I am so glad I came across your page, I'm a big DIYer and have learn a lot more than I thought I knew about various techniques for building out, water proofing, tiling etc, thank you so much for all the work you and your wife are doing and please keep the videos coming!
As a DIYer doing a 2 wall basement shower for the first time, I used Kerdi board (Schluter) and found it really simple and only a bit more in price that the Red Guard/cement board. Factor in mess, drying times, fumes, etc and I can't see why you wouldn't do with Schluter. The boards are light, can cut with a knife, they are waterproof (of course you have to cover seams and screw penetrations). When I demo the upstairs shower I'm going to use Kerdi board again and this video (which was great by the way) just clarified that decision for me.
This is a GREAT video! I wish I'd found this a month ago, before I started ripping walls out. Still hanging cement board (which I'd have done slightly differently had I found your video sooner), but this is great info for when I get to the Redgard stage. In our master bathroom. Ugh, lol. Luckily I used Hardie's upgraded waterproof board for the entire long wall, so only need Regard on the two short walls (and over the screws on the Hardie waterproof board). Anyway, this deserves a lot more views and likes -- you have one of the best tub surround videos out there, and I have watched plenty. Thanks for this!
I rolled three coats of Regard in a bathroom job about 7 years ago. No problems so far, works great. But it can kill some brain cells. Were a respirator.
Thanks, from London. This is hpw I would do it but you have so many people with slightly different ways. I believe this will last my lifetime as I'm 67. The extra spend is completely worth it.
I'm also not a fan of RedGaurd - I prefer to use Hydro-Ban - Much easier - less time consuming process (application and drying time) and almost odorless - Plus I believe its a better waterproofing liquid membrane. I actually prefer to use waterproof Foam board and just seal the joints and screw/plates with Waterproof sealant, and not have to cover the whole wall with a waterproof membrane. I use a 12" wide waterproofing of Hydro Ban on the transition from Wallboard to drywall areas. Thank you for your excellent and very informative and honest opinions videos!
I see a lot of hack tilers on youtube. When someone starts quoting TCNA, NTCA, ANSI standards and recommends following manufactures recommendations, they have my attention.
Doesnt the cement board need to be 3/4" above the tub deck? Wont there be weeping issues when water eventually penetrates the tile and grout from the deck?
Nice. My shower started falling down after 12 years. Taking it apart. Mistakes found: mold due to no waterproofing, used regular sheetrock on the shower, no blocking and no framing on one wall (still trying to figure this part out)
I know i'm late to the party. But excellent video. Been watching your channel alot. I'm working on my MB remodel and your channel has been a Great Tool. Thank's.
Wild, you can do that and if the tile and grout are sealed it might last upwards of 10 years of nothing ever gets cracked, I just pulled apart a tub surround that was glued onto regular drywall with no problems (no shower in tub)
40 years ago there was no cement board or water proofing. My old house has tile directly on drywall. Its fine. Everything is overkill today because of lawyers and liability.
@@Gibran1517Yes as I kid I helped my uncle retile our shower 30 years ago in '95, w green board and paint primer. It's been bulletproof w so many rental families daily use. The new water proofing products are available for those with money, or for diy folks to reduce margins of error, and also make sure an expensive custom shower will last a very long time.
You need to prime a cement board with a diluted mix of redguard + water. Text from the redguard instructions. Prime all surfaces to receive RedGard® with properly applied manufacturer's sealer or with a primer coat of RedGard®, consisting of 1 part RedGard®, diluted with 4 parts clean, cool water. In a clean pail, mix at low speed to obtain a lump-free solution.
wouldnt it dry faster and maybe finish faster if you did more thinner coats to get the same coverage? they claim it drys in 90 min if u roll it i imagine.
