Alfaobd | Alpharex Pro series Headlight programming LED/HID Lighting (4th Gen Ram 1500/2500/3500)

แชร์
ฝัง

ความคิดเห็น • 136

  • @MKSPerformanceOffroad
    @MKSPerformanceOffroad  4 ปีที่แล้ว +5

    Andre Locklayer, I had no light out messages on the dash or any warnings or even weird things like hyperflash happening. However, when I checked for faults I pulled 2 which were both for turn signals so you may have something set but not know it. Either way, if you put LED lights in you should set the HID to enable to disable pwm as it is not needed to vary the voltage to the bulbs.

    • @offthecliff4121
      @offthecliff4121 7 หลายเดือนก่อน +1

      Hey how you doing bro? I have the same lights in my ram and for some reason the high beam (the big bottom one) for one of them wont come on. Any suggestions??

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  7 หลายเดือนก่อน

      @@offthecliff4121 what bulbs are installed and are they connected properly?

  • @charlesthompson7436
    @charlesthompson7436 9 หลายเดือนก่อน +1

    Thanks, it explains the problems i was having with my 2014 ram 1500. I purchased a set of Vland led headlights, headlights worked but the turn signals and drl's were a no go. I received the turn signals were out message when they truck started and when i turned on the turn signals they hyperflashed on the mirror and in the rear bulbs. Also switching high and low beams messages were displayed. Hope this does the trick.

    • @alexhdz2569
      @alexhdz2569 3 หลายเดือนก่อน

      Did this fixed your problem?? I also have Vland headlights and im having problems with the blue startup sequence…

    • @charlesthompson7436
      @charlesthompson7436 3 หลายเดือนก่อน

      @@alexhdz2569 no, asked for tech support and no response so i sent them back and just upgraded the bulbs with Auxito led's and have been quite satisfied, error free.

  • @SuperBIGWINGS
    @SuperBIGWINGS 3 ปีที่แล้ว +4

    I just installed these headlights for my ram 1500 and getting parking light out would that be the what you should us how to fix I just ordered the obd and got alfaobd

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      Possible, try enabling/disabling the proper settings.

    • @BAMaher
      @BAMaher 3 หลายเดือนก่อน

      Did this fix your issue?

  • @mr.anderson910
    @mr.anderson910 2 ปีที่แล้ว +1

    Alpha obd did say the software for iOS devices has been in the work for some time via email but no release date anytime soon and no software for Macintosh anytime soon either unfortunately.

  • @david14fan
    @david14fan 2 ปีที่แล้ว +2

    This is also a option I had to change on mines for anyone who’s also doing this I had to change vehconfig 3: high intensity discharge headlamps without that option set to yes my passenger LED would still shut off without that being turned on

  • @BEASTProjects
    @BEASTProjects 4 ปีที่แล้ว +1

    Great video!! Definitely could have used this for my older 4th Gen Rams.

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  4 ปีที่แล้ว

      Thanks, working on them little at a time. This program is awesome and so capable.

  • @twiddler2386
    @twiddler2386 4 วันที่ผ่านมา +1

    Do you need the 4 digit pin from the dealer to make these changes for 2013-2017 model years?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  4 วันที่ผ่านมา +1

      @@twiddler2386 you should not need the 4 digital pin for these changes.

  • @mikedrake1900
    @mikedrake1900 3 หลายเดือนก่อน +3

    So I’ve recently got the alpharex nova g2 lights. Turn signals aren’t working and the start up sequence isn’t working properly either. I’m guessing I’m needing to do this, what obd scan tool do you recommend and is there any other software I need to purchase for 2018 ram 3500

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 หลายเดือนก่อน

      I would recommend obdlink mx+, android device with alfaobd and you will require a security gateway module bypass to program. Search facebook for Matt Dougherty as he should have plenty in stock. You may also find them through Kaod tech or M2mods. The one I use is from Kaod tech, not sure if he is still making them. Happy modding! 🇺🇲🦅👨‍🔧

    • @mikedrake1900
      @mikedrake1900 3 หลายเดือนก่อน +2

      @@MKSPerformanceOffroad
      Is there one for Apple rather than android?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 หลายเดือนก่อน

      @@mikedrake1900 yes there is but it is paid and locked to your vin. Look up Jscan

    • @G_L_S
      @G_L_S 20 วันที่ผ่านมา

      Did you figure this out ? I’m having this exact problem

  • @that11gmc
    @that11gmc ปีที่แล้ว +1

    I have alpharex that I upgraded to Morimoto hid and like them a lot but my passenger blinker is out already. I have them in a 08 gmc though.

