Thank you, hope everything worked properly after you've assembled it back). One of the most useful videos on the net, applicable as well to E class W212!
it is a lot of tedious work but well worth Diy'ing on any real Benz driven around town. Parking without camera is so passé nowadays. Brilliant retrofit todah 🤗
Can't believe the cameras in this era didn't have the guidelines. It's ridiculous considering they were available on other models in the previous gen. Massive oversight. I'm trying to figure out if the older/newer gen cameras can be fitted in place and gain the guideline functionality. Any info on that is appreciated!
hi very good job, I live in France and i have a mercedes w216. I need the plastic trim as your own used in your modification with the protection of the cam. Could you tell me the right reference in mercedes OEM, please. Thanks for your help. Dave
You are a life saver !!!!! Please could you help me with a detail please ! I have a Mercedes c300 15 plate and it already has a fitted camera but it doesn’t come out all the time I am on reverse ! So basically some times it works sometimes not ! I guess is the lid that doesn’t allow the cam to come out as when it comes out it works pretty well! Do you have any suggestions for me pleaseeeee???? Thank youuu
@@killerhertzmercedes Yes thats Power (+) and ground (-), but where's the 3rd cable for the Signal??? You didnt Show it in the Video. You Show only how you install Power and ground.
@@z.m.5612 signal input is really from "Reverse lights" - You can pick it up near SAM source or trace it from the rear LED lights. Every car model has different wirings specific colors (need to get diagram for your VIN # for a 100% match) 👍
Hey, really struggling to get the black plastic strip off, any advice? I have disconnected the lock and all the wires. I have squeezes the licence plate light clips but still not moving. I thought it might be the handle but I see that goes out with it
Yeah I remember that being really tough - there is a plastic 'C' bracket which goes between the handle and the locking mech if I remember correctly and that needs to be slid out (I could be wrong as its was over a year ago!)
Awesome very informative, just little confused, the original wiring harness came with green connector which goes to the rear sam unit, however do i need to open the fuse carrier in the kit and insert in the fuse carrier on the car or wire? a bit confused why they supply with the harness when it’s already there? Thanks for your reply.
Hi, I would like to do the same retrofit for my 2015 E220 Saloon. Do you happen to have the part number for the kit from Mercedes? Also do you fitting? If so could give me a price? Many thanks in advance.
@@killerhertzmercedes - Ok but you don't list the parts. Many of the sites will cross reference the correct part. If you can please update your description.
Hello i ave the same Comand of you and as many dificilt to instal the Reversing camera rear please tel me more how conect the camera in the Comand I dont know the suich green?? Or brawn or yellov??
Now are Ok i ave conected in the Green 2end Right and my camera i worck perfect 👌 Thanks again ) hother suich are ocuped in the hole Green ) i ignore for server this suich ????
I have a s550 it has the actual camera in place when I put it in reverse it only shows the check your sorrounding lines. I checked fuse and there is no fuse it only has one wire contact instead of two. Any idea how to fix.
@@killerhertzmercedes but wouldn't it have a fuse or at least a second wire in the fuse box. Because according to find it is equipped w back up cameras in reverse of two or at a second to get enough to take care and I will let it get back up wddng7bb7aa343480
I bet you a soda the wire brake is where rear HARNESS MEETS THE TRUNK bundle... don't just go poping your front console to see the video connector is plugged in solid! 👍
just wondering if its possible to retrofit parking sensors to an a class with none i have a bumper available with pdc, is this already in the main consol or will it be a tricky one. i heard that all the data for everything is in the centre consol it just needs to be turned on via a mode?? a180d se 2015
Can you tell me if its the camera or wiring. Have Mercedes e250 2013 estate and if I do settjngs fkr camera with straight reverse lines camera works but if I change setting to get moving grid line and car sensor theres no picture do you know dk I need to buy a different camera thanks
it's hardly amazing bargain priced '17 Honda (ACURA in US) have all these must have options built-in including leather seats... plastic seats are not available such as in E-class
@@killerhertzmercedes I did pay the professional to install mine same spot as U but on the screen shows the line wasn't straight when reversing., Yes It does make a difference. Not saying at the boot button but maybe drill in a lower part like number plate and under the rear bumper. As in all instructions for a reverse cam says must b at center.
