I wish I had a saw this video before I paid Harley to do a stage two on my bike I would’ve rather for you to get that money. Oh my gracious I didn’t know you did work on the side. I’m hurt right now I know I know in the future if I decide to do something, I’m gonna holler at you first right across the bridge in Fortwashington, Maryland. Getting ready to check out this new motorcycle seat you got keep the videos coming my brother.
Love the D&D, But, I purchased a Fuel Moto Jackpot RTX header 2 into 1 from someone who runs this channel & man IMOP it's the closest thing to a Thunder Header! & the performance is immediate!!
@@BaggersandBourbon that’s what I’m hearing/reading. Just bought my first blacked out bike, always had chrome before. I have a chrome D&D for 7 years and other than some be try minor discoloration at the muffler/headpipe joint it held up fantastic. Actually I thought it complimented the bike well. What do you re spray the pipe with to obtain the black coating again? Thanks
Question for you…… I have a 2022 Road Glide special, I want to wake the bike up and get that coveted “CHOP”. What cam do you suggest and what exhaust do you suggest?
@@MrHavoc5252 is it a 114 or 117? You can use CR485 cam you can’t use a star 30/30 or F35 just change out valve spring with the F35that cam. Now exhaust D&D,Jackpots RTX,Sawicki Full Length, Bassani high horsepower or a Thunder-header
@@BaggersandBourbon my heart is with the Thunderheader but they sound wack on the M8, any suggestions to change that, I don’t want to do extensive motor work; I don’t ride like that. I want the sound, low end torque and to go long distances without beating up the bike. The sound is what I’m after….. Chop is #1 to me
So he bought the screaming eagle oil pump and plate. He bought new Tappets and pushrods and tappet cuff. Also he bought the cam separately. Now you can go on fuel moto and buy the oil pump and plate kits which that comes with all gaskets and pushrods and orings. It may allow you to select your cam of choice but at a while ago it would only allow the s&s475
You do make it look easy, RESPECT Sir!
@@georgemitchell9315 man it really is bro. Just have to have the tools
I wish I had a saw this video before I paid Harley to do a stage two on my bike I would’ve rather for you to get that money. Oh my gracious I didn’t know you did work on the side. I’m hurt right now I know I know in the future if I decide to do something, I’m gonna holler at you first right across the bridge in Fortwashington, Maryland. Getting ready to check out this new motorcycle seat you got keep the videos coming my brother.
Yeah bro I get busy with the bikes. That seat was is awesome
Great work what lifters did you use?
I used S&S
Thanks
Nice job sounds sic, I run D&D w a 475 love it👍
Man the sound they give is so right. Man a D&D on a twin cam is different
Meet you this weekend at Kingz of the South annual. Keep doing what you doing bruh.
I appreciate it bro.
Love the D&D, But, I purchased a Fuel Moto Jackpot RTX header 2 into 1 from someone who runs this channel & man IMOP it's the closest thing to a Thunder Header! & the performance is immediate!!
😅😅😅😅😅😅 I be trying trying to put people on 🤧🤧
How does the coating hold up on the D&D black out pipe? Thanks
@@Peterbilttrucker it’s holding up well from what I see. But over time you will need to get them resprayed due to heat
@@BaggersandBourbon that’s what I’m hearing/reading. Just bought my first blacked out bike, always had chrome before. I have a chrome D&D for 7 years and other than some be try minor discoloration at the muffler/headpipe joint it held up fantastic. Actually I thought it complimented the bike well. What do you re spray the pipe with to obtain the black coating again? Thanks
@@Peterbilttrucker black ceramic coat heat resistant
@@BaggersandBourbon awesome, thank you!
Nice work 👍🏾
Thank bro. 😎
@@BaggersandBourbon ✊🏾
Great work bruh! Do you install cams on twin cams?
Haven’t done one yet. I’m actually about to do a twin cam on one of my club brothers bikes first then I’ll be rolling
@@BaggersandBourbon let me know how it goes, if it goes well, I got some work!
@@travispierce6690 I will let you know bro. 😎
Where's the assembly lube, dry start goodness gracious. I hope that motor runs top notch!!!
Assembly lube was added. Actually the motor hit 140hp
@@BaggersandBourbonon stage 2 ?
@@Baggerdaddy702 yes stage 2
Dude you’re a bad ass!
Thanks bro.
Hey brother, What is the best upgrade I can do for a 2012 Road Glide. currenty 103 motor?
@@eltonbjones I would do a 124 crate
Any suggestions on where to buy it
@@eltonbjones fuel moto
@@BaggersandBourbon I'll give them a look. Should I keep the same trans and just get the motor?
@@eltonbjones you can keep stock trans. I have a stock one. Just upgrade you clutch basket and put a pressure plate on it.
Question for you…… I have a 2022 Road Glide special, I want to wake the bike up and get that coveted “CHOP”. What cam do you suggest and what exhaust do you suggest?
@@MrHavoc5252 is it a 114 or 117? You can use CR485 cam you can’t use a star 30/30 or F35 just change out valve spring with the F35that cam. Now exhaust D&D,Jackpots RTX,Sawicki Full Length, Bassani high horsepower or a Thunder-header
I have a 114. If it were your bike and you just wanted to piss off your neighbors, a ridiculous chop at idle, how would you set it up?
@@BaggersandBourbon my heart is with the Thunderheader but they sound wack on the M8, any suggestions to change that, I don’t want to do extensive motor work; I don’t ride like that. I want the sound, low end torque and to go long distances without beating up the bike. The sound is what I’m after….. Chop is #1 to me
@@MrHavoc5252 knowing what i know now CR485 or a F35 but with that cam you need new valve spring for F35. Then I would run a jackpots Rtx full length
@@MrHavoc5252 well with that got CR483MT and a jackpot RTX pipe. That cam will give you the low end you looking for.
What all comes with that Cam kit?
& that’s a Screaming Eagle cam?
So he bought the screaming eagle oil pump and plate. He bought new Tappets and pushrods and tappet cuff. Also he bought the cam separately. Now you can go on fuel moto and buy the oil pump and plate kits which that comes with all gaskets and pushrods and orings. It may allow you to select your cam of choice but at a while ago it would only allow the s&s475
@@egeromegilbert9118 the cam was a cycle rama 485.
I want that same set up Bro , my bike is black & gold plus my cam cover has a glass window on it so you can see the cam plate
I lived out there I would have you do my bike but I’m in Colorado now
Assembly lube necessary??
Yes it necessary. I put it on the cam, the G rotors and the inner cam bearing.
I missed it all being applied as well ;)
Great video subbed
Thanks bro.
Nice job my brother
Thanks bro
How much runout on the crankshaft ?
It was really non the bike has really no miles on it.
Morning, where u located
I’m in Chester VA
Big bore baffle?
@@keykey1960 yes
I have the D&D FatCat full system with a Stage III. Love it
That D&D is a good pipe and it gives great numbers with a cam.
@@BaggersandBourbon yessir!!! She def got some Go!
I would have to watch this video 100 times then I would probably second guess myself thinking I missed a step. How did it take to learn that?
Bro I actually learn off youtube 😂😂🤣🤣
Look at cycle fanatix 128 build and Doo work 128 build
@@BaggersandBourbon okay I will take a look a been want to learn it.
@@BlackJack-xz1sy also the table I have man is worth it.
Did he want 2 put in a SE intake manifold ??
good looking bike
Thanks
It’s sound like a Harley
Sounds good. That D&D sounds good
Not the point of the video. Just wanted to say. Beautiful neighborhood.
Thanks bro.