  • @robgirantino8843
    @robgirantino8843 9 หลายเดือนก่อน +1

    So is this what i would do. Cause my2017 ram 1500 i am getting low beam headlight out and parking light out on dashboard. My lowbeam light out only comes on when i turn highbeams on

  • @joe7528
    @joe7528 3 ปีที่แล้ว +1

    I currently have stock quad holengen reflective housing with supernova v4 LED's with the drive and module so far no faults in my 2014 Ram 1500 I'm considering upgrading to Alpharex like you have was wondering are the Low/High bulbs the same H7 ? I'm definitely going to get AlphaOBD MX+ and buy the full version app

  • @garretsturgis4487
    @garretsturgis4487 หลายเดือนก่อน +1

    I have a 2012 ram with dual beams. Just installed the alpharex pro g2. Low beams turn off when I turn high beams on would I be able to fix that with this program?

  • @BT-xv2lr
    @BT-xv2lr 2 ปีที่แล้ว +1

    How are the LEDs and the housing assemblies going so far?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  2 ปีที่แล้ว +1

      Great, I haven’t had any issues so far. These are the lower end headlight so I didnt expect as good of results like the totally LED light from alpharex. Some people have mixed reviews but in my case they are still better than stock.

    • @BT-xv2lr
      @BT-xv2lr ปีที่แล้ว

      @@MKSPerformanceOffroad Great to hear that. I'm going with the same setup. My alpha's are in already , just waiting on my hakari titanova's to come in. Thanks for taking the time to reply !

  • @anthonyb8405
    @anthonyb8405 3 ปีที่แล้ว +1

    can you check and see if the "one touch lane change" can be adjusted to go beyond 3 blinks? and also for "DRL lamp location"...what options does it show?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว +1

      I only see for 2013-17 where you can enable the lane change but not adjust it. As far DRL Im showing high beam, low beam, turn signal, fog lamp, dedicated, and srt light bar.

    • @anthonyb8405
      @anthonyb8405 3 ปีที่แล้ว

      @@MKSPerformanceOffroad is there an option to enable the side mirrors to tilt down when shifting into reverse?

  • @colestreit1500
    @colestreit1500 3 ปีที่แล้ว +1

    I've heard that LED bulbs aren't the greatest with Projector headlights. Right now I am on the fence about which bulb I should go with. LED or HID. I love the fact that LED is instant especially with high beam and that there is not all the wiring that comes with HID. what do you suggest?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      I like the LEDs and honestly they have pretty good light output. I went with the LEDs all around because HIDs have a warmup time and are not good for high beam use. You could do HID lows and LED highs but I havent tried the HID mainly for the reason stated and extra wiring. Best light output would be with a true LED light from aloharex

    • @colestreit1500
      @colestreit1500 3 ปีที่แล้ว

      @@MKSPerformanceOffroad I have everything hooked up correctly, fuse tap in F66 but my DRLs will not stay on. Any suggestions? The lights will turn on when lights or parking lights are on but not when everything turns off

  • @brooklynedwards8813
    @brooklynedwards8813 ปีที่แล้ว +1

    I'm trying to search in comments and not seeing this. I have morimotos, will this work for those?

  • @gastonemondaguilar5599
    @gastonemondaguilar5599 3 ปีที่แล้ว +1

    Did you use a security module bypass?

  • @bryancalixto35
    @bryancalixto35 2 ปีที่แล้ว +1

    What leds did you use for the low beams ? And how do you like them?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  2 ปีที่แล้ว

      H7 bulbs from Hikari, Im happy with them but some people have mixed reviews. I plan to try some Lasfit led bulbs soon.

  • @landinharris9704
    @landinharris9704 3 ปีที่แล้ว +1

    I have the exact same setup with the same bulbs. Which bulbs did you use for hi/low beams?

  • @killaj4585
    @killaj4585 ปีที่แล้ว +1

    Just installed the pro series. Went well. Threw a parking light out code after about 16 hours. Everything still works other than the daytime running lights on the passenger headlight. Please help.