I barely made it through the whole video, the reason it's still wet the next day is because you're putting it on too thick. I understand the jug says what it says, but putting it on in thin Coats 5 Coats with a roller in one day, the 2nd day after the 1st day you hang all the concrete board tape and see all the joints with alkali resistant concrete board, seam tape and thin set like you mentioned. Let it dry and then put 5 Coats on the next day with a fan with a respirator. And I'm using exactly the same amount you are. it should end up being credit card thickness so you're doing it in 2 days and I'm doing it in 2 days, but I'm doing it with a roller, so it's the same, im just using ardex s1k..... Also different municipalities call for different distances on concrete board screws. Where I am it's six inches on edge , Is and eight in the field...... Good video man!
Guess only difference is 2nd day I’m done in 45 minutes verses messing around every hour to apply more. If I had other things to do, I agree rolling is easier. But this is the last time for me anyways 😆
hey bud qs how come it says the max pro is recommended for window exterior and siding, not recommended for bathroom? can I still use it for sealing my bathroom cement board
I don't like when you install the bathtub first and then you tile the floor up to the tub.Then the tub is below the tile. When I do my bathroom I want to tile the floor first and the tub will sit on the tile floor. Is that the wrong way to do it. Back in the day I used to see the tube sitting on top of the tile
I agree about the smell. It's awful. I have never used Redgard as my primary waterproofing method. I use it as extra protection in corners, around windows, anywhere i think might need just that extra bit of insurance - especially with Schluter since i don't trust their method of using thinset after watching some of Tile Coach's stuff. I trust the poly sealants much more. I may never buy anymore of it since i can get Hydroban locally now.
You have to prime the cement board with 1 part Redgard, 4 parts water first. The cement board is also not supposed to rest on the tub lip. Make sure you read manufacturer's instructions before doing this.
Great vid by BRT. Finally to see someone do it this way. I have done my first bathroom loooong time ago the same way and relied on common sense. Now watching you do this Steve I got the idea and wonder what if we redguard cement boards prior to installing them onto walls? 👀 Would be much easier handling the trowel on a flat (sawhorse plywood table) or even on the floor and definitely way less messier. Then it would left only to embed the tape over the seams and corners. Hmmmmh And for the smell, if I remember correctly it was strong ammonia based odor that after two hours working in confined space definitely gets to you. Never used hydroban. Does that smell strong as well?
@@BathroomRemodelingTeacher Hahaha, of course. Foam board is superior in so many ways. Great work. Saw a finished Barbie & Ken bathroom on insta. Looks dope. 👍💪
I’m currently doing a full house remodel that includes two bathrooms where I’m building custom showers. I’m definitely using cement board and a liquid membrane. You mentioned a couple other products and I know there is also mapai aqua defense. Of all those products, which is the best and/or easiest to work with?
As a virgin bathroom re-modeller, and trying to balance budget vs idiot-proof, I'm reluctant to try using Schluter simply because I expect to screw up. RedGuard seems easy enough for us newb's but is Ardex or HydroBan just as forgiving? Budget wise, you made a great point about being budget comparable.
@bathroom remodeling teacher - would you prefer Liquid Hydroban or Cementitious Hydroban to waterproof mud pack shower pans?? Really like your work just can’t decide whether bond strength of liquid waterproofers is sufficient….
Do you have to plan using furring strips when you set the toilet flang? I assume this could be a problem if you are doing a remodel where the flange is already installed?
Is it necessary to use the mesh tape with the goboard sealant because you're using durock? Goboard install only needs to just use the goboard sealant with no mesh tape.
Love your trowel method and it’s friendlier to drywallers like myself. Would you know if this method can also be applied to other liquid membrane products like Hydroban or AquaDefense? And how do you clean your tools so you can transition to drywall? Just let the redguard dry and peel off?
I feel aquadefense is pretty much the same consistency as Redgard. So wouldn’t be a bad idea to do it with that. Hydroban goes on thick. So normally not needed. But is helpful troweling the seams and corners
Good question, I usually do I simply didn’t order or grab it this time. Half the wall will be tile anyways 😆 I feel like that stuff is just a gimic anyways
Nothing wrong with this contractor's method of building a bath shower, which will likely outlast the homeowners lol. However, imho -- it's overkill, time consuming and expensive. 30 years ago I was 13, and helped my uncle re-tile the walls of our bath (which has a 60's cast iron tub still in near perfect shape. We used green sheetrock, and liquid nails tub surround sealant + mesh tape over the seams & corners; and then rolled 3 coats of Zinsser paint primer (1 gallon) before tiling. Fast forward over 3 decades, after multiple rental families and daily use -- it's been bullet proof. Not a single issue, and easily ready for another 2 decades.
