How To Remove & Install The Rear Wheel On Your Dirt Bike | FYDB
ฝัง
- เผยแพร่เมื่อ 9 ต.ค. 2017
- This is how to remove and install the rear wheel on your dirt bike. Start By placing your bike on a stand so the rear wheel is off the ground.
The tools you will need are:
A Socket with a breaker bar
A Block of wood
A wrench for chain adjustment jam nut
A wrench for chain adjustment bolt
A torque wrench
And a Sharpie Marker
See The Step-By-Step Guide HERE → bit.ly/rwrein
You Can Get All The Dirt Bike Parts And Tools You Need HERE! → amzn.to/3gM6L6Z
Check Out My New Merch! → bit.ly/FYDBMerch
If you don't have them yet, you can get your other parts and tools HERE. → amzn.to/3gM6L6Z
#FixYourDirtBike #HowTo #DirtBikeWheels
-----------------------------------------------------------
Questions?
Website:
FixYourDirtBike.com
Directory:
FixYourDirtBike.com/Directory
Facebook:
FaceBook.com/FixYourDirtBike
Forums:
FixYourDirtBike.com/Forums
Instagram:
/ fixyourdirtbike
Twitter:
/ fixyourdirtbike
You can help me take Fix Your Dirt Bike to the next level by supporting me At Patreon - / fixyourdirtbike and buying your parts here - www.fixyourdirtbike.com/shop-...
My Recording Gear:
Camera: Cannon 70D - amzn.to/3zwY3ki
Camera: Cannon 80D - amzn.to/3DwcCXv
Camera: GoPro Hero 4 Black - amzn.to/3mJt4h9
Camera: GoPro Hero 8 Black - amzn.to/3Dv9SKa
Camera: Android Endoscope - amzn.to/3kwtVPG
Microphone: Rode Videomic - amzn.to/3kAj3jT
Lighting: Fancierstudio 2400 Watt Lighting Kit - amzn.to/2YcFUKM
All media, unless otherwise specified, is the property of Mantle Media & Consulting, Inc 2021.
As an Amazon Associate I earn from qualifying purchases. - ยานยนต์และพาหนะ
![รวมเพลงลูกทุ่ง 6 หนุ่มไทบ้าน ฮิตติดกระแส ชุดที่ 1 l มนต์แคน ไมค์ ไผ่ เสถียร ไหมไทย พี [Longplay]](http://i.ytimg.com/vi/GD2v1OjMw5I/mqdefault.jpg)
Checkout more *Wheel & Tire* how-to guides! → goo.gl/LZiVrz
Fix Your Dirt Bike ok
This is how a video shoud be, short, sweet, straight to the point. I love the total lack of "fashion words" like "today", "go ahead and...", basically", "litterayl" etc.. I am subscribing. Thanks!
Your videos should be a template for every other "how to" video. No fluff. Good, well laid out, easy to follow information. Thank you.
Thanks for not wasting our time.
Brilliant!!! Quick, easy, forward and bang on. Cheers 👍
Hi there. I have a quick question. First of all, I’m in the process of installing the rear tire on a 1996 KX 250 Kawasaki that I restored. Hence the question: What is the appropriate clearance between the swing arm and the rear tire ? I really will appreciate any advice you may be able to offer.
Hi hope ur ok .I got my axul stuckin bike how do I get it out lol its stuck in cut both bolts off both end and still dos not wont to come free any ideas plz would be grateful 🙏 ta
Talked too fast, I put it on 3/4 speed and was about right
Great video! Simple and quick. Thank you!
Glad you liked it!
Thank you easy to the point no bullshit.....great vid bro
Hello, just bought a 250 and the rear wheel won't engage. Transmission and chain and sprocket is turning but nothing to the driver wheel..... bought shaft? Ideas?
3 fingers of chain slack on the ground or on stand?
Awesome short and sweet!
Exactly what I was thinking, short and to the point! Very well done!
