25 year driver here, its nice to see an eaton 10 speed in a pickup...take care of them and don't grind the gears and they'll last a lifetime. Make sure you bop the throttle a little bit more when you downshift but other than that I can watch that all day long. Good job!
With 4 years OTR experience, agree on a bit more throttle on the downshift. These transmissions are not synchronized and have to be RPM matched. With typical Class 8 truck 3.42 - 3.23 gearing, you should be coming up at right around 400 - 500 RPM between gears. How did you make the splitter work? I'm pretty sure this is air-actuated, and I wasn't aware that a 5.9 Ram had an air compressor.
@john Chandler I'm sure it's possible, I just wasn't sure if air was actually required to operate the splitter or if it was simply an air controlled solenoid. I've seen someone cobble up an air compressor on a 300 Ford inline 6, so anything's possible.
When I was young. My Father would pick me up on Fridays in his Mixer. He had to shift 2 handles to get that thing through the intersection. It was very loud inside the Cab. To this day it still amazes me. V.
Sweet 🏆! 10 & 13 speed Eaton-Fuller transmissions are virtually indestructible, million mile plus transmissions. Change the synthetic fluid every two years as recommended by Eaton warranties ( Mobil or Shell Synthetic Straight 50 gear oil) and this will be last transmission that you will ever need. The wet clutch and brake, as well as the rear helicoid gears on the synchronizer box do tear-up with dirty fluid.
Don North yeah, it's possible. I've heard through the grapevine of a few guys that have done it. Obviously some mods are required. I guess anything is possible if the wallet is fat enough. 😁
@@robertbronson7863 They dont make true Jake brakes for the smaller cummins engines that mount between the rocker box and the head the ones you are talking about are exhaust brakes that are on the exhaust pipe.
That is exactly what I need, looking for more forward gears the G56 is not enough. What model of eaton fuller trans am I looking for and do I need a adapter for it.
After watching and hearing how hard that engine is working I'll be scrolling hoping to find what the payload was and what sort of speed that truck is capable of and what final drive your dad decided for the rear/front differential. That truck was SERIOUSLY working and obviously pulling off that trans swap is super super rad I'm not even going to front one bit. SUPER cool for a geek like me. K bye
Dad got that seat pulled waaay up. Sweet vid. With those stacks n tranny I bet this is one pulling machine. I own a 99 2500 dodge cummins 4x4 but it's a slush box 325K
Sir can you PLEASE tell me how you got an Eaton in your Dodge??? I'm also about to do the same thing as I tow(tractors, stump grinder, tree logs, gooseneck trailers, etc.) a lot for my business. Mines a 24 valve Cummins in the 01 3500. Is there a new bell housing and clutch pedal kit available, or how does that work?????????? Please get back to me soon, or someone that knows how to pair these two and get everything functional......
i need one of those😃😃 I spent a bunch of money to get horsepower out of my rebuilt 12 valve and i gotta keep it turned way down so I don’t break the porcelain glass nv4500 Does that bolt right to to the 12 valve Cummins? with 4 wheel drive.
Good i want one of those so bad just to hear the Diesel engine end that turbo with Eaton fuller 10 speed man . Im a truck driver but driving a international box truck with Eaton fuller automatic 6 speed nothing like standard
Who do i get in touch with about this build? Im doing a similar build in a 1994 f350 crew cab long bed dually with a 1995 cummins swap. Building a heavy hauler and have questions about this.
Cool concept, but not necessary in a little truck. 6 spd is plenty with what a pickup can legally tow. I drive a KW with a 13 spd, and when I get home after being out 2-4 weeks, I don't wanna run through more gears. But to each their own
hey man nice video. hey I have a 96 Dodge 3500 that I use on my business tuck. i have the 5 speed nv4500. but I'm having problems with the transmission I rebuilt it twice already and refuse to do it a third time I seen your video and I want to take out the NV 4500 and put in something bigger so the engine can handle it I would like to know what kind of clutch did you use with the Eaton fuller RTO 6610 and what bell housing and did you have to make any special mounts for the transmission to make it fit and did you have to change any parts of the transmission to make it mount up to the 5.9 Cumminsand what about to drive shafts I know it's a lot of questions but I would love to have my truck working rite. please let me know thanks
will the 10 SPD fit on the 4bt I was told it would since the housing are all the same for the 4bt 6bt and 6c!?? you shit the 10 with no clutch except for starting off ??
To me that would get old in about a day. I drive a commercial truck for a living and the last thing I'd want to do is row through gears unnecessarily in my light duty truck. To each their own though.
