Damn two of mine didn't have continuity! I picked this XBox slim off the side of the road! Aside from needing a new hard drive, it had everything - controller, video cables, power supply... It was even dust-free! Like brand new! I just fixed those resistors up, and it runs like new! Thanks brother!
Thanks so much! All I did was reheat the solder on both sides of the one resistor that was giving me a bad reading and checked the ohms. That fixed it and I didn’t have to add any solder.
I found other videos before this one that recommended bridging the resistors, but I figured I’d just try reflowing the solder connections first like you described. Worked like a charm. Thankso mucho.
I just got code 0013 with a brand new XBOX 360 slim in box that was in storage. Could I just make a solder bridge for all of these or would that be an issue?
Bro please help me, i was doing some remonte recoverys on bo2 then i froze so i rebooted my rgh and now it doesn't start like the Xbox logo doesnt even come up and i cant load on to xell please help:(
I don't get a code it's just green then red dot fan is spinning normal CPU is hot as fk and no code or any picture tv shows no signal when this happened the consol crashed and pixels came at the under 50 % on screen complete froze never started again what would you say?
4 years later, but best to document this encase someone else is looking. The 360 S doesn’t display the code on the video output, it instead uses ring on the front, but you need to tell the console to display the code. Here’s how: - Boot the console, wait for the red dot - Hold down the sync button, then press the eject button - The console will beep and 1-4 of the player lights will illuminate. Make note of how many light up. - Press the eject button three more times, this will give the final three digits of the code. - Research the error codes online. There is a guide that will better explain them. 4 lights should be interpreted as a 0. -> Example; my 360 S recently became of a victim of error 0011, my lighting codes are as follows; 4-4-1-1
These are 0 ohm SMD 0402 Resistors. You can also remove them and Bridge the points with solder instead of replacing them.
Damn two of mine didn't have continuity! I picked this XBox slim off the side of the road! Aside from needing a new hard drive, it had everything - controller, video cables, power supply... It was even dust-free! Like brand new! I just fixed those resistors up, and it runs like new! Thanks brother!
Thanks so much! All I did was reheat the solder on both sides of the one resistor that was giving me a bad reading and checked the ohms. That fixed it and I didn’t have to add any solder.
Wow, never believed it would work, but it did! R4D3 had no conducivity. Removed it and bridged the points and the console booted!
I found other videos before this one that recommended bridging the resistors, but I figured I’d just try reflowing the solder connections first like you described. Worked like a charm. Thankso mucho.
You should get a little camera setup that has an over view of what you're doing and make videos of you installing everything
By resoldering do you mean bridging them?
Thank you! I bought a red dot 360 on eBay. I only had to touch up around one resistor and it works perfectly!
for anyone looking im pretty sure this also applies to secondary error code 0013
you're amazing keep up the good work
I just got code 0013 with a brand new XBOX 360 slim in box that was in storage. Could I just make a solder bridge for all of these or would that be an issue?
can the GPU/APU be re-flowed by heating from below as was done at the factory ??
I cannot find the resistor how do I get in touch with you
What about error 0002? Any help with that?
Where are you located mines just started doing this
You are the greatest. I owe you big. My xbox now is working. Thanks so much!!!
What if u checked them and they are all good?
Were did you buy the resistor? I cant find it anywhere online.
These are 0 ohm SMD 0402 Resistors. You can also remove them and Bridge the points with solder instead of replacing them.
Can someone help me my console isn't connecting to the internet it connects to the network but fails on internet
Awesome !!! It work just as a new one !! Thanks !! I admit that you need to very precise to execute it, but patient leads to good work !!
Bro please help me, i was doing some remonte recoverys on bo2 then i froze so i rebooted my rgh and now it doesn't start like the Xbox logo doesnt even come up and i cant load on to xell please help:(
But how do you find the resistors?
it worked like a charm, thank you.
What do the codes 0010, 0011, 0012 stand for?
Just fixed mine with this, thanks!
0032 on my 360 corona, what I have to do? Please help 🙏
How about 0022 for corona ? Xgcpu reflow?
pls can u help my set up my rgh?
I don't get a code it's just green then red dot fan is spinning normal CPU is hot as fk and no code or any picture tv shows no signal when this happened the consol crashed and pixels came at the under 50 % on screen complete froze never started again what would you say?
4 years later, but best to document this encase someone else is looking.
The 360 S doesn’t display the code on the video output, it instead uses ring on the front, but you need to tell the console to display the code. Here’s how:
- Boot the console, wait for the red dot
- Hold down the sync button, then press the eject button
- The console will beep and 1-4 of the player lights will illuminate. Make note of how many light up.
- Press the eject button three more times, this will give the final three digits of the code.
- Research the error codes online. There is a guide that will better explain them. 4 lights should be interpreted as a 0.
-> Example; my 360 S recently became of a victim of error 0011, my lighting codes are as follows; 4-4-1-1
Do you ship to Canada I really want a rgh but on the website it only lets me ship to USA
I ship to Canada. email me at sales@toxicconsoles.com
This works! A very big Thank you.
what is the proper way to fix a rrod regular console
corona tutorial during corona
Huh I didn't realize checking continuity would be a good way of checking these guys. I've pinpointed the bad one, now to try and fix or remove it
can it fix the error 0013?
I had a xbox 360elite on the shelf for a week or 2 and then the error code 0010 just started happening. Its not even modded
Hey I would like to ask you some questions where can I contact you
Do you ship to the UK?
Get out of here fake fuck ^^^ i dont ship out of the us. STOP TRYING TO SCAM!!!
Hello my secondary error code is 0101 what’s wrong with my console
Something wrong with the cpu I believe
Please please please
a video for new aurora 0.7b
Can you help people out with building a rgh?
Mad Shark bite - Sharky's Customs ahahahahahaaaa
Mad Shark bite - Sharky's Customs cares about his subscribers and Customers
Mad Shark bite - Sharky's Customs also do you know how to fix No signal error and be able to sync controllers to rgh because mine has some errors
BlueModz thats a scammer^^ hes not the real sharky lmfao
Alerted DEX who lol
Hey do u still sell rghs
Mad Shark bite - Sharky's Customs. I already texted u on kik and u said that u were goona sell them again in september my kik is trippie drippie
Work perfect 🙏🙏
Life Saver!!
Hey can I buy a rgh Xbox pls I really want one
good work
When are you making more rgh Xbox360?
Mad Shark bite - Sharky's Customs my Kik is noahfares2144 please message me asap
PLEASE PUT MORE RGHS IN STOCK!😭😂
What is your kik?
Mad Shark bite - Sharky's Customs it's just "Lixify" I kiked you
is aqua silvermist legit
look for a rgh you aint say none come on
Hi
I not got kik u sell on eBay and I pay on eBay
Joe Walsall away days Lololol
Joe Walsall away days You're Ignorant.
Joe Walsall away days his kagan's kik is in the description