as someone who welds everyday, i work for a major car manufacture (hint micky fav), if you are not directly in front of the arc (the welder) you dont need an ADF (auto darkening filter) or a weld shield all you need is safety glasses that have a Z87+ rating. hats of to Even for wearing his safety glasses under his weld shield everyone i train i tell them to do the same. we use 3M ADF's n if the battery dies or if it fails or if someone is welding around you you really really, REALLY don't want flash burn. having that extra eye pro is a very smart move
By the way, so you guys know, Bellows are one of the greatest invention, its safety and efficiency has been implemented almost everywhere you have a system.
This came up on my home page today, nice build guys! Just an FYI, the throttle body is upside down, the TPS should be facing towards the motor and the throttle wheel should be facing away from the motor.
My father used to work for Ferodo and a number of people who worked on the stair tread department were constantly welding with Aluminium. Over the years 3 of them died from liver cancer. I don't know how accurate this is but it may be worth looking into to mitigate the risks. Stay safe
I've also been hearing that farmers are also at risk of cancer because of pesticides. However they have found a correlation with farmers that hardly sweat to have a high risk of cancer and those that do sweat a healthy amount to have a lower risk because they sweat out the toxins. They have also found the same among fire fighters that are exposed to all those toxins in fires. But that has at least led to fire departments now installing saunas so that fire fighters can detox after each fire.
I love how all your builds are truly unique, in the sense that you fab the parts you need rather than just buying pre built kits. The engineering knowledge of everyone really shines in these videos
If you guys can swing it, get a small MIG welder and set it up with stainless wire and the correct gas. Just for those jobs where you need to MIG weld or tack stainless.
I really like everything about this show this is a get down to Business crew about odd ball car buyers! Just very very thoughtful with someone’s memories of all things WOW I luv it!!
The exhaust is money. I love crooked mufflers but really the pipe is pretty strait underneath so its really a natural position for it. the least amount of bends = better flow.
I just want to say thank you guys so much for signing my 99 eclipse cluster cover it means a lot meeting you guys at San Diego cars and coffee with WD-40 it was a pleasure !! best birthday ever thank you so much ❤much love 🤙🏼🔥
Hey guys love your vids been watching for yeas now , as a welder I can recommend back purging when your welding the vibrant exhaust that will intensively improve your welds ! Remeber cleanliness ,prep and machine set up are key for welding machine and welder seem to be good enough to produce some great weld prep and fit up are great just missing the back purge ! Try it out ...
Love this one boys!! Also, as a former D2 college hockey player, I love the rod to hold the hood up! Lol… Lastly, being genuine here… I had worse acne than Quinn when I was younger… not sure if he even wants to get rid of it, but ask your dermatologist about Accutane…. It was my miracle drug man. It cleared my face up and it remained clear to this day. Much love!
That engine sounds roughly as hell! Fantastic job bring this car from junkyard POS state to this. Looking forward for the tuning and track videos to this car. Keep up the good work!
Bummer it took two tries but hyped you guys got it going! Been excited for this one to come together! cant wait to hear it under load and going down the road!
I love this build. I wish a little more high end materials and finishes were used on the interior but over all amazing. Wish I could own a car like that.
Why on earth would you swap a twin turbo v6 for a 4banger? I get that its unique, but with how heavy that car is, its going to feel slow as hell outside of boost.
You can do my car you can put your logo and info on it as big as you want like a billboard. I don't want anything crazy just a jdm H23 and it painted purple with green accents and 18" wheels
![Building a 1989 Nissan Skyline R32 GTS-T in 26 Minutes [TRANSFORMATION]](http://i.ytimg.com/vi/ZFfVfcBL6ac/mqdefault.jpg)
![+700HP SR20DET Engine Build - Full Start to Finish [4K]](http://i.ytimg.com/vi/TvqgprMMn8g/mqdefault.jpg)
as someone who welds everyday, i work for a major car manufacture (hint micky fav), if you are not directly in front of the arc (the welder) you dont need an ADF (auto darkening filter) or a weld shield all you need is safety glasses that have a Z87+ rating.
hats of to Even for wearing his safety glasses under his weld shield everyone i train i tell them to do the same. we use 3M ADF's n if the battery dies or if it fails or if someone is welding around you you really really, REALLY don't want flash burn. having that extra eye pro is a very smart move
Quinn is a true gear head ❤❤❤
Nah he is a blt on boy at best and even then he messes up
I've looked forward to this build since the start
By the way, so you guys know, Bellows are one of the greatest invention, its safety and efficiency has been implemented almost everywhere you have a system.
