So I have to have Alfaobd bypass & the Ezlynk bypass hook up at the same time? If I want to keep them hook up besides installing & taken them back off.
Both will plug into the can bus block, you should have enough ports. You may not need the bypass cable for ez lynk if you install the kaod tech as this wires the truck like the ones prior to 18+.
The point of this product is to enable the feature and not have to cut into the factory harness. There is no power to this circuit for running lights like the 2019+ trucks have. This is also the easiest harness to install with no wires needing to be run anywhere else in the truck.
Make sure you have enough storage space and that you have the paid subscription and that your os is up to date. Aside from that what exact issues are you having?
@@MKSPerformanceOffroad I haven’t established an account yet $$. So first & foremost I have to pay for a google account & then I can access google store?
@@johnmacias01 no, the only thing you need to pay for is the licensed version of alfaobd otherwise you will have the demo version that will only allow you to view what you can do
I have a question. I order the Alfaobd link over the weekend. So I got it today on ups. My question is will the unlock cable I got from ezlink for tunes. Will it work for the unlock or bypass for Alfaobd or do I need to buy a Special one for this Alfaobd
2018 + Trucks need the sgm bypass cable. To my knowledge the bypass cable that comes with programmers only allows ECM programming and not BCM programming.
@@MKSPerformanceOffroad. Ok I order a Kaodtect just now. When it come I have to run it 1st. The connect the Tuner bypass Cable to it? Thanks for the advice.
No matter what I do, the “current status of component : no” never changes to yes. And it doesn’t work
Just hard wire them to a park light signal and they work
Until you back feed a module.
Wait so wat do I need for the lights to work because mine only move but lights don’t turn on I need harness?
So I have to have Alfaobd bypass & the Ezlynk bypass hook up at the same time? If I want to keep them hook up besides installing & taken them back off.
Both will plug into the can bus block, you should have enough ports. You may not need the bypass cable for ez lynk if you install the kaod tech as this wires the truck like the ones prior to 18+.
Will these be back in stock soon?
We are currently working on this and should be fairly soon.
What’s up with using the dimmer is that controlling the brightness of the mirror? Would I have to enable that feature for these to work
Yes these are a dimmable circuit once the harness is installed. The programming for these are in another video.
I gotcha I’m pretty familiar with alpha obd but was wondering is it a pretty notable difference when dimming the lights
Will this work with non tow mirrors so you can make them DRL lights
It should but it has not been 100% confirmed by manufacturer.
Why is the cable needed? No one tried just changing the settings in some way to make the DDRL, no splice in cable?
The point of this product is to enable the feature and not have to cut into the factory harness. There is no power to this circuit for running lights like the 2019+ trucks have. This is also the easiest harness to install with no wires needing to be run anywhere else in the truck.
That intro sounds like plagued moth
Does your laptop have to be hook to the ethernet when making changes?
Depends on the comms device, if you are using a BT device no but with the obdlink EX cable yes it needs to be plugged in.
So you saying if you use the cable hook to laptop. It needs to be hook to ethernet then too
@@rogerstewart5140 no need to hook to internet unless you need to upload or save a bcm config to google drive.
@@MKSPerformanceOffroad how much is the license verion for laptop?
@@rogerstewart5140 I believe $50
Hello, I have some of the same, but I have a problem when I turn on the high ones, the low ones turn off. How can I solve it? Thank you
I have not heard of this, mainly the fogs will drop out when highs are activated.
I’ve been trying to load Alfa obd on my android fire 8 tablet. I’m having numerous loading issues any suggestions or anywhere to direct me. Thanks
Make sure you have enough storage space and that you have the paid subscription and that your os is up to date. Aside from that what exact issues are you having?
@@MKSPerformanceOffroad I haven’t established an account yet $$. So first & foremost I have to pay for a google account & then I can access google store?
@@johnmacias01 no, the only thing you need to pay for is the licensed version of alfaobd otherwise you will have the demo version that will only allow you to view what you can do
How much is the license account too?
I have a question. I order the Alfaobd link over the weekend. So I got it today on ups. My question is will the unlock cable I got from ezlink for tunes. Will it work for the unlock or bypass for Alfaobd or do I need to buy a Special one for this Alfaobd
2018 + Trucks need the sgm bypass cable. To my knowledge the bypass cable that comes with programmers only allows ECM programming and not BCM programming.
@@MKSPerformanceOffroad. Ok I order a Kaodtect just now. When it come I have to run it 1st. The connect the Tuner bypass Cable to it? Thanks for the advice.
@@rogerstewart5140 yes, the kaodtech bypass should stay installed and then you should be able to plug the bypass harness for ezlynk in.