Well I'm trying to pickup on what is being done and for me a closer view then 6 ft. away on video does not fill my need to see what is taking place. I might as well be listening to a radio. I would think DYIers, are just like me and need visual reference along with the spoken tips. This is not the only simi = instruction video that could really help the folks who need it. IMO
You don't have to install cement board to build a waterproof shower, you can use moisture proof drywall and apply 2 coats of Hydroban or AquaDefense (avoid this crappy RedGard or Ardex 8+9) You're done and ready to tile!
Agree. 30 years ago I was 13, and helped my uncle re-tile the walls of our bath (which has a 60's cast iron tub still in near perfect shape). We used green sheetrock, and liquid nails tub surround sealant + mesh tape over the seams & corners; and then rolled on 3 coats of Zinsser paint primer (1 gallon) giving extra attention to the first 4 feet, before tiling. 3 decades later, after daily use by mulriple rental families -- it's been bullet proof. Not a single issue, and I feel it's easily good for another 2 decades.
I'm curious to know if people still use the bathtub? We had bathtubs in the past; however, nobody would ever use them. There's something about sitting in water that others have showered, unless you going to clean it every time you use it. Many people are obviously too large to sit in a bathtub.
@@jaythefit8817 That's funny, that's about my husband's size and when we were remodeling our bathroom, we didn't have the shower hooked up yet so he was forced to take a bath for the first time since he was a child and he struggled so hard! I have an oversized Jacuzzi bathtub and he still struggled 🤣 but to the comment about the cleanliness, once or twice a week, I fill the bathtub with extremely hot water and about a cup of bleach and I run the jacuzzi for a few minutes and then rinse it out and my bathtub is always sparkling ( I scrub it as well but that is how I clean the jacuzzi part)
@@MsP2793 Do you know how ridiculous we big men feel when in a small tub? It's almost embarrassing to even mention being in a tub. My bride doesn't use the tub because, like many women, is a germaphobe. Can't wear shoes in the house and we can't do anything without her hawkish eye making sure everyone washes their hands. I love her dearly and she is wonderful mother; however, guess who becomes ill far more between the two of us? Yep, my dirty hands and drinking from the creeks and rivers has made me bulletproof. 😂
@@jaythefit8817 I hate to say it but it sounds like me and your wife have a lot in common 🤣 I'm literally the type of person to vacuum their vacuum! And yes I got a very good laugh out of watching my husband struggle in that bathtub, he literally took a shower outside and made me hold the hose as a shower head for him until we finished our bathroom. He'd rather deal with the ice cold water coming from the hose then put himself back into that bathtub!
i have used only cement board outdoors with tiles going on 16 years for my outdoor sink/ shower/ outdoor bar i have no problems whatsoever , i dont know if red gaurd was even invented then…. just saying
To get the best cuts you've set up. Saw horses outside with a fan and check the wind and make sure the dust goes down wind. Or you can put a little bit of water on the board and it'll keep the dust down but cutting. With a grinder outside is still best for cutting concrete board. gives you the best edge most accurate.
Yes I have used green board and paint primer 3 coats. 30 years ago as a kid helping my uncle retile our bath. It's held up perfectly over many rental families and easily ready for 2 more decades.
Nothing worse than working with stinky chemicals in an enclosed space. Snug-fitting, dual cannister chemical-grade respirator definitely needed, maybe eye protection too.
23:34 "Hurts to breath, how are you doing that", I don't understand...(i.e. breathing the fumes) 24:16 "I find this stuff to be unbelievably smelly" (i.e. strong chemical smell)
Lots of $$ on extra Red guard...... perhaps for an upstairs bathroom. No contractor is going to go that far either...... unless they include a 10 year warranty 😆😆
1. Thank You for NOT recommending green board. 2. GoBoard or similar is superior. Already waterproof and available in 3x5 AND 4x8. Faster, easier and no dusty concrete boards and time-consuming waterproofing.