He has another video where he’s towing a pretty large trailer. It makes a lot of sense if you’re not lazy since the transmissions in these things really suck in comparison. He can skip gears whenever he wants also so I don’t think it would be too bad when unloaded. Edit: you can also see in his rear view mirror at one point he’s got a trailer hooked up
@@josephsamsor1698 Why do you say "the transmissions in these things suck" ??? I have a 2002 with NV5600 in it and never had it rebuilt in 180,000 miles! I live in hilly New England and tow machinery around almost every day! Would I like a 10 speed? HELL YES !!!! But the factory 6 speed is no joke. Now the NV4500... well that's another story.
![[ไฮไลต์] แบดมินตันชาย SHI Yu Qi (จีน) vs วิว กุลวุฒิ (ไทย) รอบ 8 คน | โอลิมปิก 2024](http://i.ytimg.com/vi/f7z7taforOM/mqdefault.jpg)
Who needs the car stereo with this beautiful sound?
Amazing how often I catch myself with my head unit on “ standby “ meanwhile she’s whistling Dixie all over town 😎
Yeah I always drive my Chevy with no songs I like to hear the old block
I’m the same way lol
Hell yeah it sounds beautiful
who needs syncros whem you could just grind it?
It's a rto 6610 worked clutch with the factory slave and master cylinder. Thanks for watching please subscribe
(spanish) Hola, tu instalaste la transmisión? Tienes videos o fotos de como esta instalada, gracias
That`s a mans truck... i bet the exhaust has testosterone in it....
Haha! That truck will turn you into a sexual-tyrannosaurus!
A goddamn sexual-tyrannosaurus*
That's right, as Jesse Ventura would put it. I don't use that word.
@@gentlemensedge5503 You are not Doug Stern. What's up?
that deep throaty roar though! just speaks to my soul. love the way those engines sound! best out there by far.
25 year driver here, its nice to see an eaton 10 speed in a pickup...take care of them and don't grind the gears and they'll last a lifetime. Make sure you bop the throttle a little bit more when you downshift but other than that I can watch that all day long. Good job!
With 4 years OTR experience, agree on a bit more throttle on the downshift. These transmissions are not synchronized and have to be RPM matched. With typical Class 8 truck 3.42 - 3.23 gearing, you should be coming up at right around 400 - 500 RPM between gears. How did you make the splitter work? I'm pretty sure this is air-actuated, and I wasn't aware that a 5.9 Ram had an air compressor.
@john Chandler I'm sure it's possible, I just wasn't sure if air was actually required to operate the splitter or if it was simply an air controlled solenoid. I've seen someone cobble up an air compressor on a 300 Ford inline 6, so anything's possible.
@jared price 6.4 PSD LOL
@@anonymousinc6330 i have an electric air compressor for the air bags on mine. Just ran another line from the air tank to the splitter.
@@anonymousinc6330 i have an electric air compressor and working on converting an air conditioning unit to work as my air compressor
When I was young. My Father would pick me up on Fridays in his Mixer. He had to shift 2 handles to get that thing through the intersection. It was very loud inside the Cab. To this day it still amazes me. V.
vaccumme twin stick Mack I bet.
love dodge trucks simply the best diesel trucks
Fernando Rodriquez good motor yes. The best truck? No.
@@gabrielfigueroa209 Why not ? Please tell us your knowledge oh wise one. What is the "best truck" ? let me guess, the one you own.
Sweet 🏆!
10 & 13 speed Eaton-Fuller transmissions are virtually indestructible, million mile plus transmissions. Change the synthetic fluid every two years as recommended by Eaton warranties ( Mobil or Shell Synthetic Straight 50 gear oil) and this will be last transmission that you will ever need. The wet clutch and brake, as well as the rear helicoid gears on the synchronizer box do tear-up with dirty fluid.
Time to do this to my old 97 12V. Nice Job!!
Honestly, that's actually pretty approved! Love it!
Man!! You look like a real trucking movies!! Nice shoes
Love that song turbo diesel 10 speed music to my ears
this is awesome, I didn't think it was possible to put an Eaton Fuller 10 speed in a pickup truck lol
Don North yeah, it's possible. I've heard through the grapevine of a few guys that have done it. Obviously some mods are required. I guess anything is possible if the wallet is fat enough. 😁
Actually cheaper to do an rto 6610 than rebuild an nv4500
Some guy put a 13 speed in a pickup
It’s been done
@@charliegijones idk about that- $1500 for all new and updated shafts, gears, synchros and bearing rebuild kit on NV 4500. Not much cheaper than that.
That. just. sounds. So. Wonderful.
That thing must pull real nice!!!
