The Ultimate DIY Table Saw using Circular Saw

#plywoodworking #tablesawstation #DIY
Please Subscribe and share this channel!!
join on Plywoodworking Tips & Trick Group on FB !!
/ 479435482886643
/ plywoodworking
/ plywoodworkingtipstrick
00:00 - Intro
00:30 - lifting part
08:07 - riving knife & blade cover
12:07 - trunnion & dust collector
17:26 - Top Table
21:26 - fence
27:41 - test
Making Diy table saw using circular saw, i upgrade blade from 8' to 10' for maximum cut. Use linear bearing and cevel gear as lift mechnism. over all this is work all.
this is really help me for working and I am very pleased with the results and would recommend making one yourself
---------------------------------------------------------
Music Track:
Acoustic Inspiring Soft by RomanSenykMusic.
Acoustic/Folk Instrumental by Hyde - Free Instrumentals
Wondering - Atch / atch-music
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/-wondering
Music promoted by Audio Library • Wondering - Atch (No C...
🔻
"Keys of Moon - White Petals" is under a Creative Commons (cc-by) license
Music promoted by BreakingCopyright: • ❤️ [Copyright Free Rom...
🔺

[@ljose007]

This is one of the best tutorials I have ever seen on youtube, and I have been watching for decades

[@plywoodworking]

Thank you very much!!! 👍👍. glad you enjoy this video

[@vksubra1953]

Beautifully done. I am saving it for reference. I need to make one and your design is easily the simplest and most practical. Thank you for sharing 🇮🇳

[@plywoodworking]

Thank you very much!👍😊👍

[@duoweiwong8308]

Amazing ! This video gave us fine information from design to fabrication. It is really professional standard. Thanks for your sharing !

[@plywoodworking]

Many many thank for your comment, glad if you like this project😊

[@petermeijer3019]

Wow your are a master in your work!! I have a lot of respect for your craftsmanship. Well done you did a great job!!! Thanks for sharing.

[@plywoodworking]

Thank you very, glad you think like that😊

[@bradleytuckwell4854]

It looks better then your old Stanley table that you owned. So stunning to look at

[@plywoodworking]

You right, i sell my old table saw stanley and build this. I suprised with the result low vibration and powerfull

[@maearboleda3620]

Meticulously wonderful DIY tool ever made on a vid!

[@plywoodworking]

Wow, thanks!

[@chuckvoss9344]

Amazing craftsmen ship. Very very good.

[@brianillsley4376]

Great video, I would love to build one but sadly I don't have the skill, a written tutorial with plan/dimensions would help :) looks fantastic

[@plywoodworking]

Thank you very much!👍😊👍, the plan will be ready soon, now i still make that!!

[@sgnt9337]

Great job with this project. I like that Wood-Plastic composite material. I'll hang on to this one for some how-to ideas. Thanks for posting.

[@plywoodworking]

thank you 👍👍

[@PatrickKrolickoff]

Wow!!! It is really a MASTERPIECE!!!

[@plywoodworking]

thank you very much👍👍😊

[@ebrahimfaiz8522]

very creative, quick, easy off switch specially in a situation of stress.

[@plywoodworking]

Glad you like it!

[@yvesaltana2013]

Wow, you're and absolute genius, beautiful skills and a very good concept.
Thank you for sharing

[@plywoodworking]

Thank you very much!

[@temyraverdana6421]

Nice job! thanks for sharing your experience

[@plywoodworking]

Thanks for watching!

[@gregh9629]

One of the best I've seen. Nice table!!

[@plywoodworking]

Wow, thanks!

[@martendavies]

First class workmanship sir!

[@plywoodworking]

Thank you very much!👍😊👍

[@hamidrezamirmoazi6129]

thanks man. you have a big and mercifule soul and spirite.....

[@plywoodworking]

I appreciate that!

[@mifthhuda5119]

Great tools,great skills and great job

[@plywoodworking]

Thank you very much👍🏻👍🏻

[@killua2854]

I rarely comment on anything but this project is just got so much details and hard work and designing that makes it so perfect, great work hope you best and keep this quality projects going

[@plywoodworking]

Many many thank you for your comment, glad you like this project!!👍🏻👍🏻

[@xxakli]

AMAZING!