People going crazy with the waterproofing. Why do people stop at the ceiling. Waterproof that sucker to. lol I have removed showers 20 plus years old still fine that were ceramic tile on green board essentially. I wouldn't recommend that but there's a lot more to a lasting shower than any single operation.
Why not use the same method with paint. I mean why do 3 layers when you can just do what you do?😂 Oh wait, there is a reason you do multiple thin coats?
4 gallons, you've got to be kidding me. I've done multiple showers with it and you roll it two times, if that. That toweling looked so painful and messy and terrible, and of course, it took forever to dry doing it that way. I think the manufacturers are laughing at you using 4 gallons, that stuffs expensive. There's many tests with it rolled on, one guy even lined a cardboard box with it and it held water for months no leaks.
It bothers me when i see videos about a product thats just as good if not better than some others on the market. He obviously just don't like redguard. Thats ok, but don't talk mess about the product. I have used Redguard, Hydro and Aqua Defense as well ass others and they all works well to achieve the same goal. Never had a call back nor have I ever seen one of these products fail during a demo due to the product...only how it was applied. So please stop. Redguard is a good waterproofing just like the others.
I am so glad I came across your page, I'm a big DIYer and have learn a lot more than I thought I knew about various techniques for building out, water proofing, tiling etc, thank you so much for all the work you and your wife are doing and please keep the videos coming!
As a DIYer doing a 2 wall basement shower for the first time, I used Kerdi board (Schluter) and found it really simple and only a bit more in price that the Red Guard/cement board. Factor in mess, drying times, fumes, etc and I can't see why you wouldn't do with Schluter. The boards are light, can cut with a knife, they are waterproof (of course you have to cover seams and screw penetrations). When I demo the upstairs shower I'm going to use Kerdi board again and this video (which was great by the way) just clarified that decision for me.
😊 exactly 👍 way easier ways to go these days. The fumes are insane with Redgard 😆 thx
@@BathroomRemodelingTeacherwhy didn’t you wear a respirator?
This is a GREAT video! I wish I'd found this a month ago, before I started ripping walls out. Still hanging cement board (which I'd have done slightly differently had I found your video sooner), but this is great info for when I get to the Redgard stage. In our master bathroom. Ugh, lol. Luckily I used Hardie's upgraded waterproof board for the entire long wall, so only need Regard on the two short walls (and over the screws on the Hardie waterproof board). Anyway, this deserves a lot more views and likes -- you have one of the best tub surround videos out there, and I have watched plenty. Thanks for this!
DIYer here. Redgard is an amazing product. I use it all the time. Turn on the vent and stick a fan in the room.
I rolled three coats of Regard in a bathroom job about 7 years ago.
No problems so far, works great. But it can kill some brain cells. Were a respirator.
wear not were
Where braincells not wear braincells
@@bmcd4448this is construction not a English tutorial😂
Thanks, from London. This is hpw I would do it but you have so many people with slightly different ways. I believe this will last my lifetime as I'm 67.
The extra spend is completely worth it.
I'm also not a fan of RedGaurd - I prefer to use Hydro-Ban - Much easier - less time consuming process (application and drying time) and almost odorless - Plus I believe its a better waterproofing liquid membrane. I actually prefer to use waterproof Foam board and just seal the joints and screw/plates with Waterproof sealant, and not have to cover the whole wall with a waterproof membrane. I use a 12" wide waterproofing of Hydro Ban on the transition from Wallboard to drywall areas. Thank you for your excellent and very informative and honest opinions videos!
You're correct, Hydroban and AquaDefense are the best for waterproofing! Ardex8+9 and RedGard are pure junk products!
I see a lot of hack tilers on youtube. When someone starts quoting TCNA, NTCA, ANSI standards and recommends following manufactures recommendations, they have my attention.