25:09 YES!!!
Please do more Rotary Content!
This came up on my home page today, nice build guys! Just an FYI, the throttle body is upside down, the TPS should be facing towards the motor and the throttle wheel should be facing away from the motor.
Holy crap has it really been that long? Love this build...so SICK!
Yesssss it sounds absolutely insane, custom exhaust really makes it too
man you guys are awesome your welding skills, communication and how you guys improvise for hangers! its a thing of beauty!
What a team! You guys killed it yet again. Loved the Cookie break!
My father used to work for Ferodo and a number of people who worked on the stair tread department were constantly welding with Aluminium. Over the years 3 of them died from liver cancer. I don't know how accurate this is but it may be worth looking into to mitigate the risks. Stay safe
I've also been hearing that farmers are also at risk of cancer because of pesticides. However they have found a correlation with farmers that hardly sweat to have a high risk of cancer and those that do sweat a healthy amount to have a lower risk because they sweat out the toxins. They have also found the same among fire fighters that are exposed to all those toxins in fires. But that has at least led to fire departments now installing saunas so that fire fighters can detox after each fire.
It's ALIVE... Great job guys... I likes it a lot!
Been following this build since the start. So excited to see it running
I love how all your builds are truly unique, in the sense that you fab the parts you need rather than just buying pre built kits. The engineering knowledge of everyone really shines in these videos
Love the 300zx sounds insane great work boys
It went from forgotten to legendary and it's all thanks to Throtl! Well done fellas!
Great build! Z cars were my first car love always glad to see an awesome job on one.
My favorite type of welding! Looking good there Evan.
one of your best projects ! love you guys ! keep it goin
If you guys can swing it, get a small MIG welder and set it up with stainless wire and the correct gas. Just for those jobs where you need to MIG weld or tack stainless.
That’s some slick work Mick
I really like everything about this show this is a get down to Business crew about odd ball car buyers! Just very very thoughtful with someone’s memories of all things WOW I luv it!!
Wow it's a sick beautiful car , I love it thanks guys ❤
This is my dream build… I’ve enjoyed every minute of this project. Thanks guys!
The exhaust is money. I love crooked mufflers but really the pipe is pretty strait underneath so its really a natural position for it.
the least amount of bends = better flow.
I just want to say thank you guys so much for signing my 99 eclipse cluster cover it means a lot meeting you guys at San Diego cars and coffee with WD-40 it was a pleasure !! best birthday ever thank you so much ❤much love 🤙🏼🔥
Hey guys love your vids been watching for yeas now , as a welder I can recommend back purging when your welding the vibrant exhaust that will intensively improve your welds ! Remeber cleanliness ,prep and machine set up are key for welding machine and welder seem to be good enough to produce some great weld prep and fit up are great just missing the back purge ! Try it out ...
Love this one boys!!
Also, as a former D2 college hockey player, I love the rod to hold the hood up! Lol…
Lastly, being genuine here… I had worse acne than Quinn when I was younger… not sure if he even wants to get rid of it, but ask your dermatologist about Accutane….
It was my miracle drug man. It cleared my face up and it remained clear to this day.
Much love!
That engine sounds roughly as hell! Fantastic job bring this car from junkyard POS state to this. Looking forward for the tuning and track videos to this car. Keep up the good work!
Dude, that need for speed M3 is sick! I Love that paint job.
so cool to see the whole process including when it doesn't go as planned
Bummer it took two tries but hyped you guys got it going! Been excited for this one to come together! cant wait to hear it under load and going down the road!