[@joesmoe71]

This would be a great platform for someone that wanted to build a table saw which is servo/stepper motor controlled so as to get precise angles, cuts and perhaps an automatic feed.

[@plywoodworking]

thank you very much!!

[@bhargavram5561]

Very useful Video for small shops. I really thank you for sharing the detailed information about making this Table Saw. Really nice work 🫡

[@plywoodworking]

You are very welcome

[@oneconsc3333]

Absolutely fantastic job ... even the video is well done. 🙏🏻💜🇨🇦

[@plywoodworking]

Glad you enjoyed it!

[@keupondestroy911]

Merci beaucoup pour la vidéo

[@richardbaylis6211]

Bin echt erstaunt, dass man mit einfachen Mitteln, sowas hinbekommen tut. Respekt !

[@plywoodworking]

Thank you very much 👍👍

[@richardbaylis6211]

You Welcome. And I'm thrilled to see more Videos from you. And greetings from Germany.

[@poerwojadoel7992]

masbro,tutarial mu sangat mendidik dan jelas .lanjutkan

[@plywoodworking]

thank you very much 👍👍

[@MahmoudMouradSidky]

Big fan my friend, all respect to your work

[@plywoodworking]

Thank you so much 😀

[@feitosaadverso710]

Adorei muito bom maravilha, parabéns pra vc.😃

[@idics4947]

Great work!! Going to make one like this.

[@plywoodworking]

thank you very much!!!

[@tomaseusebioalvarezcardena1506]

Maravilloso... Felicitaciones, un abrazo desde Perú.

[@plywoodworking]

Many many thanks

[@IEnjoyCreatingVideos]

Great job on the table saw build Friend! really turned out nice :) Thank you for sharing the video with us!💖👍😎JP

[@plywoodworking]

Thank you! Cheers!

[@IEnjoyCreatingVideos]

@@plywoodworking Your very welcome Friend! Have a awesome week!😎

[@josephlee1266]

전송 고맙습니다 TH-cam 영상을 을 매일 보고 잇어 요 볼수록 신기 합니다 Regd Kbl

[@mprumsey]

What a excellent build. Thank you for sharing

[@plywoodworking]

Thank you very much!👍😊👍

[@ottorinopugliese7697]

Complimenti. Davvero un ottimo lavoro!

[@plywoodworking]

Thank you so much 😀

[@luiscarlossuarezmarquez264]

Excelent video 👏 👏 👏

[@plywoodworking]

Thank you very much!👍😊👍

[@stevelowe340]

Beautiful the best DIY saw build I have seen

[@plywoodworking]

Thank you very much!👍😊👍

[@rayhughes8240]

Well done. One of the best designs and will fit perfectly in my workshop. Can I ask if you have any trouble changing the blade through the top blade insert? Thank you

[@1b1uster]

BRILLIANT! As we say in America, “Give yourself a pat on the back!” Nicely done.

[@plywoodworking]

Thank you very much!👍😊👍

[@ginogenero7972]

"...and on the 7th day He rested." 😇

[@artwithdad5131]

So beautiful and accurate

[@plywoodworking]

Many thanks 😊

[@paceydaudey176]

Tres beau travail, belle précision 👍magnifique 👍👍👍👍👍

[@plywoodworking]

Thank you very much!

[@user-zh5wd4rr1k]

Огонь 🔥всё здорово, а главное аккуратно, лично я балдею 👍☕

[@plywoodworking]

Thank you very much!

[@adrianrocero2948]

Smooth vibration and in precision,, i liked this video because it plays smooth also not like to the other's video it plays very fast so the audience cannot understand what they want to be seen and think but this one is transparent and understable. Great idea and job well done sir👍

[@plywoodworking]

Awesome, thank you!

[@zubairumar1035]

Wow amazeing working i like u project

[@plywoodworking]

Thank you so much 😀

[@ricardojimenez6325]

Just perfect

[@plywoodworking]

Thank you very much

[@pdstokes8]

Great work man.

[@plywoodworking]

Appreciate it!

[@felixl.camarador1238]

Nice job, its perfect...

