It's good to see young truckers working on their own trucks. Saving money and learning about their trucks.. been trucking for 28 years. And if I can fix it why pay someone 125+ an hour to do it.
It worked for me man I am so happy. I did it myself, I did not bend my air hose I poke regular ball pen in the hose and tape it. It worked. Now will change rest of air bags. Thanks
You were right to tighten bolt at first then loosen nut a old timer taught me that trick also penatrating oil a few days before a job and last heat if needed anyway thanks for sharing your experience .
Thanks for the video. With a shifting spanner the handle should be pointing in the direction you are turning, this stops it jamming. Also cheap shifters will jam as well. This is not a negative for your video just some people don’t know this.
You should never bend your air lines like you just ruin the intergity of that line possible air leak later. All you had to do is make a plug with quick connect to seal line up cost you maybe 10 to 15 dollars to make.
Thx for the video jist to think that i would of pay some 1 for something this simple lol and all ready have all the tools that i need for this kind of job thx again
Thanks man for this video . I have a question about Freightliner Cascadia 2016 The truck it doesn't come with airbag dumb switch inside the cab When I need to empty the airbag I don't have switch key available If there is any way I can add airbag switch suspension ? thank you ...
Maher A All that you have to do is release the air hose from the airbag. Then clamp it so that it will not lose air. Once you clamp it it will build-up air everywhere else and raise the truck. Hopefully that helps
Thanks for the quick reply .. Appreciate for this information the think making me asking about to add the airbag suspension switch keys inside the cap because I do hook and drops trailers 3 to 4 times a week and you know if I have airbag switch key inside the cab will make it easier .. anyway I will check like you said Thank you ...
Why you riding his D we know it's not proper its calling working with what you have to get the job done.good video bro good to see that you are handy and not scared to get your hands dirty like a lot of people
Excellent video, thank you very much, I am interested to know what the front suspension is called, since I am developing a preventive maintenance plan for a tractor very similar to yours, I have already investigated and I know that the rear suspension is Freightliner - FAS II Airliner- Suspension pneumatic axle in tandem 46,000 lb, but I would be very interested and would appreciate if someone told me what the rear suspension is called
That was going to be hot 🥵 and balding (without blocking up the truck because consuming foods with Chloride and hydrogen magnetizing little hydrogen make a lot hotter.
Hey Martin, Instead of harping on him and his tools, just remember something he didn't pay 125.00 for someone else to do the work. Not to mention it's nice to see you get truck drivers know what to do on their trucks.. too many lazy truckers out there who don't do work to their trucks.
It's good to see young truckers working on their own trucks. Saving money and learning about their trucks.. been trucking for 28 years. And if I can fix it why pay someone 125+ an hour to do it.
I pay 125+ an hour for someone else to do it if I make 200 an hour :p
Not to mention they charge more time then it actually takes. They will easily charge almost two hours for that
It worked for me man I am so happy. I did it myself, I did not bend my air hose I poke regular ball pen in the hose and tape it. It worked. Now will change rest of air bags. Thanks
That's a good idea! I'm changing two out on my truck today and will try that. Thanks
Thank you mate, I been paying for TA to replace and now that I watched this video I replaced mine just now ..!! Thanks again mate
You were right to tighten bolt at first then loosen nut a old timer taught me that trick also penatrating oil a few days before a job and last heat if needed anyway thanks for sharing your experience .
Thank you for this brother!! I just got finished knocking out both of mines! I appreciate the sharing of your knowledge!!!
Thx bro you saved me $35
Didn't know it was that easy
Excellent job Eduard!!!
Awesome Video!🎥
Awesome video bro very helpful ❤thanks 👍👌🙏🙌
Thanks for the video. With a shifting spanner the handle should be pointing in the direction you are turning, this stops it jamming. Also cheap shifters will jam as well. This is not a negative for your video just some people don’t know this.
Nice work. I struggled the first time I did one.