The aftermarket camera that is fitted to my 2013 mercedes c class has stopped working after doing a factory reset of the head unit, all I see is a black screen. The system info is as follows: MCU Ver: 615085dFY-N4.5-G-D-C-200113 APP Ver: Ksw-P-Userdebug__OS_v3.8.7 System Ver: 9-8953EA MCU Upgrade System Recovery Any ideas how I might get the screen to see the camera again? Brian
KillerHERTZ Mercedes Modifications thanks for that. It was a complete shot in the dark that you might know, seems odd as it worked just fine before i restored the factory settings. Thanks again, great channel by the way 👍
It's likely to be something very simple, a cable that has a kink in it, or a plug has come undone? Sorry can't really be of more help Thanks for feedback!
Hello from Ireland! Great video, I followed it all to the end but... no signal is on my camera. May I ask you to contact you by email with all my details and photos included? You might push me to the right direction.
@@Dia_dhuit all parts from ebay. And about the panel - this is my other project which is waiting for the camera to start working first. Ib bought panel with electrical openning button in it. So I will stick my camera into it then.
Just watched 50 seconds of the video and came here straight to write this.. Thumbs up 👍🏻
Thank you, hope everything worked properly after you've assembled it back). One of the most useful videos on the net, applicable as well to E class W212!
Thank you so much for the video with so mutch good information.
it is a lot of tedious work but well worth Diy'ing on any real Benz driven around town. Parking without camera is so passé nowadays.
Brilliant retrofit todah
🤗
Can't believe the cameras in this era didn't have the guidelines. It's ridiculous considering they were available on other models in the previous gen. Massive oversight. I'm trying to figure out if the older/newer gen cameras can be fitted in place and gain the guideline functionality.
Any info on that is appreciated!
hi very good job, I live in France and i have a mercedes w216. I need the plastic trim as your own used in your modification with the protection of the cam. Could you tell me the right reference in mercedes OEM, please.
Thanks for your help. Dave
Great video, nice pacing and detail!
Very good coverage and good sound explanation. Look forward to more videos
Do you still remember what color wire the back up tail light has. I want to tap into the that wire to get a signal to the camera. Thanks
Sorry no, just use a multi-meter on the pins whilst pressing the brake.
@@killerhertzmercedes Ok, thanks, thought do not go that route but that's ok, thank you anyways for replying back
Can I do the similar thing to my Mercedes’ w221? How much is the full setup ?
Went to Mercedes today for my e63 they do not have anything for mine
Contact mbenznl to see if they still supply them. Regards
You are a life saver !!!!! Please could you help me with a detail please ! I have a Mercedes c300 15 plate and it already has a fitted camera but it doesn’t come out all the time I am on reverse ! So basically some times it works sometimes not ! I guess is the lid that doesn’t allow the cam to come out as when it comes out it works pretty well! Do you have any suggestions for me pleaseeeee???? Thank youuu
Sounds like the cable is fraying in the bootlid hinge, or there is a faulty/loose connector.
Which green socket did you plug the fakra cable into? Left or right? (looking form the back)
Right if I remember correctly, if it doesnt work, try the other side :)
@@killerhertzmercedes Thanks, will try!
@@killerhertzmercedes It was the right green socket (from looking at the back of the unit)
Thanks!
Hi i do the same but I still have black screen...no view from the camera
@@ionutbanica7486 have you just installed it?
2012 C180 audio system is working but all speakers are noise coming.. how to fix it. I couldn’t find dashboard fuse box. Please help me to fix my car
Hi, could you please write the s/n of the cables please? I have already bought all the materials needed and im looking for the cable😀
Im afraid I sold this car nearly 4 years ago now. Try emailing mbenz.nl who supplied it.
whats the part number for the module and power harness + leads ?
Can you tell me please where did you plugged the signal cable in the SAM unit? One is power other is ground where the signal goes. Thank you
Hi, I used a Multimeter to locate a live pin within the SAM, then use the nearby earthing point on the chassis.