[@plywoodworking]

Thanks a lot!

[@designerscode]

Thanks great vedio. I seen many vedio and all r was so confusing but ur vedio is very good.

[@plywoodworking]

Thanks and welcome

[@PauloCesardeSouzaMendes]

És um VIRTUOSO...Parabéns...Abraços...

[@plywoodworking]

Thank you very much!👍😊👍

[@leonardokalinci9894]

Very nice indeed 👍🏼

[@plywoodworking]

Thank you very much

[@xodnevych]

amazing job

[@plywoodworking]

Thank you very much!

[@jimspc07]

well made video. One thing though the trunions seem to be incorrect in design they should place the tilt centre of the blade at the top of the table surface so the blade comes out of the same slot for both 90 and 45 degrees. As you have made them they tilt below the table and toy might as well have simply used pivots under the table top. Several table DIY makers show how to design the trunions where the tilt is projected to the top of the table and where to place the centre of the trunion circles compared to the chassis and table top.

[@plywoodworking]

thank you very much!!!

[@Easy-PCorg]

Very great job 👍👍

[@plywoodworking]

Thank you very much!!! 👍👍

[@ronny_9847]

Well done

[@plywoodworking]

Thank you very much

[@user-mh5ze5ov2z]

Классная работа.спасибо

[@plywoodworking]

Thank you very much!👍😊👍

[@danieljrpeters6637]

Your amazing.

[@plywoodworking]

Thank you very much

[@evacardoso8211]

Isto não é ferramenta é uma obra de arte

[@grimoirworkshop6623]

Great project, liked moment when we should see saw blade kiss the fence nice and parallel camera suddenly blurs out lol. You could’ve done it adjustable, though.
Seriously man, very inspiring and great project, no kidding.

[@plywoodworking]

Thanks for the tips!

[@tadatada-vb9md]

superb VDO clip

[@plywoodworking]

Thank you very much

[@aserta]

Instead of using a linear bearing, which adds complication, a single point tilting raise setup is preferred. It's also good because you can put a single strong pivoting point, and use trunnions to make it super rigid.

[@plywoodworking]

thank you very much!!!!

[@hurriyetsusuzlu9052]

BRAVO...

[@plywoodworking]

Thank you! Cheers!

[@smitcher]

This is a great build and it turned out fantastic. If there was just one thing that I would point out that you did wrong. Your trunnion centre point shouldn't be lined up with the top of the sawblade block but rather the centre needs to line up with the table top - All you would need to do it cut the thickness of the table top off the trunnion and move it up. You can see the issue the current setup causes at 22:30 where the plate has had to be removed to tilt the blade - with the size of the slot in the plate you should be able to tilt to 45 degrees without removal but the issue that you are having is because the trunnion is off...
Other than that it is a fantastic build, thanks for making this video! 👍

[@plywoodworking]

thank you very much!!!

[@karimalhaddad9949]

So nice

[@plywoodworking]

Very nice

[@mwchalhoub8881]

Perfect Stép by Stép tutorial

[@plywoodworking]

Thank you very much!👍😊👍

[@TheTylerWhit]

Cortes suaves y precisos

[@rjwhite907]

Damn, I want that saw, amazing job man!!

[@plywoodworking]

thank you very much!!

[@fardhonainterior7903]

Masya Allah... Bagus Om...
Kayaknya posisi engsel(gak tau namanya) yang buat ngatur derajat kemiringan blade di kurangi 18mm(sesuai ketebalan top table) apa ya om? Biar posisi pusat derajat tepat ada di permukaan top table. Jadi kalo mau diatur kemiringan ndak perlu ganti insert lagi.

[@plywoodworking]

Selama ini sih klo tiap mau miring harus ganti insert mas kecuali lubang insertya gedhe, klo ini posisi insertya agk lebar coz aq ngejar selang dust collector ddlm kabinetya jdi posisi trunionya agk setengah lingkaran, klo mau agk sempat dikurangi ukuran trunionya. Ato ada cara lain tp ketebalan bladeya berkurang gk sampe 8cm

[@stefankaptens4952]

Great job and highly inspiring. Have plans to build a circular saw into my workbench in the garage and I will most likely borrow some of your ideas. A question though. You don't find that a blade bigger than what you normally could fit in the saw you used gets too much for the motor to handle?