You should never bend your air lines like you just ruin the intergity of that line possible air leak later. All you had to do is make a plug with quick connect to seal line up cost you maybe 10 to 15 dollars to make.
Put piece of wood between the chassis, simple.
@@josealjandrogarcia7144 what you talking about I said bout airline being bent not good thing. What you going to do with piece of wood for airline..
@@2lost505 he most likely means between the axle and frame... i just use a hose clamp with a vaccum boot
well done young man good job
Hi Edward thanks for video extremely helpful. Do you by any chance have the FL part number for the airbag? Thanks
Thanks soooo much for this video
I love the video
Thx for the video jist to think that i would of pay some 1 for something this simple lol and all ready have all the tools that i need for this kind of job thx again
Jose Vargas thank you for watching:)
How can i open bolt left or right it is very tight ,thanks
Thank u👍👍
Good job brother thanks u
Do you need a jack?
Thanks for the video!
After I watch this video I changed 2 airbags
Wd-40 cordless impact 5 minute job
I definitely would not have bent the hose like that. Just created a weak point in the line.
Thanks man for this video .
I have a question about Freightliner Cascadia 2016
The truck it doesn't come with airbag dumb switch inside the cab
When I need to empty the airbag I don't have switch key available
If there is any way I can add airbag switch suspension ?
thank you ...
Maher A All that you have to do is release the air hose from the airbag. Then clamp it so that it will not lose air. Once you clamp it it will build-up air everywhere else and raise the truck. Hopefully that helps
Maher A And yes you can at the switch but I personally never done it before.
Thanks for the quick reply ..
Appreciate for this information
the think making me asking about to add the airbag suspension switch keys inside the cap because I do hook and drops trailers 3 to 4 times a week and you know if I have airbag switch key inside the cab will make it easier ..
anyway I will check like you said
Thank you ...
Whould this airbag fit a peterbilt 579?
Why you riding his D we know it's not proper its calling working with what you have to get the job done.good video bro good to see that you are handy and not scared to get your hands dirty like a lot of people
This jumping how many kg weight taking
Excellent video, thank you very much, I am interested to know what the front suspension is called, since I am developing a preventive maintenance plan for a tractor very similar to yours, I have already investigated and I know that the rear suspension is Freightliner - FAS II Airliner- Suspension pneumatic axle in tandem 46,000 lb, but I would be very interested and would appreciate if someone told me what the rear suspension is called
Parabolic leaf suspension
God job!
Doing it the hard way... n quite possibly ruin t air line...ouch
USING REAL TOOLS!!!
😁😁😁😁
👍👏👏👏
Thank you
Why you Band air pipe
I don't thing this is Right way to Change Air Bag Or you also not using Proper tools Your Universal T is Damaged
I wonder where’s Edward now, single? lol
Anyone else get a Ricky Bobby first tv interview vibe?
Why no finishing?
Proper tools would help !
thanks for this video bro
Maj ata ha ye kaam lorher pakistan
Maj karna ha ye kaam g
Bad advice never bend your airline 🙄🙄
Plug it with a screw then after cut the damage end off E Z P Z
And let the truck run
🌹👍🏻
oh da
I am a Automobile Technician.! I have done a Diploma in Automobile
So..wat yu want? Armi medel or leter frum king??
That was going to be hot 🥵 and balding (without blocking up the truck because consuming foods with Chloride and hydrogen magnetizing little hydrogen make a lot hotter.
Not trying to criticize your work but bending that plastic pipe not a good idea
I know thank you
Sorry, but this video is pants.... a broken breaker bar and adjustable wrench....really?
Martin Taylor yes I would have nice tools if was rich but I have to work with what I have. Donations are being accepted;)
Hey Martin, Instead of harping on him and his tools, just remember something he didn't pay 125.00 for someone else to do the work. Not to mention it's nice to see you get truck drivers know what to do on their trucks.. too many lazy truckers out there who don't do work to their trucks.
Hello this is not Proper Manner to Change Air Bag
Did u use a jack