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  ปีที่แล้ว

      Sorry to hear your having some trouble with these, do you have IG? If so please contact us there and we can see how to best help with your issue.

  • @jimbrohammer3456
    @jimbrohammer3456 4 ปีที่แล้ว +1

    Have a 2015 Ram. How do you fix bulb(led) flicker using ALPHA OBD?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  4 ปีที่แล้ว

      If you havent done so yet, you need to program the bcm to tell it that there are LED bulbs present. Some guys have had luck without enabling HID as well while others had to program LED bulbs and HID enabled.

  • @Rj-bl5sx
    @Rj-bl5sx 2 ปีที่แล้ว +1

    What would you recommend I got custom 2009-18 DODGE RAM OEM PROJECTOR HEADLIGHTS WITH SWITCHBACK HALOS and my turn signal is flickering and my running lights aren’t working what do you recommend me doing

  • @caboose9446
    @caboose9446 2 ปีที่แล้ว +1

    Do you have any additional front lighting? I found your video which was helpful on doing stuff on the Alfa. I have bullseye custom auto grill lights and AlphaRex headlights. Anytime my headlights are on i get a short circuit fault left and right no location though. Only when headlight are on. Works fine with parking lights. Any thoughts?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  2 ปีที่แล้ว

      How are the extra lights wired into the truck?

    • @caboose9446
      @caboose9446 2 ปีที่แล้ว +1

      @@MKSPerformanceOffroad well tried a couple ways, first tapped into the same drl wire as the AlphaRex. Fault when headlights on. Then a separate tap. Fault when headlights on again. Grill lights have power wire on fuse tap, one wire to each turn signal, ground. Now I’m stuck. Don’t know what else to do

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  2 ปีที่แล้ว

      @@caboose9446 what is the function of the lights and where are they installed?

    • @caboose9446
      @caboose9446 2 ปีที่แล้ว

      @@MKSPerformanceOffroad mounted into the grill. Drl on all times truck is on, sequential turns.

    • @caboose9446
      @caboose9446 2 ปีที่แล้ว

      @@MKSPerformanceOffroad also after watching your video made everything led and hid is enabled.

  • @terryreedy107
    @terryreedy107 2 ปีที่แล้ว +1

    Is there a way through Alpha ODB to enable Sequential blinker? Do the factory LED’s have that as a feature?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  2 ปีที่แล้ว

      I couldnt tell you if the factory lights have the capability but if they did it would probably be in the bcm and you can search for lighting.

  • @thirdgearboogie2210
    @thirdgearboogie2210 2 ปีที่แล้ว +1

    I'm a little confused on your explanation on the installation of LEDs for headlights. You explained that, even though you have the software to enable LEDs, it can still give you issues? I guess I don't get the point of buying this program if it doesn't enable you to have Flawless operation?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  2 ปีที่แล้ว +1

      The Systems in these trucks can be funny at times. You can enable the LED options, enable HID options, disable halogen options and alot more things. The program in my opinion is worth the money if you plan to do more than just a couple things or just want a pretty decent diag tool. The type, brand, and design of the LED light can play a part in having a smooth operating LED light that is trouble free. Really just depends on the several factors but most should be easily configurable.

    • @thirdgearboogie2210
      @thirdgearboogie2210 2 ปีที่แล้ว +1

      @@MKSPerformanceOffroad Thank you for the reply. Am I better off using a Android device or a laptop?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  2 ปีที่แล้ว +1

      @@thirdgearboogie2210 for ease of use I like the android tablet but the laptop has been known to accomplish some tasks that the tablet has trouble doing for some reason. If you only want to use one device and dont mind lugging the laptop out to the truck then this is the route I’d go.

  • @davidnarciso
    @davidnarciso 2 ปีที่แล้ว +1

    If I turn on drls for this. Will I still have to connect that little red wire

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  2 ปีที่แล้ว

      You will not have drls unless you physically turn them on without wiring drl harness. www.alpharexusa.com/how-to-wire-the-drl-harness/

    • @davidnarciso
      @davidnarciso 2 ปีที่แล้ว +1

      @@MKSPerformanceOffroad ok. Forgive me. So your saying I will still have to wire it? I used alphaobd today and turned on my turn signal lights as drls. I don't have the headlights yet but I wanted to do this first. If I still need to wire than I will. Thanks again

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  2 ปีที่แล้ว +2

      @@davidnarciso correct, with the alpharex lights simply programming them doesnt mean they will be on. The functiin of the drl harness allows them to be on without you touching the switch in day time and the intensity is brighter during daylight and adjusts down for lower light conditions.

