One of the most surprising aspects of your work is your age. You clearly have a passion for restoring items which have missed out on TLC and your patience for meticulous work is greatly rewarded by the finished results. May you continue to go from strength to strength!
This channel is great! No talking or music. Ideal for a cantakerous misery like myself who finds pretty much everything annoying these days. Keep up the great work, fella!
Tilley lamps and pressure stoves were the stuff of holidays and scouting when I was a kid in the 60s and 70s. My parents used them when we went on camping holidays in the '60s. When I joined the scouts in the 70s they were using them too. Great to see one still working. I think our stoves were Primus, though Tilley made them too. The modern ones aren't as well made, so these antique ones are much more of a pleasure to use.
I love your videos. I admittedly have a short attention span and so most videos I watch are around 3-6 minutes. Yours, however, are somewhat hypnotic and never seem long. Something about the sounds and watching something old become new again is therapeutic. I feel the same way about the "Car Cleaning Guru" channel. His voice is soothing like Bob Ross and watching the cars go from grimy to new is wonderful. Thanks!
Nice restoration! Them tilleys are classics. A few things to note if you plan on using the lamp: The paint on the hood will not withstand the temperatures, hence why tilley enamelled to hoods originally. The washer and washer holder on the pump is the wrong way round ( the rubber should face the tank) and finally the mantle should be tied at both ends of the burner. Good luck.
Very Good points, I thought the mantle at the end was broken, but as not tied at both ends, which i did not realise in the video that may/will explain why i thought it looked broken.
Fantastic work and great video. Only things worth a comment from me i think is the Paint on the Top will not take the heat, it was enameled originally for this reason and the Mantle looks like it is, has been torn broken, however another poster noted that the mantle had only been tied at the top during the assembly and normally is tied top and bottom? In my experience of Mantles (not on Tilly Lamps) they normally only have one tie and like a bag or balloon shape, this said I have seen what "appears to be two ties being removed on some Tilly mantle assemblies. So Tilley's may have different mantles and fitting methods. Either way there is something wrong with the Mantle on the finished one and the one burning looks broken. PS - looking at video again it can be seen that when the old hood/top is removed and turned over to see the old manttle or what is left of it it can be seen that the Original Mantle was tied in to places and the pipe was left passing through the manttle and the left OPEN. This means the mantle fitted was the wrong type and not one for this Tilly lamp. The one that is for this Tilley will have two ties.
A very interesting restoration,on a very good English product, you did a first rate job,and saved a very useful piece of equipment,you never know in this day and age when you just might needs it on a regular basis,you video gets my thumbs up
This is a beautiful old lantern. The only ones I've seen here like that are either red or green Coleman lanterns. The brass makes this one look really special. Great project!
Smashing job mate, it looks like new. This has got me thinking of getting the old lamp from the shed and doing a restoration myself, trying one out anyway. Thanks for the inspiration!
lovely job, hope all the paint hold up to the heat them lamps give off. used to use one of them when fishing in the winter as they come in handy to warm you up.
Its so satisfying to see that you are as perfectionist as i am you did so many things that i thought you wouldn't do because they werent that necessary but thats why i love this channel , great work as always dude keep it up :)
I've watched several of your videos, all of which seem to keep my attention. This particular video was satisfying in the fact that you showed the lantern glowing like it did when it was being used. For someone who seems younger than some guys I've watched on here, you really pay attention to detail. Wish I had you close by, I have a few things that could use your Midas touch! Keep up the good work!
Great restauration. Last time i used Tilley was something like 20years ago in Finnish army. I remember that they are crazy bright and bursts into flames if not used properly.
This looks really cool! One suggestion: I'm not sure if this is the case with your mantles, but I believe you're supposed to burn them in by holding an open flame over them. They'll shrink to the size of the lantern and then you remove the flame. After this, you can pump the gas and then light the gas. This prevent the creation of holes in the mantles, providing a more efficient burn.
Liked the video before I even watched it, finally a Restore It video!!!! Keep it up bud. Edit: now that I’ve watched it, I’m wishing there was a vote up button or a 5star scale. That thing came out bad ass.
Oh you remind me when i was 15 when we were at leeds city in 1981 my father buy this same candle our was red and black from the top miss old days at uk i visit it last these 10 years and its not like the 80 or 90 all change any way thank you with love and peace from dubai
Well done, good video on the restoration. Shoot and continue to these videos. I also began to try myself in the restoration of the video on the channel .👍👍👍
That ones a tough call. I would have left it aged, and just cleaned it a bit, but it's a personal preference. It does look pretty fantastic. I understand you're in the school of "renew", which is completely valid too. Particularly when done with such care.
![Villiers MK15 Engine - Barn Find [Restoration]](/img/n.gif)
One of the most surprising aspects of your work is your age. You clearly have a passion for restoring items which have missed out on TLC and your patience for meticulous work is greatly rewarded by the finished results. May you continue to go from strength to strength!