@@killerhertzmercedes
Yes thats Power (+) and ground (-), but where's the 3rd cable for the Signal???
You didnt Show it in the Video. You Show only how you install Power and ground.
@@killerhertzmercedes
????
@@z.m.5612 signal input is really from "Reverse lights" - You can pick it up near SAM source or trace it from the rear LED lights.
Every car model has different wirings specific colors (need to get diagram for your VIN # for a 100% match)
👍
Hello, i have MB vito 2017 for activate menu extended? thank you
Hey, really struggling to get the black plastic strip off, any advice? I have disconnected the lock and all the wires. I have squeezes the licence plate light clips but still not moving. I thought it might be the handle but I see that goes out with it
Yeah I remember that being really tough - there is a plastic 'C' bracket which goes between the handle and the locking mech if I remember correctly and that needs to be slid out (I could be wrong as its was over a year ago!)
Awesome very informative, just little confused, the original wiring harness came with green connector which goes to the rear sam unit, however do i need to open the fuse carrier in the kit and insert in the fuse carrier on the car or wire? a bit confused why they supply with the harness when it’s already there? Thanks for your reply.
Both have green connectors but are ever so slightly different sizes (if I remember correctly!)
What was the little Mario for at 4:00 mins? Lol
It's an Easter egg in all my videos 😁
Hi, I would like to do the same retrofit for my 2015 E220 Saloon. Do you happen to have the part number for the kit from Mercedes? Also do you fitting? If so could give me a price? Many thanks in advance.
Where did you mount the voltage module? I don't see that. Link to time in video please.
15:00 and you can see where I have positioned it.
@@killerhertzmercedes - Ok but you don't list the parts. Many of the sites will cross reference the correct part. If you can please update your description.
@@The_McD each car offers similar Cam option but specify different part# that exactly match car trim.
Hello i ave the same Comand of you and as many dificilt to instal the Reversing camera rear please tel me more how conect the camera in the Comand I dont know the suich green?? Or brawn or yellov??
Green, as per the video :) - however I have the Digital TV tuner on my car.
Okkk thanks so much
Now are Ok i ave conected in the Green 2end Right and my camera i worck perfect 👌 Thanks again ) hother suich are ocuped in the hole Green ) i ignore for server this suich ????
@@giorgiomurroni9698 yep, same as in the video. The other plug is for iPod video
@@killerhertzmercedes ok thankssss Again is very important for me Okkkk Great Video 👌👌
I do all same like u in Video with same Part numbers and I also switch the grenn Socket from left to right and it didnt work.
ouch... did you enable the right options through screen menu??
What happens when you switch into reverse?
Have you done any schematic troubleshooting?
@@glasser2819
The New modulator was broken
Great video
Glad you enjoyed it
I have a s550 it has the actual camera in place when I put it in reverse it only shows the check your sorrounding lines. I checked fuse and there is no fuse it only has one wire contact instead of two. Any idea how to fix.
likely a break in the wiring between the camera and the COMAND unit
@@killerhertzmercedes but wouldn't it have a fuse or at least a second wire in the fuse box. Because according to find it is equipped w back up cameras in reverse of two or at a second to get enough to take care and I will let it get back up wddng7bb7aa343480
I bet you a soda the wire brake is where rear HARNESS MEETS THE TRUNK bundle... don't just go poping your front console to see the video connector is plugged in solid!
👍
just wondering if its possible to retrofit parking sensors to an a class with none i have a bumper available with pdc, is this already in the main consol or will it be a tricky one. i heard that all the data for everything is in the centre consol it just needs to be turned on via a mode?? a180d se 2015
You will need to get the car re-coded on the Xentry system.
@@killerhertzmercedes thank you so much =) merry xmas
Can you tell me if its the camera or wiring. Have Mercedes e250 2013 estate and if I do settjngs fkr camera with straight reverse lines camera works but if I change setting to get moving grid line and car sensor theres no picture do you know dk I need to buy a different camera thanks
The grid/moving grid is a newer version of the COMAND system, you cant enable it unless you replace all your COMAND system £££
I suppose it's possible to retrofit camera on c class estate w205 2017? Would guidelines show up?