  • @lukedevries9314
    @lukedevries9314 ปีที่แล้ว +1

    Can you program it so the drl lights are the orange clearance lights instead of the white on a 2011?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  ปีที่แล้ว +1

      You should be able to change the lights that are utilized for the running lights on most years, I cant say for certain if that is the case on your 2011.

    • @lukedevries9314
      @lukedevries9314 ปีที่แล้ว +1

      @@MKSPerformanceOffroad it worked for me with a little bit of thinking

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  ปีที่แล้ว

      @@lukedevries9314 awesome glad you got it figured out

  • @Jimmybobcornflake
    @Jimmybobcornflake ปีที่แล้ว +1

    I'm having issues. I've followed this and changed all the settings to LED and have confirmed after multiple cycles that they are yes. After doing so, I still get "low beam headlight out". I got morimoto headlamps. 2014 Ram

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  ปีที่แล้ว

      Did you enable HID?

    • @Jimmybobcornflake
      @Jimmybobcornflake ปีที่แล้ว +1

      @@MKSPerformanceOffroad which setting is that?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  ปีที่แล้ว +2

      @@Jimmybobcornflake if you go into the same menu you were in, you should be able to type it into the search box and it will ask to enable hid headlights. This should turn off the pulse width modulation in the headlights.

  • @smoothpony05
    @smoothpony05 ปีที่แล้ว +1

    I have a morimoto XB led headlights..everything works but the blinkers flickers and other times don't work at all also message on dashboard says llturnsignal lights out..do i need obd to correct this?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  ปีที่แล้ว +2

      Likely you do need to turn off halogen and enable Hid/led. This turns off the pulsewidth modulation for halogen bulbs.

    • @smoothpony05
      @smoothpony05 ปีที่แล้ว +1

      Thank you.

    • @rubedogg04
      @rubedogg04 7 หลายเดือนก่อน +1

      @@smoothpony05 did it end up working for you?

  • @rustyestle7728
    @rustyestle7728 3 ปีที่แล้ว +1

    Do you still use the led lights or did u switch to hid? Also if u are still using the Hikari led which ones are u using and which one is the low beam and which one is the highbeam?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      Yes Im still using the Led bulbs. Low and high beam are the same bulb and the link for the ones I got are in the description.

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      Use the first link for hikari bulbs, those are what Im using. The second link is for the ultra bulbs which are supposedly the new bulbs they have to better mimic a halogen light source.

    • @rustyestle7728
      @rustyestle7728 3 ปีที่แล้ว +1

      @@MKSPerformanceOffroad are you going to be putting out a how to aim the headlights and the bulbs?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      @@rustyestle7728 I do plan to put together a video specifically for these headlights and the 4th gen trucks, hopefully in the next couple weeks. I wish it were faster but there is a lot of stuff going on. In the mean time, video that is linked in the video will get you buy with aiming.

    • @rustyestle7728
      @rustyestle7728 3 ปีที่แล้ว +1

      @@MKSPerformanceOffroad thank you so much for your help! Also I hope everything is going ok! I wish you a fresh new year

  • @travic2087
    @travic2087 4 ปีที่แล้ว +1

    Hey man just a quick question, I have a 2011 2500 that I am going to install the pro series on. Is AlfaOBD a must-have to run these headlights, or can I just run an anti-flicker module on it?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  4 ปีที่แล้ว

      It certainly makes it easier but there are many different ways you can correct hyperflash if you get it. Also will depend on how much you can program with a 2011. Guys have run the modules, resistors, and used alfaobd.

    • @travic2087
      @travic2087 4 ปีที่แล้ว

      @@MKSPerformanceOffroad Cool thanks a lot!

  • @HemsoonFog
    @HemsoonFog 3 ปีที่แล้ว +1

    What main led lights do you have what's the size for a 2016 ram 1500, hope you can help me out :)

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      Are you wanting low beams? Are you replacing in alpharex lights?