Ikr
Nice video. Was sent here from c-10 with 453 Detroit
That sound, good golly I love this fuc'n TRUCK WOW
That clutchless shifting is badass 🤘
😂 you dont use clutch with semi transmissions no synchro gears gotta rev match manually
Technically still need it for starting or stopping.spent many a day in a truck watching my dad drive then started to myself
I am curious if a clutch brake was installed or not though. If so how was it done with the 5.9L cummins.
Thanks.
Wow that Dodge sounds Awesome.. I'm buying a 12v this summer....
Bad ass truck love it
My dad would have loved to have one of these in his pickup trucks
Now put a jake in it... 👌🏼
Thunder Brake🤘
It has an exhaust brake in it
You can’t put Jake brakes in small pickup truck engine. Jacobs never made heads for small cubic inch pickup truck motors
@@shortthrow50 PacBrake makes them and Jacob's brakes made them for the 5.9L
@@robertbronson7863 They dont make true Jake brakes for the smaller cummins engines that mount between the rocker box and the head the ones you are talking about are exhaust brakes that are on the exhaust pipe.
Ya se siente trailero el compa😅😅.. very nice video.. nice dodge ram..
That is exactly what I need, looking for more forward gears the G56 is not enough. What model of eaton fuller trans am I looking for and do I need a adapter for it.
After watching and hearing how hard that engine is working I'll be scrolling hoping to find what the payload was and what sort of speed that truck is capable of and what final drive your dad decided for the rear/front differential. That truck was SERIOUSLY working and obviously pulling off that trans swap is super super rad I'm not even going to front one bit. SUPER cool for a geek like me. K bye
simply awesome!
Awesome.
I want one too
what parts do need for installation for the transmition 10 speed and what truck you took parts from?
Is there any chance I could have all info on how you went about coupling the motor to trans ?
sweet sound
Is it still 4 wheel drive? If so are you using a divorced transfer case or do they make a tailshaft adapter
nice dash. not all cracked up like the typical dodge
I got three of 'em, not one crack. Maybe you're from FLA
Do you have a list of all the b
Parts you used to make this all work
That's why I love my 97 Dodge Ram 5 speed more than my others 2 Ram I owe 3 Ram 2011 2014 and my baby 97 dodge
Dad got that seat pulled waaay up. Sweet vid. With those stacks n tranny I bet this is one pulling machine. I own a 99 2500 dodge cummins 4x4 but it's a slush box 325K
How was the fit in the tunnel? Any body lift?
That's a super short throw!
Do you use an electric air pump to generate air pressure for the splitter?
Did your Eaton Fuller Transmission use 2" Input Shaft to fit Cummins or different size?
Sir can you PLEASE tell me how you got an Eaton in your Dodge??? I'm also about to do the same thing as I tow(tractors, stump grinder, tree logs, gooseneck trailers, etc.) a lot for my business. Mines a 24 valve Cummins in the 01 3500. Is there a new bell housing and clutch pedal kit available, or how does that work?????????? Please get back to me soon, or someone that knows how to pair these two and get everything functional......
Does it easy fit without big changes? I have a PSD and a 18 speed fuller with torque converter.
Goddddaaaammmm fine ass truck driver wow
Very badass
i need one of those😃😃 I spent a bunch of money to get horsepower out of my rebuilt 12 valve and i gotta keep it turned way down so I don’t break the porcelain glass nv4500 Does that bolt right to to the 12 valve Cummins? with 4 wheel drive.
I would love to put a EA-10 in my CR!!! how did you make it work?
lots an lots of work!!
but i like it
Nice!
that good dodge dually for heavy load
Ficou muito bom, o mesmo câmbio que tenho no meu caminhão!
NICE TRUCK, IF YOU HAVE INFO. ON WHERE TO GET PARTS AND WHAT PARTS YOU NEED TO CONVERT IT OVER PLEASE LET ME KNOW.
That thing deserves stacks
Good i want one of those so bad just to hear the Diesel engine end that turbo with Eaton fuller 10 speed man . Im a truck driver but driving a international box truck with Eaton fuller automatic 6 speed nothing like standard
Now that's a work truck
He has an older transmission cause the shift pattern is an over drive. The newer over drives use the direct drive shift pattern pretty cool though
Instead of going back down for 4 and 9th gears?
I need to know how it was installed/parts/modifications please
Would this be able to work in a 2003 4wd cummins?
It's easier to find the gear you want to start in, if you've come to a stop in gear, rather than neutral.
Hey what’s the part numbers for the bell housings and clutch
I'm thinking build a truck like yours......could you please provide me the info I need?