I second that! Nice comment MatchstalkMan!
This channel is great! No talking or music. Ideal for a cantakerous misery like myself who finds pretty much everything annoying these days. Keep up the great work, fella!
Restore another one!! It never gets old, you have inspired me a lot. I restored 3 of them
What an elegantly designed machine. I commend you on first class restoration.
The lamps give such an incredible beautiful light, soooo much better than any kind of modern light.
The attention to detail is so intense with this guy, it creates an immaculate finished product.
Tilley lamps and pressure stoves were the stuff of holidays and scouting when I was a kid in the 60s and 70s. My parents used them when we went on camping holidays in the '60s. When I joined the scouts in the 70s they were using them too. Great to see one still working. I think our stoves were Primus, though Tilley made them too. The modern ones aren't as well made, so these antique ones are much more of a pleasure to use.
Mister, let me tell you something.
You are a magnificent artist.
Every one is an expert. You do it how you want. Great display piece.
Thanks Dan.
By far the most enjoyable video I've watched on youtube. Top Notch photography and brilliant work skills. Marvelous.
Bravo, sei un artista!!! Il risultato è un vero capolavoro, bravo bravo BRAVO!!!!!!!!!
I swear the noises in these videos are so satisfying 👌
so much better than doof doof music !
I love your videos. I admittedly have a short attention span and so most videos I watch are around 3-6 minutes. Yours, however, are somewhat hypnotic and never seem long. Something about the sounds and watching something old become new again is therapeutic. I feel the same way about the "Car Cleaning Guru" channel. His voice is soothing like Bob Ross and watching the cars go from grimy to new is wonderful. Thanks!
Good job! These videos are very therapeutic. I first watched the automotive videos but enjoy watching other things being repaired.
Nice restoration! Them tilleys are classics. A few things to note if you plan on using the lamp: The paint on the hood will not withstand the temperatures, hence why tilley enamelled to hoods originally. The washer and washer holder on the pump is the wrong way round ( the rubber should face the tank) and finally the mantle should be tied at both ends of the burner. Good luck.
Very Good points, I thought the mantle at the end was broken, but as not tied at both ends, which i did not realise in the video that may/will explain why i thought it looked broken.
Fantastic work and great video. Only things worth a comment from me i think is the Paint on the Top will not take the heat, it was enameled originally for this reason and the Mantle looks like it is, has been torn broken, however another poster noted that the mantle had only been tied at the top during the assembly and normally is tied top and bottom? In my experience of Mantles (not on Tilly Lamps) they normally only have one tie and like a bag or balloon shape, this said I have seen what "appears to be two ties being removed on some Tilly mantle assemblies. So Tilley's may have different mantles and fitting methods. Either way there is something wrong with the Mantle on the finished one and the one burning looks broken.
PS - looking at video again it can be seen that when the old hood/top is removed and turned over to see the old manttle or what is left of it it can be seen that the Original Mantle was tied in to places and the pipe was left passing through the manttle and the left OPEN.
This means the mantle fitted was the wrong type and not one for this Tilly lamp.
The one that is for this Tilley will have two ties.
A very interesting restoration,on a very good English product, you did a first rate job,and saved a very useful piece of equipment,you never know in this day and age when you just might needs it on a regular basis,you video gets my thumbs up
You go to camping and overnight you'll need this at night👍
One of the best and most detailed restorations I have come across ,video quality very good as well.
Thank you Jack much appreciated.
You have the patients of Job the way you work on the most minute details of the projects. Great work keep up the super job you do. Peace:)
This is a beautiful old lantern. The only ones I've seen here like that are either red or green Coleman lanterns. The brass makes this one look really special. Great project!
A pleasure to see someone doing a good job ! Thumb up, of course.
Dam that paint job you did was stand up !!! I love how it came out !!
Thank you!
I was hoping you'ed test it out. great attention to detail. looks great.
I really like this work that you do to restore objects that would probably be thrown away. Keep up the great work.
10/10 would not be able to reassemble. Great work!
Wow!! Excellent. And it works. Very well done!
Thank you so much for doing that little demonstration at the end! Keep up the great work excited for future videos! 👍
well Done. Good job on the dismantling and reassembly. The colours you used look very close to the original.
It looks pristine, very good job!
Smashing job mate, it looks like new. This has got me thinking of getting the old lamp from the shed and doing a restoration myself, trying one out anyway. Thanks for the inspiration!
Gorgeous and very functional! Awesome job!
I wish you made more Lantern Restore It videos. Lanterns are so cool!
Such a fantastic job on this one!
lovely job, hope all the paint hold up to the heat them lamps give off. used to use one of them when fishing in the winter as they come in handy to warm you up.
