The new king of hobbyist 3D Scanners - Creality CR-Scan Otter
ฝัง
- เผยแพร่เมื่อ 8 ก.ค. 2024
- Creality's newest CR-Scan Otter might just be the best hobbyist 3D scanner that I've used. I put it's claims of 0.02mm accuracy and a scanning range of 10 cubic millimeters to 2 cubic meters to the test!
Thank you SainSmart for providing this scanner for review!
---------------------------------------------------------------------------
Find more information about the CR-Scan Otter 3D Scanner:
Sainsmart: www.sainsmart.com/collections...
Amazon: amzn.to/3xy2rDM
Creality: www.creality.com/products/cre...
---------------------------------------------------------------------------
Create a free profile at www.3dprintlog.com today, and start recording all your print settings and filament usage!
---------------------------------------------------------------------------
👀 See my recommended printers, filament, and accessories on my Amazon Idea Lists!
🆕 3D Printing Equipment for Beginners: amzn.to/2PNblSL
⚡ 3D Printing Equipment for Intermediate Hobbyists: amzn.to/2OOuQOy
💯 3D Printing Equipment for Advanced Users - Liquid Resin SLA/DLP: amzn.to/2PpqWuK
🎁 See the TEVO Tornado on Amazon: amzn.to/2TnhQhn
🎥 Hoffman Engineering TH-cam/Video Equipment - See on Amazon: amzn.to/2O9oP9I
🆕 Microphone - Sennheiser XSW-D Lavalier Set w/ ME-II - amzn.to/2F6ORYY
Thank you to all my Patreons for helping make these videos possible.
Special thanks to my tier 2 and above patrons:
* Aaref A.
Christopher Hoffman
Hoffman Engineering
www.hoffman.engineering
[0:00] Intro
[0:20] Disclaimer
[0:38] Specs
[2:25] Software - Creality Scan
[2:46] How to Scan
[3:21] Aligning multiple scans
[3:45] Processing Scan
[4:10] Post-Processing
[4:25] Example - Owl
[4:35] Example - Octopus
[4:54] Example - Skull
[5:07] Example - Kerbal
[5:17] Example - Vault Boy
[5:32] Example - Voronoi Bulbasaur
[5:42] Example - Miniature
[6:17] Example - Dragon
[6:27] Example - Master Chief Helmet
[6:52] Example - Gold Lion
[7:02] Example - Stadia Controller
[7:16] Example - PS4 Controller
[7:33] Example - Face Scanning
[7:51] Example - Body Scanning
[8:17] Initial Firmware Issues
[9:23] Conclusion
[10:06] Pricing
[10:27] Outro
#SainSmart #Otter3DScanner #hoffmanengineering - วิทยาศาสตร์และเทคโนโลยี
![[안방1열 직캠4K] 베이비몬스터 치키타 'FOREVER' (BABYMONSTER CHIQUITA FanCam) @SBS Inkigayo 2404707](http://i.ytimg.com/vi/Tn3bGHiBWkg/mqdefault.jpg)
It would be nice to have some kind of test to check the accuracy. For example scan screws of different diameters and print them. Than test what is the smallest diameter which fits the corresponding nut.
That wouldn’t be accurate. You need to measure points in the point cloud. If you print it you add the printer tolerance. The printer x/y calibration, Flow calibration, pressure advance calibration and material shrinkage.
The accuracy of the scanner is listed as 0.02mm. In general that means around 0.05mm accuracy in real world scanning.
You can use cloud compare to measure point cloud distances for example.
Came a long way from the kinect scans
The otter and raptor are really an amazing contribution to so many fields of technology.
Thank you so much Creality, I commend you for your tireless efforts to help progress humanity.
I had a thought/ brainstorm, could you use a clear transparent base to locate the octopus on.
That way you could scan right through the underside of the base, and create data without having to flip it over?
Food for thought.
Please keep making informative content on how to use the Creality scanners.
🇦🇺🤜🏼🤛🏼🍀😎☮️
I appreciate the comments! I agree, the Otter is a pretty good leap compared to similar handheld scanners of just a year or two ago.
The transparent base is interesting. I'll have to see if I have anything that's transparent to infrared light. But if you can find a base like that, then I think that would work!
The otter creates a more dense mesh if you use markers. Markers are a must have when scanning featureless frames.
That’s the best advice I can give, right there!
🇦🇺🤜🏼🤛🏼🍀😎☮️☮️☮️
I think you’d freak out if you performed all of the same scans with the Creality Raptor hybrid blue laser- NIR scanner.
The detail it can capture is mind blowing
🇦🇺🤜🏼🤛🏼🍀😎☮️
I've seen really good results with the Raptor. I hope to get the opportunity to test one out and see how it compares with the Otter.
are the 3D scans size accurate, or do you still have to scale them after to the original size of the thing you scanned?
I don't know how I didn't mention it, but yes, items are scaled accurately on export.
did you notice any difference/improvment from the last update?
I only did extensive testing on the one version shown in the video. As I was finishing editing there has been a new version of Creality Scan released, but I have not been able to put that new version to the test yet.
How does it compare to a Revopoint Mini?
Unfortunately I have not had the chance to try the Revopoint Mini. I'll try and get my hands on one though to test out.
The Otter gives better results than the Revopoint Pop2 I last used, but that is a few years older and less expensive, so not really a fair comparison.
Thats a far way from using the xbox as a scanner. 😅
Cool!
What about motocycle or car parts. I guess if it handle a full body, might be good for motocycle but not sure for a car.
With markers, I'd expect car and motorcycle parts to work pretty well. Creality has examples of a full car body on their website. You'd need to use a laptop for it, since you'd be moving around a large area.
They have to improve the software. No orthogonal view what it makes deleting stuff complicated and it’s deleting the original scans after merging.
No alignment function to a coordinate system. No auto alignment using markers when fusing 2 body’s. (As far I know. There is no check mark to select for Auto alignment)
That is a good list of suggestions right there! The alignment workflow could definitely be approved, it was the only part where I struggled.