Dodge Durango Mysterious Coolant Leak 😳 Heater Hose Replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 19 ก.ย. 2023
  • 2013 Dodge Durango Heater Hoses Leaking Coolant. Location And Removal. Mysterious Coolant Leak 😱🤔
    🔴 mannysilva_?igs...
    🔴 mannysautoservi...
    🔴 mannysautose...
    🔴 ‼️⚠️Houston Mobile Mechanic ‼️ ⚠️Same day service ⚠️‼️ #mobilemechanic #mechanicnearme #houstonmechanic #mecanicoadomicilio #houstonmobilemechanic #northsidehouston #mechanic #houston #mobilemechanicnearme #mobilemechanichouston #mobileautorepair #mannysautoservicellc #letsmobiletheworld
  • ยานยนต์และพาหนะ

ความคิดเห็น • 28

  • @MultiPartizan1
    @MultiPartizan1 6 หลายเดือนก่อน +3

    2018 dodge durango 53k miles same hose broke $250 heater hose assembly,$1100 dealer labor,
    I was able to make two part heater hose 1/2 inch one end 5/8 inch other side total cost $8 ,
    I was able to replace it without taking anything apart location is against the firewall hard to reach but duable,
    Make sure to open bleeder hole on water pump 5/16 when adding coolant .
    Good luck and Good Bless 🇺🇸

    • @grgortiz1401
      @grgortiz1401 3 หลายเดือนก่อน

      Do you have a video of this

  • @lesleytreece6584
    @lesleytreece6584 4 หลายเดือนก่อน +1

    Thanks for sharing this video

    • @mannydad
      @mannydad  3 หลายเดือนก่อน +1

      My pleasure

  • @alexandrasworld3460
    @alexandrasworld3460 4 หลายเดือนก่อน +1

    Hi! I’m in Houston are you mobile?

  • @jonathancastaneda6613
    @jonathancastaneda6613 6 หลายเดือนก่อน +1

    So you have the video of the removal of the wipers and other stuff to gain access

    • @mannydad
      @mannydad  5 หลายเดือนก่อน

      I don’t , but if I get another job like this. I will record.

    • @MultiPartizan1
      @MultiPartizan1 4 หลายเดือนก่อน +1

      I didn't remove anything heater hose is hard to get but is reachable.

    • @mannydad
      @mannydad  4 หลายเดือนก่อน

      @@MultiPartizan1 I’m sure you could reach without removing the wipers and the motors but it’s way easier and it doesn’t even take that long to take it off

  • @hollandtre
    @hollandtre 8 หลายเดือนก่อน +1

    I see you're in houston i habe the same problem with my durango

    • @mannydad
      @mannydad  8 หลายเดือนก่อน

      Hey there. Contact us on Facebook or Instagram if you still need help 🤝🏼 LINK IN DESCRIPTION

    • @MultiPartizan1
      @MultiPartizan1 6 หลายเดือนก่อน

      2018 dodge durango 53k miles same hose broke $250 heater hose assembly,$1100 dealer labor,
      I was able to make two part heater hose 1/2 inch one end 5/8 inch other side total cost $8 ,
      I was able to replace it without taking anything apart location is against the firewall hard to reach but duable,
      Make sure to open bleeder hole on water pump 5/16 when adding coolant .
      Good luck and Good Bless 🇺🇸

  • @grgortiz1401
    @grgortiz1401 3 หลายเดือนก่อน +1

    Was it leak under the transmission? My dodge is a 2021 with less than 19,000 miles and it's leaking a lot. Do you have another video of where the leak was.

    • @mannydad
      @mannydad  3 หลายเดือนก่อน

      It was about kinda. And I didn’t make a video. But if I get another job like that. I’ll make video.

  • @julito_Mayaguez
    @julito_Mayaguez 8 หลายเดือนก่อน +2

    Deam i have to do the same 😢 how dificult it is bro!! Its any way i can delete the heater ? I dont need it cz i live in puerto rico

    • @mannydad
      @mannydad  8 หลายเดือนก่อน +1

      I’m sure you can. You can by pass by removing the hoses that go to the heater. Connect both of the inlet and outlet with a big hose together. They on each side on the engine.

    • @MultiPartizan1
      @MultiPartizan1 6 หลายเดือนก่อน +1

      2018 dodge durango 53k miles same hose broke $250 heater hose assembly,$1100 dealer labor,
      I was able to make two part heater hose 1/2 inch one end 5/8 inch other side total cost $8 ,
      I was able to replace it without taking anything apart location is against the firewall hard to reach but duable,
      Make sure to open bleeder hole on water pump 5/16 when adding coolant .
      Good luck and Good Bless 🇺🇸

    • @dorse72
      @dorse72 3 หลายเดือนก่อน

      @@MultiPartizan1 we cannot get our hands in there are get to clamps to get hose out, considering getting a special long pair of clamp pliers or calbe release clamps, any ideas?? frustrating as hell, dont want to remove all that, just have a slit in the small heater hose extension it looks like. wish u were in dallas Manny!

  • @bullgodceo7915
    @bullgodceo7915 9 หลายเดือนก่อน +1

    How did you find the leak before removing all that

    • @mannydad
      @mannydad  9 หลายเดือนก่อน

      Pressure test. And look around the hoses and wait for something to leak

    • @mannydad
      @mannydad  9 หลายเดือนก่อน

      Pressure test. And look around the hoses and wait for something to leak

    • @MultiPartizan1
      @MultiPartizan1 6 หลายเดือนก่อน

      2018 dodge durango 53k miles same hose broke $250 heater hose assembly,$1100 dealer labor,
      I was able to make two part heater hose 1/2 inch one end 5/8 inch other side total cost $8 ,
      I was able to replace it without taking anything apart location is against the firewall hard to reach but duable,
      Make sure to open bleeder hole on water pump 5/16 when adding coolant .
      Good luck and Good Bless 🇺🇸

  • @TacticalDrilla
    @TacticalDrilla 4 หลายเดือนก่อน +1

    What is part number????

    • @mannydad
      @mannydad  3 หลายเดือนก่อน

      1:38

  • @daverichards190
    @daverichards190 10 หลายเดือนก่อน +2

    LOL mopar and their fantastic plastic

    • @mannydad
      @mannydad  10 หลายเดือนก่อน +1

      I know 🤦‍♂️

    • @MultiPartizan1
      @MultiPartizan1 6 หลายเดือนก่อน

      2018 dodge durango 53k miles same hose broke $250 heater hose assembly,$1100 dealer labor,
      I was able to make two part heater hose 1/2 inch one end 5/8 inch other side total cost $8 ,
      I was able to replace it without taking anything apart location is against the firewall hard to reach but duable,
      Make sure to open bleeder hole on water pump 5/16 when adding coolant .
      Good luck and Good Bless 🇺🇸

  • @donoimdono2702
    @donoimdono2702 2 หลายเดือนก่อน

    poor design. that square plastic separation part is unneeded. just replace that big broken plastic square with a single hose run from point A to point B w/o the divider where the break occurred.
    at time 1:10 that metal "Y" shaped pipe - on my truck, that part is plastic and cracked. I replaced it 10 yrs. ago with a metal "Y" and had no issues since.