Doesnt the cement board need to be 3/4" above the tub deck? Wont there be weeping issues when water eventually penetrates the tile and grout from the deck?
Nice. My shower started falling down after 12 years. Taking it apart. Mistakes found: mold due to no waterproofing, used regular sheetrock on the shower, no blocking and no framing on one wall (still trying to figure this part out)
I know i'm late to the party. But excellent video. Been watching your channel alot. I'm working on my MB remodel and your channel has been a Great Tool. Thank's.
Thanks for the clip. I saw some contractors who strongly suggested putting thin-set on cement board directly without the waterproof membrane.
Wild, you can do that and if the tile and grout are sealed it might last upwards of 10 years of nothing ever gets cracked, I just pulled apart a tub surround that was glued onto regular drywall with no problems (no shower in tub)
40 years ago there was no cement board or water proofing. My old house has tile directly on drywall. Its fine. Everything is overkill today because of lawyers and liability.
@@Gibran1517Yes as I kid I helped my uncle retile our shower 30 years ago in '95, w green board and paint primer. It's been bulletproof w so many rental families daily use. The new water proofing products are available for those with money, or for diy folks to reduce margins of error, and also make sure an expensive custom shower will last a very long time.
You spilled at least a gallon of red guard in the tub lol. Glad I found this for a good reference before I used this product. Thanks.
very helpfull! I'm enjoying your videos a lot these days
You need to prime a cement board with a diluted mix of redguard + water.
Text from the redguard instructions.
Prime all surfaces to receive RedGard® with properly applied manufacturer's sealer or with a primer coat of RedGard®, consisting of 1 part RedGard®, diluted with 4 parts clean, cool water. In a clean pail, mix at low speed to obtain a lump-free solution.
I’m never using Red Guard, after knowing other opinions like, Go Board, Hidro Ban, Kerdi.
Appreciate your time to show us how difficult this method.
wouldnt it dry faster and maybe finish faster if you did more thinner coats to get the same coverage? they claim it drys in 90 min if u roll it i imagine.
I barely made it through the whole video, the reason it's still wet the next day is because you're putting it on too thick. I understand the jug says what it says, but putting it on in thin Coats 5 Coats with a roller in one day, the 2nd day after the 1st day you hang all the concrete board tape and see all the joints with alkali resistant concrete board, seam tape and thin set like you mentioned. Let it dry and then put 5 Coats on the next day with a fan with a respirator. And I'm using exactly the same amount you are. it should end up being credit card thickness so you're doing it in 2 days and I'm doing it in 2 days, but I'm doing it with a roller, so it's the same, im just using ardex s1k..... Also different municipalities call for different distances on concrete board screws. Where I am it's six inches on edge , Is and eight in the field...... Good video man!
Guess only difference is 2nd day I’m done in 45 minutes verses messing around every hour to apply more. If I had other things to do, I agree rolling is easier. But this is the last time for me anyways 😆
@@BathroomRemodelingTeacher okok
Its going to crack so thick 😂😂😂😂
@@KristopherWhite-t8r no no, never, Only cracks when you put it on thick. Like he's doing in this video. But, Hey, you have a good one.
I prime the walls first dilute redgard with water to prime
hey bud qs how come it says the max pro is recommended for window exterior and siding, not recommended for bathroom? can I still use it for sealing my bathroom cement board
I appreciate all your excellent videos and information very much - Thank you!
Do I need red guard if I use the red cement board that is supposed to be water proof
Is it important to use the seem tape for the wall to ceiling corner/transition?
I don't like when you install the bathtub first and then you tile the floor up to the tub.Then the tub is below the tile. When I do my bathroom I want to tile the floor first and the tub will sit on the tile floor. Is that the wrong way to do it. Back in the day I used to see the tube sitting on top of the tile
I agree about the smell. It's awful. I have never used Redgard as my primary waterproofing method. I use it as extra protection in corners, around windows, anywhere i think might need just that extra bit of insurance - especially with Schluter since i don't trust their method of using thinset after watching some of Tile Coach's stuff. I trust the poly sealants much more. I may never buy anymore of it since i can get Hydroban locally now.