My neighbor let me have an old 2001 KX 65 for helping him move. I haven't been on or worked on motorcycles in probably 20 years. I cleaned the carburetor, cleaned up the motor, changed every fluid possible, air filter etc...
Once I got it started I remembered why i loved motorcycles so much. Now I just need to change the back tire and my fat ass is going to take this little KX out and hopefully not break anything😊
What happens if the rear brakes pads won’t open? So that I can slide th me tire in.
Hey man I know this videos old hope you’ll find this comment, I have a 2000 kx80 and the rear axle rod refuses to come out of the bike. I think it’s insanely rusted and caked up inside it’s stuck. I’ve got it abut halfway out with a nut wrench and a hammer and a shitload of wd40, you got any tips or is my last resort completely rebuilding the rear end.
hey soo i have some 3 things from the wheel like some tubes.
You are the man. Straight and to the %^+ing point.
Just got a new, smaller sprocket for my bike. Wish me luck.
hello thanks for the video. should the spacer move with the wheel or stay stationary?
Thanks for watching! The spacer should NOT spin.
I have a question: is it normal to have a left and right gap between the swingarm and the wheel hub, spacers, bracket?
Does the hub slide side to side on the axle?
.. Cool instructions.. But should I put Wight on seat for chain slack..? 🤔
No
Good morning
I just changed the rear tire on my sons 2021 cr 250. We had to open the rear caliper just enough to remove and re install the wheel. After getting it all back together and pumping the rear break to close the piston on the caliper it just does not seem to grab like it did originally. Any suggestions? We can’t afford to take our bikes to the dealership when we have basic maintenance. Tires oil ect.... if anyone has any advise I would really appreciate it.
Thanks everyone
Do a reverse bleed to remove any air in the system. bit.ly/rvrsbld
im stuck my axle refuses to budge any tip on how to break this seal used wood, rubber hammer pry bars etc
How far out is it? Is it stuck half way, or not moved at all?
1/2” or 3/8 breaker bar? I’m new to working on bikes and was confused on which would be the better option to go with...
1/2"
Fix Your Dirt Bike Thanks
On my pit bike the nut on axle bolt seems to be really hard to loosen. Not sure if I can even get off ( need to fix flat tire).
Pit bikes usually use a locking nut, so you will need to use some force.
Turned out they cross threaded the nut on my axle from factory so I had to replace it as do the tube
I forgot to count the threads when I first took it off I didn't know you had to count threads
You should be ok.
Is this the same for the rm85
Very similar but not exactly the same.
Ok so my axle won’t come out at all and I’ve beat the crap out of it, any ideas ?
Just to check, you loosened the chain adjustment bolts?
Im 14 and i have a stomp 120cc, and i need
A new inner tube in my rear wheel
New rear wheel spokes
A new kickstarter
and maintenance
I saw this video in my recommended and its motivated me to fix it (Gonna be a big job cuz i dont have any mechanics near me)
Let me know if you need any help!
Fix Your Dirt Bike thank you
after i’ve loosened all the bolts the axel will not come out, it won’t even budge even with a hammer
Will your axle slide in the swingarm? Are the adjustment bolts touching the axle/block?
I have the same problem on my 1999 rm80
My axle won’t come out do you know why
What have you tried so far?
I just used a rubber mallet and it didn’t buge
Soak it with anti seize, then put a block of wood on the axle, then hit the block with a hammer. Sounds like your bearings are seized to the axle.
My muthafukin axel won't come off either shits pissing me off
When I try turn it the whole axle just spins
Do you have your axle block on the sprocket side?
Fix Your Dirt Bike no I do not it’s a pitbike
My rear wheel is wiggly and the star sprocket thing also moves what do I need ??
It sounds like you are missing a spacer or your axle is loose.
Can u do one on a pitbike pls bro
I will as soon as I get one!
Clean your shit bro!
Your video is way too quick for the people that are looking at this video
Then watch it twice.