[@plywoodworking]

Thank you very much

[@PlywoodCreative21]

Nice

[@plywoodworking]

Thank you very much!👍😊👍

[@Zain-nn8ep]

how did you align the miter tracks to blade? bit confused. im trying to follow this and build it.

[@plywoodworking]

Using blade for main align, same like the fence, i using blade for setup fence

[@emilianorobles5418]

Incredibly nice!! I love it. How much would it cost to build me one like that?

[@plywoodworking]

Thank you very much, build this i need $150-$165, linear bearing need a lot cost

[@amanalesha3658]

Alhamdulilah sy dapat ilmu dr sampean mas semoga di kasih sehat dan sukses mas oh iya mas itu mata gergajinya ukuran berapa inch

[@plywoodworking]

Alhamdulillah klo bermanfaat yg dipke ini 10 inchi

[@amanalesha3658]

Oh iya mas terimakasih impormasinya

[@ghavinakbarani9638]

keren bang, ijin bikin ya

[@plywoodworking]

siap smoga bermanfaat

[@prabaprabath4871]

Supar👍👍👍👍

[@plywoodworking]

thank you very much!!

[@moisesmartinez6693]

TÉ agradezco mucho tu atención y generosidad por compartir exelente herramienta bien detallado disculpa lo tarde 👌👍😎😊

[@plywoodworking]

thank you very much!!!!

[@claudiosousa8273]

Meu sonho era presentear meu filho com uma mesa dessa

[@plywoodworking]

thank you very much!!

[@claudiosousa8273]

Sou um brasileiro sonhador e não tenho condições de ter uma bancada dessa 😔 mais um dia Deus irá me ajudar ✋ eu tenho muita fé nele!!!

[@patrickguyot1290]

Cheaper to buy a table saw rather than destruying an expensive Bosh i think 😊

[@plywoodworking]

This is a bosch pro more cheaper than bosch, yup you can buy a cheap table saw than make this but it needs calibration and the top table is not wide.
this is optional 😁

[@iainclaassen4120]

great video
do you have plans?

[@plywoodworking]

pkan will be ready soon!

[@ThePirocadoida]

Without a doubt, it is a wonderful job. I have just one question.
How much time and money did you invest to do it?

[@plywoodworking]

Thank you very much, i made this need 1 week and spent $150, but the result made me happy

[@dylankrugerthesalessleuthp5787]

Is it too early for plans for this? its freaking awesome and probably WAY oitside my skill set for now.

[@plywoodworking]

thank you very much!!!

[@dylankrugerthesalessleuthp5787]

@@plywoodworking Any plans to release the plans for this build?

[@plywoodworking]

Sorry I'm not ready for this plan yet I will release this plan for this project soon

[@justone3243]

Sense and advantage of trunnions? Turning point of the sawblade can be put into the surface of the desk.

[@plywoodworking]

100% agree

[@maurizioborghi2863]

Hai fatto un ottimo lavoro. Mi piacerebbe realizzarlo, mi aiuteresti mandandomi i disegni? Di nuovo bravissimo.

[@plywoodworking]

thank you very much glad you like this

[@maurizioborghi2863]

@@plywoodworking Dei disegni non mi hai detto niente, mi piacerebbe averli per provare a farlo. Non ti faccio concorrenza, sono un vecchietto con l'hobby del legno. Di nuovo bravissimo un saluto Maurizio

[@fepemi]

Magistral.

[@plywoodworking]

Thank you very much!👍😊👍

[@martinhumaj5426]

Perfektní práce,ale nakolik ta pila vyjde, není lepší si koupit novou?

[@plywoodworking]

thank you very much!!

[@josephboucher4654]

Do you know if I buy HMR in the USA

[@Tensquaremetreworkshop]

There are a number of YT videos on tools called 'ultimate' of 'perfect' - but they are made of wood. Any quality table saw will have major components made from cast iron. This is not for fun- there are good reasons.