Each project you complete is so amazing! I love the details you put into everything. 👏
Its so satisfying to see that you are as perfectionist as i am you did so many things that i thought you wouldn't do because they werent that necessary but thats why i love this channel , great work as always dude keep it up :)
I've watched several of your videos, all of which seem to keep my attention. This particular video was satisfying in the fact that you showed the lantern glowing like it did when it was being used. For someone who seems younger than some guys I've watched on here, you really pay attention to detail. Wish I had you close by, I have a few things that could use your Midas touch! Keep up the good work!
Amazing old technology and great job!
best restoration channel as always 💯👍
Beautiful restoration
You are a master restorer.. 👍🏼
Great restauration. Last time i used Tilley was something like 20years ago in Finnish army. I remember that they are crazy bright and bursts into flames if not used properly.
WOW wow a real master at work
Very good, Thank you so much 👍 👍 👍 restoring 👌👏🙌
The way you suddenly speed up is astounding!
Why is polished brass so sexy?
Even brass with patina looks amazing.
You both need to make more videos.
I want a gf made of brass :)
Why is You so sexy?
chongtak....its funny cuz a "Brass" in England is slang for a prostitute
very very good job-with Polish-dobra robota!!!!
holy shit 165k subscribers already… couldve sworn you had only like 50k subs the other week
Sooo cool...very impressive! Thank you for sharing that work.
Thank you David!
Great job. I had one of these, got it from my granddad 40 years ago.
I was so "pumped" to see a new video uploaded. Awesome job man, as always!!
Illuminating. Great job!
That is very, very nice! I just love brass!
Very nice! Loved to see it lit up at the end, showing it's not just for decor!
Красавчик! Даже просто от просмотра, получаешь дикое удовольствие! Продолжай радовать новыми видео!
This looks really cool!
One suggestion: I'm not sure if this is the case with your mantles, but I believe you're supposed to burn them in by holding an open flame over them. They'll shrink to the size of the lantern and then you remove the flame. After this, you can pump the gas and then light the gas. This prevent the creation of holes in the mantles, providing a more efficient burn.
Great work, the finished lamp was stunning
Love Watching Videos Like This With No Commentary Words :-)
Liked the video before I even watched it, finally a Restore It video!!!! Keep it up bud.
Edit: now that I’ve watched it, I’m wishing there was a vote up button or a 5star scale. That thing came out bad ass.
Oh you remind me when i was 15 when we were at leeds city in 1981 my father buy this same candle our was red and black from the top
miss old days at uk i visit it last these 10 years and its not like the 80 or 90 all change any way thank you with love and peace from dubai
Conheci esse canal nessa semana e estou achando incrível! Parabéns!
Pretty dam good restoration there.
Great job! The spirit of the times is in the kerosene lamps!
Absolutely beautiful work
PAINSTAKINGLY EXCELLENT JOB
Lovely. And a brilliant restoration.
Beautiful! I even like how you lit it up at the end!
Great and interesting video as always! Cannot wait for the big project!
Very nice great job it now has a new life
You did a fabulous job!!!
Thank you!
Well done, good video on the restoration. Shoot and continue to these videos. I also began to try myself in the restoration of the video on the channel .👍👍👍
Looks perfect 👌 Regards Alex from Germany 😉👍
lovely lamp, lovely job.
Omg who else has been waiting on a new awesome video :D
Beautiful work.
Great video cant wait to see the big project.
I have one this clasic lamp, more old than this one...and still work... awesome job bro...
Nice man, they are very pleasant. and thank you,
What a nice piece for decoration.....
Beautiful. I wish I had your painting skills.
What a beautiful lamp, thanks for this video. :3
Nice! That's when things were built to last a lifetime (or more)
Beautiful work!
Beautiful job !
Beautiful lamp
Wow that was beautiful
big fan of you i see all your video..this one is amazing object
Fantastic job, really enjoy your video's.
I think you should also put the footage of the sand blast, is always satisfying to see. Great videos btw, instant subscribe.
Un mot! Félicitation... Merci pour cette vidéo...
Very well done! Love how this turned out! 👍
Beautiful job! You inspire me.
Master Craftsman! We'll done
Beautiful lamp, great job
Thank you!
Really nice finish, looks like quality
you should soak the leather pump gasket in some oil to protect the leather, it might revive the old gasket as well
Just a little trick I found out with my blow tortch!
Neatsfoot oil (like used on a baseball glove) works great for this.
CONGRATULATIONS !!!
Beautiful! Wish it was mine!
We used to have one of these
I like it
Great job
Just Beautiful
New to your channel... this was an amazing restore! Thank you for lighting it! :)
That ones a tough call. I would have left it aged, and just cleaned it a bit, but it's a personal preference. It does look pretty fantastic. I understand you're in the school of "renew", which is completely valid too. Particularly when done with such care.
Good work! I would of buffed that brass up a bit more though. Looks amazing what you’ve done though. I love the ambience these lamps give off.