You have to prime the cement board with 1 part Redgard, 4 parts water first. The cement board is also not supposed to rest on the tub lip. Make sure you read manufacturer's instructions before doing this.
Great vid by BRT. Finally to see someone do it this way. I have done my first bathroom loooong time ago the same way and relied on common sense. Now watching you do this Steve I got the idea and wonder what if we redguard cement boards prior to installing them onto walls? 👀 Would be much easier handling the trowel on a flat (sawhorse plywood table) or even on the floor and definitely way less messier. Then it would left only to embed the tape over the seams and corners. Hmmmmh And for the smell, if I remember correctly it was strong ammonia based odor that after two hours working in confined space definitely gets to you. Never used hydroban. Does that smell strong as well?
That’s not a bad idea at all. Less work than in the field. I’d still go with a foam board any day 😆
@@BathroomRemodelingTeacher Hahaha, of course. Foam board is superior in so many ways. Great work. Saw a finished Barbie & Ken bathroom on insta. Looks dope. 👍💪
I wish yall showed some of the prep and measurement of how he found all the holes!
You made lifting that Sheetrock into place look easy, damn 😳💪
Is there going to be a door on this bathroom?? 🚽👀
good editing, great info, thanks.
I’m currently doing a full house remodel that includes two bathrooms where I’m building custom showers. I’m definitely using cement board and a liquid membrane. You mentioned a couple other products and I know there is also mapai aqua defense. Of all those products, which is the best and/or easiest to work with?
Easiest is hydroban. Best I’d say is Ardex 8+9. It’s like a rhino liner.
As a virgin bathroom re-modeller, and trying to balance budget vs idiot-proof, I'm reluctant to try using Schluter simply because I expect to screw up. RedGuard seems easy enough for us newb's but is Ardex or HydroBan just as forgiving? Budget wise, you made a great point about being budget comparable.
excellent video and tips! thanks a lot
That caulking gun is awesome
@bathroom remodeling teacher - would you prefer Liquid Hydroban or Cementitious Hydroban to waterproof mud pack shower pans??
Really like your work just can’t decide whether bond strength of liquid waterproofers is sufficient….
You guys never show the exact caulking you use... Thanks for showing it finally
Why not turn on the exhaust fan? For the smell
What kind of sealant goes between the cement boards?
Do you have to plan using furring strips when you set the toilet flang? I assume this could be a problem if you are doing a remodel where the flange is already installed?
Why not use Densshield from Georgia Pacific instead of ciment board? You'd just have to seal the joints.
Is it necessary to use the mesh tape with the goboard sealant because you're using durock? Goboard install only needs to just use the goboard sealant with no mesh tape.
Go go board, no. Simply use sealant 👍
Love your trowel method and it’s friendlier to drywallers like myself. Would you know if this method can also be applied to other liquid membrane products like Hydroban or AquaDefense? And how do you clean your tools so you can transition to drywall? Just let the redguard dry and peel off?
I feel aquadefense is pretty much the same consistency as Redgard. So wouldn’t be a bad idea to do it with that. Hydroban goes on thick. So normally not needed. But is helpful troweling the seams and corners
As far as excess. I use plasterweld primer before mudding over 👍
How come you didn't use "green/purple board" drywall in bathroom? I am asking before i finish the video so you may have answered.
Good question, I usually do
I simply didn’t order or grab it this time. Half the wall will be tile anyways 😆 I feel like that stuff is just a gimic anyways
What do you use for the staples with that furring strips? 1/4” crown 1-1/4” stainless steel staples or something else ?
Thank you for all your knowledge!
Can i just use a thin set and mesh tape for corners and screws on the cement board and be done with it ?
Nothing wrong with this contractor's method of building a bath shower, which will likely outlast the homeowners lol. However, imho -- it's overkill, time consuming and expensive. 30 years ago I was 13, and helped my uncle re-tile the walls of our bath (which has a 60's cast iron tub still in near perfect shape. We used green sheetrock, and liquid nails tub surround sealant + mesh tape over the seams & corners; and then rolled 3 coats of Zinsser paint primer (1 gallon) before tiling. Fast forward over 3 decades, after multiple rental families and daily use -- it's been bullet proof. Not a single issue, and easily ready for another 2 decades.