Best regards,
Yes they would :)
@@killerhertzmercedes Thanks! And thanks for great vid, too.
it's hardly amazing bargain priced '17 Honda (ACURA in US) have all these must have options built-in including leather seats... plastic seats are not available such as in E-class
Very informative, thanks.
Can the message to check surroundings can be disabled or change language ?
afraid not...
Bonjour où acheter le cable qui se branche sur la camera merci
Is there any kit that works for a w205 C-klass with a ntg5 unit
Should be avaiable via special order from MB
BTW 3:58 😉
Is it possible to locate at the center. It should be at the center when reversing.
The handle to open the bootlid is in the centre so it cant be located there. Its only slightly off-centre which makes no difference.
@@killerhertzmercedes I did pay the professional to install mine same spot as U but on the screen shows the line wasn't straight when reversing., Yes It does make a difference. Not saying at the boot button but maybe drill in a lower part like number plate and under the rear bumper. As in all instructions for a reverse cam says must b at center.
@@moonmc1047 try mounting it under the rear bumper to see how fast it gets covered with road dirt... 😅
@@glasser2819 nah there is the one they sell the cam is right next to the trunk handle for this car. Not this one
@@moonmc1047 I got mine also installed at the right corner of the boot and I was wondering if it's ok to not be in the middle
The aftermarket camera that is fitted to my 2013 mercedes c class has stopped working after doing a factory reset of the head unit, all I see is a black screen. The system info is as follows:
MCU Ver: 615085dFY-N4.5-G-D-C-200113
APP Ver: Ksw-P-Userdebug__OS_v3.8.7
System Ver: 9-8953EA
MCU Upgrade
System Recovery
Any ideas how I might get the screen to see the camera again?
Brian
Best to take it to an audio specialist to have a good look in person. Could be many things :(
KillerHERTZ Mercedes Modifications thanks for that. It was a complete shot in the dark that you might know, seems odd as it worked just fine before i restored the factory settings. Thanks again, great channel by the way 👍
It's likely to be something very simple, a cable that has a kink in it, or a plug has come undone? Sorry can't really be of more help
Thanks for feedback!
I dont understand, the green video cable. How did you fix it?
You just clip it into place... is that what you mean?
Hello is there a same kit for the W211 2006?
Only the W212 as far as im aware...
What is the approx cost of the parts and can this be done on a 2013 E class estate?
Hi, Looking at arounf £700 for all parts + painting.
Hope you don’t mind me asking, but how much was the kit from the dealers?
about £300 all in.
Where can I order this
well worth it if you DIY the labor
...why have you got Mario running across the grass at 3:56 ?
Hidden in all my videos :)
Great vid, thanks
could this work for a w205 c class?
You would need to get it coded on the system however, there isnt an option to enable it manually.
Is reverse cam availabale for ml250 2013
Yes
Shame you didnt show how to remove the trim but good video regardless
Got to keep my trade secrets :)
Where can i get all the components from?
Either your local Mercedes-Benz Dealership, or MBenzNL (as per the video).
Link for any of this stuff?
Its a kit from Mercedes dealership - unlikely they still supply them now however. :(
Where you put the module ?
Its in the video :)
Hello, I have seen the video 10 times and you do not see where the module is please, I could tell me where it is to change it. thank you.
@@yuniororo968 15:10 :)
Do you know the part numbers or kit number for W207 pre facelift?
No sorry, if you visit your local MB dealership they should be able to help.
KillerHERTZ Mercedes Modifications Ok i will go and ask them. Thank you for replying 😃
Link to product?
If you contact your local dealership they can give you a price for the kit.
3:57🥸 Super Mario
Hello from Ireland! Great video, I followed it all to the end but... no signal is on my camera. May I ask you to contact you by email with all my details and photos included? You might push me to the right direction.
Where did you get this camera? Did you get the panel that holds the camera?
@@Dia_dhuit all parts from ebay. And about the panel - this is my other project which is waiting for the camera to start working first. Ib bought panel with electrical openning button in it. So I will stick my camera into it then.
First!
Second
The music is freaking annoying. Ad Nauseam