    • @HemsoonFog
      @HemsoonFog 3 ปีที่แล้ว

      @@MKSPerformanceOffroad yes I'm getting alpha Rex lights but don't know what's a good brand or size that fits into them for the low beam thanks man!

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      @@HemsoonFog mine were h7 on both low and high beam.

    • @HemsoonFog
      @HemsoonFog 3 ปีที่แล้ว

      @@MKSPerformanceOffroad thanks so much I ordered the wrong ones lol but thanks so much!!

  • @BASSMASTER_17
    @BASSMASTER_17 8 หลายเดือนก่อน +1

    Connected the same headlights on a 2013 ram 1500 but the bottom drl doesn't turn on any suggestions??

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  8 หลายเดือนก่อน

      Did you wire them to the correct power feed?

    • @BASSMASTER_17
      @BASSMASTER_17 8 หลายเดือนก่อน +1

      @@MKSPerformanceOffroad yes everything looks connected to the right power feed

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  8 หลายเดือนก่อน

      @@BASSMASTER_17 test to ensure you have ignition power going to the assembly and that the fuse tap is in a slot in your fuse box that is supplied power and not blank for spare fuses. Some trucks may not have the same fuse locations powered as others. If you verify power going to the light module and you have power getting to the back of the light but nothing happens, I would contact the company you bought them through or alpharex direct.

  • @sytema
    @sytema 3 ปีที่แล้ว +1

    Im going crazy trying to get my new bixenon headlight on my 2015 grand cherokee. Im getting the led flickering and no headlight at all

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      What are your settings for the headlights at the present time?

    • @sytema
      @sytema 3 ปีที่แล้ว +1

      @@MKSPerformanceOffroad in the enable bixenon and enable led

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      @@sytema are they enabled

  • @d.heisler9399
    @d.heisler9399 4 ปีที่แล้ว +1

    I have the projector assembly with led turn and DRLs and the right side turn, drl and marker has gone out with hyper flash on the panel and I can't get the Alfa to correct it. Help?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  4 ปีที่แล้ว

      If the lights went out as in they failed then alfaobd cannot correct that. You would need to replace the bad lights. Have you verified the lights are bad?

    • @d.heisler9399
      @d.heisler9399 4 ปีที่แล้ว

      @@MKSPerformanceOffroad Correction Alfaobd can correct them and did. The truck turned them off thinking its a short but what I did was add all outside LEDs and set to present so they all match and now my right side is back on and everything is working perfectly.

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  4 ปีที่แล้ว +1

      @@d.heisler9399 yes if the lights are good and not bad then Alfaobd will correct the issue. Can bus systems can shutoff lights if it senses a problem and thats why I asked if you verified the light was good not knowing how old or long they had been in use that way. Glad you got it straightened out though

  • @saddawgy
    @saddawgy 3 ปีที่แล้ว

    Did you use a retainer clip for the led bulbs? I can find them anywhere for the ram. Or is the Alpha rex already equipped for after market LED lights?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว +1

      I was able to use the retainer clip in the alpharex headlight. It was tight though

    • @saddawgy
      @saddawgy 3 ปีที่แล้ว +1

      @@MKSPerformanceOffroad Thank you! That's all I needed to know. Now I just have to wait for the G2s to restock. 😂🤣

  • @dweder70
    @dweder70 11 หลายเดือนก่อน

    does anyone know if this will work with 5th gen (2019 ram 2500)?

  • @colestreit1500
    @colestreit1500 3 ปีที่แล้ว

    I ordered those led lights you suggested, they are definitely not bright. Very soft and dim. Is that because they are projectors? Or is it the bulb

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      Might be a combination of the projector and light. Mine are pretty bright and have good illumination but I cant speak for the consistency of them. HID in the low beam would mimic a halogen light source better but you would need all the extra wiring which I didnt want or you would need to buy a more expensive bulb that is of better quality. I bought these for the cost and thought they performed well compared to the halogen bulb.

