the strike, I think it’ll be a few months till I can get it
You should have opted for the 488 gear option. It fits 35s and 37s better . If your going serious offroad then you may want a Mopar 1 and a half inch lift on top of what you.have . It will rub with those 37s unless your just doing basic trails .
Thanks for the comment. The tires do not rub. I have already done some serious offloading at Beasley Knob, GA and Windrock Park, TN. This Jeep came from the factory with the lift. (About 2" higher than stock Rubicon)
Nice Jeep! I ordered my rubicon x in July but stll waiting. I want to take mine to Moab as well and was thinking of 37s. I am new to this. Did you makes any changes to put on the 37s? Did you have any issues with rubbing or flexing on the trail?
Thanks bro! I ordered it with the extreme recon package. It came factory lifted and with BFG 35’s. I had my dealer install 3/4” Tera Flex spacers on front and back and he switched out the tires to the 37” Nitto RGs. I have zero rubbing. None at all. At this trail, (check out Beasley Knob. It’s one of Jeeps Badge of Honor trails rated at 7-9.), the tires never rubbed and that was with a lot of articulation and sway bars disconnected. I am very satisfied.
My Rubi x is supposed to be delivered by the 4th of December. I am curious if you have flexed out at all in and experienced any rubbing with the 37's? I want to add 37's to this one like my old one but I dont want to lift it any higher. Too many issues with previous lifts.
Hey Steven! ! I ordered mine with the extreme recon package, so it came factory lifted and with BFG 35’s. This is about 2" higher than the stock Rubicon. I had my dealer install 3/4” Tera Flex spacers on front and back and he switched out the tires to the 37” Nitto RGs. I drove it before and after installing the spacers and I didn't feel any difference in the ride. I have zero rubbing. None at all. Beasley Knob is one of Jeeps Badge of Honor trails rated at 7-9. The tires never rubbed and that was with full articulation and sway bars disconnected. I just got back from Windrock Off-road park in Tennessee and had no issues there as I did all three badge of honor trails. Anyway, I hope this helps! Let me know if you have any other questions!
I just bought a 2024 Wrangler Sport 4DR that came with a 3.5" lift and 18" Fuel's on 35" Nitto's. What tire pressure should I run on the street? You're about the ninth channel I've sent this question out to with no response so far. And many of those channels I subscribed to )-;
Thanks for checking out my channel. I run mine at 36psi on the road. That seems to work well for me. Of course I usually air down when I run off-road. Hope this helps!
Hey there! Thanks for the question. No, I haven’t had any rubbing issues at all, and I have been on some pretty serious stuff! However, when I am loaded down with camping gear I was sagging a bit in the rear. So I added an airlift kit in the rear and solved that issue.
Thank you for the comment, and great question! I used a Rough Country Winch Mounting Plate (for a 18-23 JL) I ordered it online from Extreme Terrain. They had the lowest price. I believe it was $149.95. Hope this helps!
I ordered this Jeep with the recon package. It came with 1.5" of lift above the stack rubicon. The 37's fit perfectly without any mods and I have zero rubbing even while serious off-roading. The rims are also a factory upgrade with the recon package. I'm not sure what the offset is, but it works great! Stock tail light.
I have a 2023 Rubicon 392 with extreme Recon. The same specs as your for lift and rims, I believe. I was thinking about changing to 37’s. Thank you for the info.
Thanks for the question! I actually had the bar left over from a 2021 JL that I had never installed. So unfortunately I don’t have a link. I believe it is a warn bar, but I really don’t remember.
Hi Steven. True mpg is 16. Slightly less if I am wide open on Interstate. Slightly more if I’m on backroads. I’m running 4:56 gears. I have a buddy who runs 37s with standard 4:10 gears and he gets a little better, but I have more get up and go than he does. Hope this helps!
@seoverland316 that's what I thought but wasn't sure if it was dirty white or silver. My 2012 JK is bright silver. I think the two silver paint colors might actually be the same.
Love the setup! Awesome jeep
Thanks! I appreciate it!!
absalutely fantastic car . luv it. thnxs 4 vid.
We bought the exact same and it's our first ever jeep.. Definitely will follow along.
Thanks for the comment Mike! And thanks for following along! Look for more soon! I'm currently overlanding in North Georgia and North Carolina.
Looks amazing guy cant wait to see your build out. I just recieved my 2024 Rubicon X in Anvil gray and I love it.
Thank you! And congratulations on your new Jeep! I was torn between the Anvil gray and the Zenith Silver. Anvil is a great looking color! But I am super stoked with the silver!
thank you@@seoverland316
@@seoverland316 Happy Trails 🙂
Nice. Looking forward to seeing to seeing u build it out. I’ve got my 24 Rubicon X on order. With the strike, I think it’ll be a few months till I can get it
Thanks! The wait is worth it! Mine shipped just a few days before the strike. I was lucky for sure!
I bought a 2024 Rubicon Extreme Recon! I subbed!
Congratulations! And thanks for following along!
You should have opted for the 488 gear option.
It fits 35s and 37s better .