No back purging with argon?
Was it really a year and a half ago already?? Holy, time flies.
Epic build, great work team!
I love this build. I wish a little more high end materials and finishes were used on the interior but over all amazing. Wish I could own a car like that.
So were just not gonna talk about the gray silverado in the shop?
I love it! But I would've went with a duel exhaust. OEM +
This has been such a great build to watch!! Finally got an engine start!
For welding inox u have to gas shield from inside of pipe, and to clean it after welding use nitric acid
Quinn you f****** beast 💪🏼🔥🐐
I'm happy to see this after a year and a half effort...thankfully I see jimmy oaks do it years back inn 5 months lol 😅
By far one of my favorite builds its coming out perfect and i hvse always liked this car
exhaust system is MONEY!!!
Well done, fellas. I'm glad to see fruit from all the hard work and long hours. Keep it up 💯
I can see the happiness in Quinn and ricky❤
You just gonna have to love Quinn for his knowledge and his work! Letzgo!
Great work, guys!!! ❤
Do i see a single cab gmc back there 🤔
Can't wait to hear this thing rip! Looks sick!
Great job Quinn! Car sounds good ! Keep up the great videos
Sounds absolutely awesome
That engine sounds amazing let’s go can’t wait for the next episode
That exhaust sounds gooood!
That Silverado tho
I wish I went to work every day doing what Throtl is doing! This isn't even work, it's fun!
This is the most I saw Becky worked. Nice welding job Evan
ESTO ESTA DUROOOOOOO ! ! ! 🔥🔥🔥💪😎👍🔥🔥🔥
Love it when they fire right up. 👍
About time. Need more z32 vids
Why they got my dude ricky welding on the ground on his knees like a little kid playing in the sandbox by himself?😂🤣
So what’s up with that single cab ?👀
I recommend a pin wheel so you can roll those pipes will make welding alot easier 👍🏻
"Becky Dimes" let's go
HELL YEAH BABY!!
HOT DAMN! Love it!
This build is sick. I love to see you build a classic american muscle
cant forget to weld the bung hole.....
13:44
@@davidrangeljr_ ya i know... it was a joke... a meme...
good job team 👍
quin and ricky are such buddies i swear 😂
If only I knew how to do what you guys do. Yall keep it up
“He loves the length “ 😂
sounds soo good!! good job guys!!!😊
Why on earth would you swap a twin turbo v6 for a 4banger? I get that its unique, but with how heavy that car is, its going to feel slow as hell outside of boost.
Car sounds soooo crispy without being fully tuned
That thing is beautiful 💯🔥
I think zipties were good enough as hangers for the exhaust. lmaoooo
🔥 from the Philippines
Hey, that kid, Braiden, can TIG dimes... Cool build video!
You guys on fire 🔥 💜💙
Man I would love for you get to do this to my 1993 300zx
Love this style of video. Long vids ftw🙏🙏
awesome work
Quinn, engine M.D.
Sounds 👍
Irish Spring LIVES !
Make this the next giveaway car 🙏🏼
I've wondered why you go full haltech on the ecu and the O2 sensor but aren't using a DBW throttle body?
I spy with my little eye, something beginning with a 993 😍
Hopefully that blowby calms down with more running time.
Where did you get the ganador mirrors for this awesome build?!
You could look it up in their onlineshop. Maybe they haven them. 👍
Have*
You can do my car you can put your logo and info on it as big as you want like a billboard. I don't want anything crazy just a jdm H23 and it painted purple with green accents and 18" wheels
Nothing better than laying some serious pipe. Bam
More like “Lincoln the description.”
@throtl would you consider working on isf on the channel? I wonder what you would do with it?
👍 finally, just want to see it drive now haha
You guys should do T51R mod !
ive never heard a engine that isnt a diesel clattering like that. that would drive me nuts lol
Well done 👍🏾 now let's get more videos at least weekly 🥵
Why are u guys not purging exaust during welding? Would not welds be better?
Love the vids waiting for my chance to get a dream car 🙏🏾🙏🏾😂😂