Changing Oil Cooler 2015 Ram Tradesman V6 3 6L Pentastar (Will work for any 3.6 Pentastar)

This video is of changing the oil cooler in a 2015 Dodge Tradesman 3.6L Pentastar engine.
Torque Specs
Upper Intake 89 in/lbs
Lower Intake 106 in/lbs
Oil Cooler Part amzn.to/42klTyw
Oil Cooler Video • How To Replace an Oil ...
Part 1 Rocker Replacement • Chrysler/VW 3.2 and 3....
Part 2 Rocker Replacement • Chrysler/VW 3.2 and 3....

[@rickbaier1042]

90 percent of these oil cooler failures are 5 min oil change places related. They over tighten the cap. Alot of them you can tell just look at the bolt put a white sharpie mark on the cap for tightening reference.Did this from day one. #2 do not put 5w20 in these engines only use pennzoil ultra synthetic 5w30.. 276k on my 15 durango

[@garrettjohnson1382]

I did mine and changed it with the all aluminum also and it still leaks coolant and oil just not nearly as much I’m just going to take it to a shop I trust and tell them to do, it such a pain 😩

[@TexanDumpService]

Did you drain the coolant for that hose?

[@RanfranzRanch]

I don’t believe I drained any coolant it was high enough in the system.

[@hectorlucero9158]

Do you need to drain the oil when changing it??

[@RanfranzRanch]

I didn’t it’s so high in the system it wasn’t an issue. But I would recommend changing the oil at the same. But don’t need to.

[@heythere6983]

I’m too stupid to do this

[@RanfranzRanch]

Nah you can do it just take your time watch other videos too you can do

[@quoc-anhtran6439]

Thank you. You explained better and quicker than all other youtuber. Make it easier for me to follow.

[@dmurray2978]

Thanks gonna try this soon

[@RanfranzRanch]

Hope it goes well good luck

[@13612]

I think this might be my leaking oil source based on google search and not seeing source of leak. This looks like a total SOB to do without tech experience.

[@hanoszprime5431]

Do the gaskets need any kind of adhesive ?

[@RanfranzRanch]

No they are rubber gaskets that just compress

[@Ty_Rain]

I got that same ticking in my doge been wondering what it was 😂

[@RanfranzRanch]

It’s a big job but doable but do it before your cam gets wiped out like ours and you can save 500 bucks.

[@davidbottles3035]

I’m sorry, this is so unwatchable.

[@RanfranzRanch]

Guess it isn’t for you

[@Michelle-fy4vq]

Thanks to you and the other TH-cam channel called NOTAMECHANIC I feel like I can do it myself also can you tell me what brand oil cooler with the gaskets you purchased also has it held up still or did it start leaking again?

[@RanfranzRanch]

The link to the part we got is in the description. This is a part from Amazon probably not the highest quality but it came will all the gaskets and hasn’t leaked of had any problems as of now.