[@michelevaiarelli8266]

Buongiorno mi è piaciuto il suo video volevo sapere che tipo di materiale ha usato?
La ringrazio

[@plywoodworking]

thank you very much!!!!

[@astridsumpter4208]

I am currently doing the saw and trunion part right now. Can't find WPC where I live - Google is not being friendly. What type of metal do you use for the insert on the top?

[@plywoodworking]

Wpc almost same with pvc board/pvc sheet. Maybe you can use that keyword for search material. My old table saw i use 2mm aluminum but i more like wpc material coz reduce vibration

[@patrickrayyan2694]

@@plywoodworking Om minta link nya dimana kita bisa bili WPC

[@henriquepicelli]

Great job! Have the plans avaliable?

[@plywoodworking]

will be ready soon

[@paulogoncalves1071]

Overall great work, but with a problem in the configuration of the trunnion as is clearly visible in the video the blade can not be tilted to 45 degrees without having to change the top cover and also is a large gap between the top and blade saw. You have to take into account the thickness of the top and that the "pivot" point is at the top of this top, on the other hand the cut that you make at 45 degrees in the mobile part of the trunnion is not correct because in this way it will never be possible for the disc to tilt at 45 degrees because the trunnion will hit the bottom of the top well before the disc reaches this inclination, say you have to cut more. As I said the rest is well done but it is a shame that it is ruined by the poor configuration of the trunnions, you should fix that and you would get an excellent saw.

[@plywoodworking]

Thank you very much 👍👍

[@griyakayoe8155]

Mas izin tanya...klau utk top tablenya...yg mas pakai wpc klau multiplek dkombinasikan dgn HCP gmana mas utk kerataannya...mhon sarannya mas..trims

[@plywoodworking]

Hcp blm pernah cbain plng kuat atasya metal ato aluminium. Tp enakya wpc itu ngeredam getaran jdi suara mesin lbh halus. Klo mau pkayu lapisin pake HMR jga ckp kuat

[@RoweSeymour]

Have you made plans for this table saw build and if so could I purchase them. I will have all the bearings and linear parts shortly coming by mail. Thanks Rowe.

[@plywoodworking]

i will message you if the plan ready, give you email

[@AbdiKarya]

Jos banget mas did...

[@plywoodworking]

maksih banyak mas

[@donloterusterusan8908]

keren mas.. btw mas mw tanya blade aeg nya itu pake merk apa y? trus apa pake adapter buat arbor nya? trims

[@plywoodworking]

siap amaksih mas, baldeya pake diablo emg khsuus untuk CS 6 inchi ada banyak kok di marketplace. PNP tanpa dirubah arborya

[@bungalow62]

Asli....keren..👍👍🙏🏻🙏🏻

[@plywoodworking]

Thank you very much!👍😊👍

[@JSKmonkeywood]

Keren banget guruku 🙏🏿🙏🏿

[@plywoodworking]

maksih banyak mas

[@lahcooobaitu]

Kerennn lokasi workshop dimana pak?

[@plywoodworking]

Surabaya

[@yurikocraze1019]

is that a 7¼ circular saw?.,im wondering if it can run a 10" blade without over heating

[@plywoodworking]

Yup 71/4 until now still work strong, dont push to hard and cut hardest wood with high thickness. Recomeded using trust brand like makita, bosch dewalt and etc. But if not sure using standart size blade

[@juniortamutututyiatutyia1717]

👏👏👏

[@plywoodworking]

thank you very much 👌😊👍

[@ramosoficinadamadeira5510]

Ficou muito bom

[@plywoodworking]

Thank you very much!👍😊👍

[@sedenter]

Great project.
But, allow me a small comment. Even though I'm nothing but an amateur woodworker, I could observe that you didn't consider the center point of the whole mechanism when you designed those trunions. If you would've, than you wouldn't be forced to change the insert every time you need to cut on an angle.
I mean no offence, I consider the entire project a success, exept for this part.
Good luck!👍

[@plywoodworking]

Thank you very much

[@kangeman7269]

ukuran bevel gear sama no bearingnya barapa yach...sekalian minta link online shop yang jual komponen tsb...makasih info dan ilmunya...

[@plywoodworking]

Itu bevel pya stanley cri onlien banyak kok