All that is in that check valve is a light spring and rubber puck. The cap should almost be easy enough to unscrew by hand. Try cleaning it out and possibly change the rubber puck. You can sometimes re-stretch the spring, if it needs it.
Hello Friend, It is a good idea to try and repair the parts if you can. Thanks for the tip on repairing the check valve. I hope you were able to fix your compressor!
I would check the cut in and cut out setting. If that is not adjusted correctly it will trip the breaker. Thanks for watching and I hope it helped you. Have a great day!
Hello Friend, If you look on the video at about 4:49 I talk about the pressure control switch. If you have the cut out set incorrectly, the compressor will shut off due to excessive pressure. I adjusted it slowly to get the correct setting and it helped my compressor consistently run. Read the directions on the box cover to properly adjust the switch. I hope the rest of the video helps you figure out what is happening with your compressor!
@@jerseyjer8542 thanks for the reply, the compressor was working all fine, just one day I drained all the air and the next morning it started cutting out the fuse when I switch it on.
![ตีสิบเดย์ [FULL] | ครอบครัวสะท้านทุ่ง "นางบี & อ้ายสติ๊ก"](http://i.ytimg.com/vi/A1rhYcxxNtA/mqdefault.jpg)
Thanks for your time. God bless yall real good.
Hello Friend, I hope you were able to fix your compressor. Have a great day!
All that is in that check valve is a light spring and rubber puck. The cap should almost be easy enough to unscrew by hand. Try cleaning it out and possibly change the rubber puck. You can sometimes re-stretch the spring, if it needs it.
Hello Friend, It is a good idea to try and repair the parts if you can. Thanks for the tip on repairing the check valve. I hope you were able to fix your compressor!
@@jerseyjer8542do you know the part number for oring on check valve cap?
My compressor is generating very hot air making the relief valve got heat up… how to diagnose this problem
Hello everyone. I have added the links to the items that were mentioned in this video. Have a great day
a.co/d/7GAz1Tj
a.co/d/dUWU7PL
Great vid,i changed that valve it seems better but still sometimes its blowing the fuse ,any ideas fellows ?
I would check the cut in and cut out setting. If that is not adjusted correctly it will trip the breaker. Thanks for watching and I hope it helped you. Have a great day!
Where did you get the parts to replace the old ones no links...
I was able to find it on Amazon. I have posted the links. Have a great day!
My compressor starts then stops and cuts the fuse, what can it be? Checked the capacitors all working fine.
Hello Friend, If you look on the video at about 4:49 I talk about the pressure control switch. If you have the cut out set incorrectly, the compressor will shut off due to excessive pressure. I adjusted it slowly to get the correct setting and it helped my compressor consistently run. Read the directions on the box cover to properly adjust the switch. I hope the rest of the video helps you figure out what is happening with your compressor!
@@jerseyjer8542 thanks for the reply, the compressor was working all fine, just one day I drained all the air and the next morning it started cutting out the fuse when I switch it on.
@@jerseyjer8542 I have a same problem the switch is adjusted and the compressor stacks at 5 bar
Looks like relief valve is cross-threaded in tank.
Hello Friend. The relief valve is threaded properly. Thanks for the video view. Have a great day!
That’s a unloaded valve???
Where did you find it ????????????
I was able to find it on Amazon. I have posted the links. Have a great day!
@@jerseyjer8542 what link to it ?
That's a check valve isn't it?