Reading The "Flashing D"
ฝัง
- เผยแพร่เมื่อ 23 ก.ย. 2024
- The Foxwell Elite OBDll has made a few things clear. It has also redirected me back to an old area of interest; the pressure switches. One thing is for certain, the “Flashing D” can indicate a number of problems. It’s safe to say that it’s your transmission main point of communication.
DISCLAIMER:
I make no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. This broadcast and parties associated with this broadcast are not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
The park neutral position switch looks like an interesting path to go down 🤔 I have a new 3rd gear sensor that I still need to install
I think the pressure switch(s) and linear solenoid are all tied together.
They are! But it can only communicate to us through the "flashing d". So, If you see it, know that your transmission is trying to tell you something is "wrong" and it doesn't have to mean that it's something catastrophic!
@@DIYD I hope you're right. My Acura TL is my first Jap car, so my trust in it is no where the same as a Ford ranger or F150.
Were you getting a check engine light along with the flashing D?
Yes. BUT there can be circumstances where they are not related. The scan tool can cut through all of that while keeping the guessing to a minimum 👍🏾
I’m getting code p0976 solenoid b low circuit any idea on how to fix it
No, I don't unfortunately.
I have some similar symptoms, I'm leaning towards the shift solenoids. Have you checked those yet? theres 2 of them for our 5 AT. One that controls the 1-4 gears and 1 that controls the 5th/OD gear?
Not yet. As OEM are on the higher end to replace I'm keeping them in the back before I count on them to be the problem. But on radar as they can be the culprit. Right now we are at the fuses and a few more harnesses. Keep us updated on your end
@@DIYD will do. You remove them and clean them out as they can get clogged. each gear has "pipe" with a inner screen. you can clean them out with brake cleaner. Also you can check the solenoids themselves with a 12v battery and checking that they are contracting properly. But thats my move soon. Junk yards have them for 100/set at least here in cali. I'll test mine before buying them..
@@randydelgadillo5297 yea I've cleaned one ... Need to check for voltage
Any updates on this issue I have this issue that car will drive perfect and all the sudden all the dash lights come on and car shifts very late and d flashes
Not really ... Yet it has progressed. If it's the same problem as my own the most recent video will show you the progression. But get your codes read and make sure it's not P0705. It may be something else as I repaired two codes when I read them. I also left it at a shop a week ago but had to pick up before they could get to it. When I do it will be posted. It can't be this evasive! 🤔🤔
Yes please get back to us I know a lot of people have had this issue I changed fluids car drove perfect as soon as the lights kick on car runs rough and shifts late only code coming up is a p0980 code
@@jiovannyfigueroa4863 have you changed out the entire shift solenoid? That code is for a solenoid. Cleaning it may not be enough if it's faulty
@@DIYD yes I changed it and tested the sensor I changed every sensor possible on the transmission and still having this issue
Ah ... you are that far along too ... yea, it's coming. at this point, it's a matter of finding the time. I took it in two weeks ago, only to pick it up two hours later.
Waiting for an update
We are taking it to a trans shop when money and time permits
Im gettin these same codes this been a nightmare i changed the WHOLE transmission still giving me the codes
Two of the codes are easy fixes. The 3rd gear pressure switch and the speed sensor. Since this comment they are no longer present. You can change them out with references from my previous video. The transmission range is the mystery. I'm still figuring. Time will tell. Baring any unseen catastrophes, I'm going to figure it out.
@@DIYD i swapped the whole tranny and the codes still comming lol
@@DIYD have you changed the wiring engine harness???
@@gelatofrenchies6925 I changed a harness but apparently not "THE" harness.
@@DIYD im seeing one that connects to the ecu - Engine/tranny harness
Hi sir thank you for your video very helpfull i have a foxwell 650elite but it looks like this scanner doesnt read trans code i will have to buy the one you are using automaster pro can you provide me with the model# shown in the back of the scanner so i can try to buy the same one as yours thank you very much
FOXWELL NT614 Elite OBD2 Scanner-ABS/SRS/Transmission/Check Engine Light Code Reader Scan Tool with EPB/Oil Light Reset, Airbag Car Diagnostic Scanner (Got 50 dollars off on Amazon Day)
@@DIYD Thank you