All the parts you used and where I can buy them.
muy buena combinacion
Hey I am thinking about how to do this is there any way I can email you and talk about how y'all did the conversion?
Nice shifting dude. Good rpms.
Keep the positive feedback coming
2 inch body lift or suspension lift?
Too cool. Rather have that then my 6 speed though.
So how hard is this swap and what did you Modified to put it in
Who do i get in touch with about this build? Im doing a similar build in a 1994 f350 crew cab long bed dually with a 1995 cummins swap. Building a heavy hauler and have questions about this.
nice
Thanks man
Is this an aftermarket conversion?
What bell housing and clutch did y'all use
Probably a sae 2 flywheel and housing and a regular Eaton clutch
You guys in the us get to do this is Australia its hard to do it
You can skip gears when you are not pulling a heavy load. Will get old after while around town but cool set up man!
A real tow truck
P.S.- I've watched this video about 15,000 times.
Cool concept, but not necessary in a little truck. 6 spd is plenty with what a pickup can legally tow. I drive a KW with a 13 spd, and when I get home after being out 2-4 weeks, I don't wanna run through more gears. But to each their own
I was just about to start working on that myself and I was like I’ll TH-cam it and see if anyone else had the idea except I thought of 13...
Wonder what charger he’s running ?
hey man nice video. hey I have a 96 Dodge 3500 that I use on my business tuck. i have the 5 speed nv4500. but I'm having problems with the transmission I rebuilt it twice already and refuse to do it a third time I seen your video and I want to take out the NV 4500 and put in something bigger so the engine can handle it I would like to know what kind of clutch did you use with the Eaton fuller RTO 6610 and what bell housing and did you have to make any special mounts for the transmission to make it fit and did you have to change any parts of the transmission to make it mount up to the 5.9 Cumminsand what about to drive shafts I know it's a lot of questions but I would love to have my truck working rite. please let me know thanks
jah son
Not trying to be mean but if you have to even ask some of the questions you did, you prob don't want to try tackling that job bud.
It’s got a clutch brake right?
This is the first time I've seen an Eaton-Fuller transmission on something that isn't a semi.
How much does this typically cost to do
I'ma still gonna put a gear venders behind my 4-speed automatic. In the shop for One (1) day!
how is the throw between gears so short? it seems like you barely have to move the shifter at all vs when I had a Pete with a 10 speed
Kyle Hurd
Shorten the stick, and the throw will shorten.
It's linkage and the length of the stick
There is no linkage bro
Can you do this in a 4x4 setup?
will the 10 SPD fit on the 4bt I was told it would since the housing are all the same for the 4bt 6bt and 6c!?? you shit the 10 with no clutch except for starting off ??
mike hickson that how all semis are
mike hickson with the correct adapter plate. 12v 6b is the same as 3.9 4bt.
Rto 6610 eaton fuller 2 inch lift kit
How'd you do it putting a big rig transmission on a pickup truck???
How much to do it and where can I get done like that
Did he have to cut up the floorboard to make it fit?
i dont think so a 10 spd fuller is only slightly bigger then the normal 1 ton manual so he probably just dented the floorboards
Is that hx35?
What kind of Dodge Vehicle is this?
That's crazy we run a eaton fuller on r 18wheelers on the farm
To me that would get old in about a day. I drive a commercial truck for a living and the last thing I'd want to do is row through gears unnecessarily in my light duty truck. To each their own though.
C H same here. I just assume this a guy that's a wanna be trucker so he put stacks on his truck and truck trans in it
Exactly what I was thinking!
5-6 speed is great for a daily driver, 10 speed a little too much
He has another video where he’s towing a pretty large trailer. It makes a lot of sense if you’re not lazy since the transmissions in these things really suck in comparison. He can skip gears whenever he wants also so I don’t think it would be too bad when unloaded.
Edit: you can also see in his rear view mirror at one point he’s got a trailer hooked up
@@josephsamsor1698 Why do you say "the transmissions in these things suck" ??? I have a 2002 with NV5600 in it and never had it rebuilt in 180,000 miles! I live in hilly New England and tow machinery around almost every day! Would I like a 10 speed? HELL YES !!!! But the factory 6 speed is no joke. Now the NV4500... well that's another story.
That's American !!
Actually, sorry to say, that truck was made in Mexico!
any idea how much it costs for this type of setup?
Omar Vazquez the transmission is about 2 to 5 thousand
What model 10speed is it
eaton fuller rto 6610 used in mid-duty trucks
I didnt kno you could get a 10 speed in a box shift pattern. Acts more like a blue button 8 spd box shift
Just one axle short of a semi. Beats hittin the scales at every stop I guess.
Nasty