    • @colestreit1500
      @colestreit1500 3 ปีที่แล้ว

      @@MKSPerformanceOffroad what about the DRL? I have mine all connected the right way and they do not work. Connected to the battery, into F66 fuse tap.... any suggestions?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      @@colestreit1500 I would contact alpharex and start trouble shooting that little wire harness. The harness from the lights is essentially a switch and can fail. Use a multimeter and check to see that you have everything needed supplied to that harness i.e. power and ground and if there still is a problem its likely an internal issue

  • @satxification
    @satxification 3 ปีที่แล้ว

    How far is the truck from the wall when you align the low/high beams ?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      About 25ft. Slight adjustments may be needed after driving

    • @grenebulax
      @grenebulax 2 ปีที่แล้ว

      But how do you adjust them without taking them out?

  • @javiersuarez2011
    @javiersuarez2011 3 ปีที่แล้ว +1

    Hey buddy cuestión, I have a 2012 ram 1500 and. Have LED on it , also have hyper flashes when I use my turn signal , but the AlfaOBD don’t show me the settings for correct that ussue whe I select the year of the truck , it only shows me the HID option, will preciatte ur help thanks 🙏!!!!

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      Alot of times what causes the hyper flash is the pwm (pulse width modulation) when halogens are installed so guys turn hid on to disable this. If the turn signal option for LED is not there and you dont have hid headlights or LED headlights this may not help you

    • @javiersuarez2011
      @javiersuarez2011 3 ปีที่แล้ว

      Well yeah I do have LED headlights but according to the year off my truck (2012) alfaOBD don’t show me the LED option , but if I select 2013 it does , but we I hit the yes for led , it says tha the system don’t support this option, Any clue of how can I fix this, thanks for answering me 👍!!

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      @@javiersuarez2011 if it doesnt show you led option for 2012 its likely due to it not being supported by the bcm, you may have to wire in resistors or there may be a possibility to replace the bcm with a newer one from 2013+

    • @javiersuarez2011
      @javiersuarez2011 3 ปีที่แล้ว

      @@MKSPerformanceOffroad oh ok thanks for the info my friend preciatte

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  3 ปีที่แล้ว

      @@javiersuarez2011 anytime, you might check the forums, I think some guys may have experience with this

  • @FredFlintstone7
    @FredFlintstone7 3 ปีที่แล้ว +1

    Is the OBDLink MX a must or can I use a different obd reader with the alfaobd app?
    I already have a bluetooth OBD reader of different brand.

  • @jeansandmyshirt
    @jeansandmyshirt 11 หลายเดือนก่อน +1

    This doesn't work with headlight led bulbs over 50watts. I've tried it on 2012 ram.2018 2012 1500 You need a security cable to properly do it. My friend installed high low beam leds bulbs on his 2020 1500 tradesman stock headlight assembly. One side would shut off randomly
    He had to get the chrysler security bypass cable and use jscan. But jscan costs $30 per programming license. It worked perfectly thought.

  • @olehyanchyshyn5133
    @olehyanchyshyn5133 3 ปีที่แล้ว +1

    Which hikari LED you put on low beam? I want do same as you

    • @olehyanchyshyn5133
      @olehyanchyshyn5133 3 ปีที่แล้ว

      Also i did programming all the LED to YES (low beam, turn signals) and the turn signal starts working with no problem now, but the low beam which staying Hikari Ultra fokus h7 stop working after 20 sec, and show me 4 codes on a tablet.. do i need to program something else or i need swap bulbs to Hikari vision plus?

    • @olehyanchyshyn5133
      @olehyanchyshyn5133 3 ปีที่แล้ว

      Got solutions, for dodge also need say YES to VehConfig 3: High Intensity Discharge Headlamps- YES
      Now is everything works, thanks for your video 👍

    • @olehyanchyshyn5133
      @olehyanchyshyn5133 3 ปีที่แล้ว

      Got solutions, for dodge also need say YES to VehConfig 3: High Intensity Discharge Headlamps- YES
      Now is everything works, thanks for your video 👍

  • @mattpoe1974
    @mattpoe1974 4 ปีที่แล้ว

    How did you orientate the bulbs in the housing ?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  4 ปีที่แล้ว

      Leds should be at 3 and 9 position

    • @mattpoe1974
      @mattpoe1974 4 ปีที่แล้ว +1

      @@MKSPerformanceOffroad So the bulb should point side to side not up and down?

    • @MKSPerformanceOffroad
      @MKSPerformanceOffroad  4 ปีที่แล้ว +1

      Correct side to side