Well I'm trying to pickup on what is being done and for me a closer view then 6 ft. away on video does not fill my need to see what is taking place. I might as well be listening to a radio. I would think DYIers, are just like me and need visual reference along with the spoken tips. This is not the only simi = instruction video that could really help the folks who need it.
IMO
What are you using for those joints?
OSI Quad exterior urethane
You don't have to install cement board to build a waterproof shower, you can use moisture proof drywall and apply 2 coats of Hydroban or AquaDefense (avoid this crappy RedGard or Ardex 8+9)
You're done and ready to tile!
Agree. 30 years ago I was 13, and helped my uncle re-tile the walls of our bath (which has a 60's cast iron tub still in near perfect shape). We used green sheetrock, and liquid nails tub surround sealant + mesh tape over the seams & corners; and then rolled on 3 coats of Zinsser paint primer (1 gallon) giving extra attention to the first 4 feet, before tiling. 3 decades later, after daily use by mulriple rental families -- it's been bullet proof. Not a single issue, and I feel it's easily good for another 2 decades.
Great info! Thank you!
I'm curious to know if people still use the bathtub? We had bathtubs in the past; however, nobody would ever use them. There's something about sitting in water that others have showered, unless you going to clean it every time you use it. Many people are obviously too large to sit in a bathtub.
I just wash my body and rinse off with the shower after a bath, but I also keep my bathroom extremely clean
@@MsP2793 You probably fit well in a bathtub; however, I'm 6'4" tall and weigh in the neighborhood of about 270#, and that not fat by the way. 😂
@@jaythefit8817 That's funny, that's about my husband's size and when we were remodeling our bathroom, we didn't have the shower hooked up yet so he was forced to take a bath for the first time since he was a child and he struggled so hard! I have an oversized Jacuzzi bathtub and he still struggled 🤣 but to the comment about the cleanliness, once or twice a week, I fill the bathtub with extremely hot water and about a cup of bleach and I run the jacuzzi for a few minutes and then rinse it out and my bathtub is always sparkling ( I scrub it as well but that is how I clean the jacuzzi part)
@@MsP2793 Do you know how ridiculous we big men feel when in a small tub? It's almost embarrassing to even mention being in a tub. My bride doesn't use the tub because, like many women, is a germaphobe. Can't wear shoes in the house and we can't do anything without her hawkish eye making sure everyone washes their hands. I love her dearly and she is wonderful mother; however, guess who becomes ill far more between the two of us? Yep, my dirty hands and drinking from the creeks and rivers has made me bulletproof. 😂
@@jaythefit8817 I hate to say it but it sounds like me and your wife have a lot in common 🤣 I'm literally the type of person to vacuum their vacuum! And yes I got a very good laugh out of watching my husband struggle in that bathtub, he literally took a shower outside and made me hold the hose as a shower head for him until we finished our bathroom. He'd rather deal with the ice cold water coming from the hose then put himself back into that bathtub!
If 1 gallon covers 55 sqft. Why you use 4.5 gallons?
Excellent video!
How thick is that cement board
i have used only cement board outdoors with tiles going on 16 years for my outdoor sink/ shower/ outdoor bar i have no problems whatsoever , i dont know if red gaurd was even
invented then…. just saying
What happens if someone doesn’t put the cement board all the way down?
Also, I noticed you got the redguard on the tub and floor laminate. How do you remove and clean it up?
What sealant did you use between the wallboards?
OSI Quad exterior urethane
Yikes - I’d be scared to score/cut the cement board on top of new flooring like that!
To get the best cuts you've set up. Saw horses outside with a fan and check the wind and make sure the dust goes down wind. Or you can put a little bit of water on the board and it'll keep the dust down but cutting. With a grinder outside is still best for cutting concrete board. gives you the best edge most accurate.