If your going serious offroad then you may want a Mopar 1 and a half inch lift on top of what you.have .
It will rub with those 37s unless your just doing basic trails .
Thanks for the comment. The tires do not rub. I have already done some serious offloading at Beasley Knob, GA and Windrock Park, TN. This Jeep came from the factory with the lift. (About 2" higher than stock Rubicon)
Nice Jeep! I ordered my rubicon x in July but stll waiting. I want to take mine to Moab as well and was thinking of 37s. I am new to this. Did you makes any changes to put on the 37s? Did you have any issues with rubbing or flexing on the trail?
Thanks bro! I ordered it with the extreme recon package. It came factory lifted and with BFG 35’s. I had my dealer install 3/4” Tera Flex spacers on front and back and he switched out the tires to the 37” Nitto RGs. I have zero rubbing. None at all. At this trail, (check out Beasley Knob. It’s one of Jeeps Badge of Honor trails rated at 7-9.), the tires never rubbed and that was with a lot of articulation and sway bars disconnected. I am very satisfied.
Thanks, I tried finding these online and at Tera Flex. I see the 1" Teraflex but not 3/4". Where did you get these?@@seoverland316
I’m sure they added 2” bump stops in the rear too.
My Rubi x is supposed to be delivered by the 4th of December. I am curious if you have flexed out at all in and experienced any rubbing with the 37's? I want to add 37's to this one like my old one but I dont want to lift it any higher. Too many issues with previous lifts.
Hey Steven! ! I ordered mine with the extreme recon package, so it came factory lifted and with BFG 35’s. This is about 2" higher than the stock Rubicon. I had my dealer install 3/4” Tera Flex spacers on front and back and he switched out the tires to the 37” Nitto RGs. I drove it before and after installing the spacers and I didn't feel any difference in the ride. I have zero rubbing. None at all. Beasley Knob is one of Jeeps Badge of Honor trails rated at 7-9. The tires never rubbed and that was with full articulation and sway bars disconnected. I just got back from Windrock Off-road park in Tennessee and had no issues there as I did all three badge of honor trails. Anyway, I hope this helps! Let me know if you have any other questions!
That is great news! I ordered the same package because I didn’t want to go down that road of replacing everything to get a decent lift. Thank you!
@@stevenvoss311 Any time!
I just bought a 2024 Wrangler Sport 4DR that came with a 3.5" lift and 18" Fuel's on 35" Nitto's. What tire pressure should I run on the street? You're about the ninth channel I've sent this question out to with no response so far. And many of those channels I subscribed to )-;
Thanks for checking out my channel. I run mine at 36psi on the road. That seems to work well for me. Of course I usually air down when I run off-road. Hope this helps!
It helps. Thanks.
I have the same jeep, 2024 Rubicon X, I want to put 37" tires on. Like yours. Do you have any rubbing issues on the stock wheels with no lift??
Hey there! Thanks for the question. No, I haven’t had any rubbing issues at all, and I have been on some pretty serious stuff! However, when I am loaded down with camping gear I was sagging a bit in the rear. So I added an airlift kit in the rear and solved that issue.
I have the same Jeep and I am looking at doing a winch. What kind of winch plate/mounting hardware did you need? Great video!
Thank you for the comment, and great question! I used a Rough Country Winch Mounting Plate (for a 18-23 JL) I ordered it online from Extreme Terrain. They had the lowest price. I believe it was $149.95. Hope this helps!
@@seoverland316 Thanks! Any issues with fitment with the RC Mount?
None at all. Bolted right in place! @@timflaherty2731
Did you have to mod anything to get the 37’s to fit? Like the rear tail light, and is there any offset in the rims?
I ordered this Jeep with the recon package. It came with 1.5" of lift above the stack rubicon. The 37's fit perfectly without any mods and I have zero rubbing even while serious off-roading. The rims are also a factory upgrade with the recon package. I'm not sure what the offset is, but it works great! Stock tail light.
I have a 2023 Rubicon 392 with extreme Recon. The same specs as your for lift and rims, I believe. I was thinking about changing to 37’s. Thank you for the info.
Absolutely! @@MrSilentarcher
1-4 turbo or v-6. Very nice jeep ❤
It's a 6 with 4.56 gears. Thanks for your question!
Where did you get the push bar? Link?
Thanks for the question! I actually had the bar left over from a 2021 JL that I had never installed. So unfortunately I don’t have a link. I believe it is a warn bar, but I really don’t remember.
I'm thinking about getting me one as my last vehicle
What’s your fuel mileage?
Hi Steven. True mpg is 16. Slightly less if I am wide open on Interstate. Slightly more if I’m on backroads. I’m running 4:56 gears. I have a buddy who runs 37s with standard 4:10 gears and he gets a little better, but I have more get up and go than he does. Hope this helps!
What is the color?
Silver Zenith Clear-Coat
@seoverland316 that's what I thought but wasn't sure if it was dirty white or silver. My 2012 JK is bright silver. I think the two silver paint colors might actually be the same.
You might be correct on that! They are certainly very similar! @@kenwilliams4086