What’s the point of using cement board over sheet rock if you’re coating it all with Redgard? Tile is connected to the Redgard coating either way.
Yes I have used green board and paint primer 3 coats. 30 years ago as a kid helping my uncle retile our bath. It's held up perfectly over many rental families and easily ready for 2 more decades.
What is that bathroom fan??
Wheres the primer coat and didnt see him clean the substrate for maximum bonding ?
This product works great when applied properly.
Peeling that tape off is going to be tough!
Nothing worse than working with stinky chemicals in an enclosed space. Snug-fitting, dual cannister chemical-grade respirator definitely needed, maybe eye protection too.
23:34 "Hurts to breath, how are you doing that", I don't understand...(i.e. breathing the fumes) 24:16 "I find this stuff to be unbelievably smelly" (i.e. strong chemical smell)
Very good information
i guess when you get home you can just stand your pants up in the corner and just jump back into them the next day.
USE A SMALL ROLLER WITH RED GUARD
Lots of $$ on extra Red guard...... perhaps for an upstairs bathroom. No contractor is going to go that far either...... unless they include a 10 year warranty 😆😆
There's no need to flatten the ridges after using the 3/16trowel that's a step you can skip imo
why use a tile board that requires so much water proofing?
Why too think in layers, will crack and fail
1. Thank You for NOT recommending green board.
2. GoBoard or similar is superior. Already waterproof and available in 3x5 AND 4x8.
Faster, easier and no dusty concrete boards and time-consuming waterproofing.
You are a Master in your Art Sir!!
I brush red gard is better and leaves a nice texture
People going crazy with the waterproofing. Why do people stop at the ceiling. Waterproof that sucker to. lol I have removed showers 20 plus years old still fine that were ceramic tile on green board essentially. I wouldn't recommend that but there's a lot more to a lasting shower than any single operation.
With how much Redgard costs and how much he is wasting I will stick with a brush and roller.
He waterproofed the shit out of that shower
he should have used permabase foam. dont even need to redgard the whole board
just the seams and screw heads
maybe turn on the fan above your head
Excellent video, thank you for sharing your experience.
Run the exhaust fan at least. Phew
You are a beast
Bro building a tub surround in an attic sheesh
Why not use the same method with paint. I mean why do 3 layers when you can just do what you do?😂 Oh wait, there is a reason you do multiple thin coats?
This guy knows his trade, that shit is nasty
Is this bathroom you are doing inside a submarine? Talk about overkill !
i hope your sponserd by customs building products
Молодец очень хорошо
correction almost everything bonds to silicone thats what they use to adhere granite slabs. be careful what you teach bathroon teacher.
I’ll do 4 rollers and 4 days than deal with that trawl mess.
Think ima just do this lol
Barbie colors... again!
4 gallons, you've got to be kidding me. I've done multiple showers with it and you roll it two times, if that. That toweling looked so painful and messy and terrible, and of course, it took forever to dry doing it that way. I think the manufacturers are laughing at you using 4 gallons, that stuffs expensive. There's many tests with it rolled on, one guy even lined a cardboard box with it and it held water for months no leaks.
Do you need a mask for this?
It bothers me when i see videos about a product thats just as good if not better than some others on the market. He obviously just don't like redguard. Thats ok, but don't talk mess about the product. I have used Redguard, Hydro and Aqua Defense as well ass others and they all works well to achieve the same goal. Never had a call back nor have I ever seen one of these products fail during a demo due to the product...only how it was applied. So please stop. Redguard is a good waterproofing just like the others.
You picked up on the fact that I don’t like it 😂
I saw that u lose a LOT of Membrane in the tub because your Way of sticking that red guard on the walls,I think this way u need 3 buckets not 2 😂😂😂😂😂
🤦🏼♂️🤦🏼♂️🤦🏼♂️🤦🏼♂️🤦🏼♂️🤦🏼♂️🤦🏼♂️🤦🏼♂️🤦🏼♂️🤦🏼♂️
Wear an n95 or higher if you can! Save your lungs, lung cancer sucks
A air mover
what a waste of materials on rolling membrane.